General

Get help, share ideas, and discuss all things Lemur

Sign in or create an account to join the conversation.

Topics

Total Noob Questions

Hi there I'm having trouble getting started here. I have an iphone 5 and an ipad 1 - trying to get the ad hoc wi-fi connection with the lemur app and it just keeps dropping off. Is there any reason I can't just use the USB > iPad [or iphone] cable and connect directly? Thanks Ruke

Started by ruke on

3 replies

Updated

Troubleshooting

I'd need some explainations about Mu...

Hi everybody, I've finally got Mu to work on my iPad :mrgreen: Everything works like a charm, but there's something i don't understand, about the device controls. How do you make them work ? cos when i select the plug in or synth i want to edit through Mu, the page stays blank. I got the folder with the lemur templates of each plug ins & synths, but i don't know if i have to load them somewhere... And in the manual, they don't say anything about that, so i guess it is supposed to be automatic...…

Started by FloreMusic on

7 replies

Updated

Troubleshooting

Lemur not recognized/connecting (Ad-Hoc) in Public places?

I am a long time user of the Lemur, (since the legacy unit), and as soon as the Ipad app came out I picked it up, and it's worked fine for a long time now. I just purchased the new Macbook Pro retina, went to setup Midi in the Daemon as usual, also setup through ad-hoc network - everything working fine... while at home. When I went out to do a live gig this weekend, Lemur Daemon/Lemur Editor would not recognize the Ipad whatsoever. The Lemur was working perfectly and was connected even an hour b…

Started by tylerm on

11 replies

Updated

Troubleshooting

set x value for an object without sending osc message

In my Lemur setup, I need to have multiple sliders that represent the same value. What I want to happen is: if slider A changes, then slider B and slider C will change as well. However, I only want 1 OSC message sent to the computer. In Lemur 3, I used a script to set sliders B and C, and only one message was sent. In Lemur 4, it sends a bunch of messages because there seems to be some kind of feedback situation going on. It seems that slider A sends the OSC message, then sliders B and C send th…

Started by spluta on

2 replies

Updated

Troubleshooting

strange OSC fix (Mac)

Hello Folks, I have found a pretty strange fix for the iOS connection issue... Requirements: TouchOSC app, TouchOSC editor, Lemur, Max Start TouchOSC editor, click Sync TouchOSC.app won't find editor in TouchOSC app, set outgoing port to 8000, set incomming port to 8001, enter Editor IP manually Start Lemur app fun! Hope the fix remains to be stable...

Started by trhqx on

0 replies

Updated

Troubleshooting

How to use Switches to change the bitmap of a CustomButton

I have 4x2 switch object that I want to use to change a CustomButton's bitmap offstate to four different symbols according to which switch is on. How would I make this script? Thank you :)

Started by Jeshua on

8 replies

Updated

Troubleshooting

Launchpad remapper

I'm trying to get a Launchpad to talk to a Lemur app to translate what's coming out of the Launchpad to different channels/notes. Does anyone have an example of a Launchpad MIDI reader that works? I've been playing with this for a couple of days and am baffled why I'm not getting MIDI into Lemur from the Launchpad. Thanks, joeb

Started by joebataz on

4 replies

Updated

Troubleshooting

Livecontrol Midi Port Selection.

Hi there! I have been having a problem connecting TouchOSC with Livecontrol. I am installing this to Windows 7 64bit with a Nexus 7 tablet. The problem that I am having is that in this video : http://www.youtube.com/watch?v=4Fiwz5-neGk It is saying to use the midi port selection of "from Livecontrol 1", I do not have this option at all. Is there a tutorial to work around this? I've seen quite a few threads quoting this problem but nobody mentioned a fix. Is there a tutorial to install Livecontro…

Started by rxylab on

0 replies

Updated

Troubleshooting

Endless Knob as Jog

Hi, I am trying to controll jog move in traktor with endless knob. However, the values traktor accepts are in range of 0-1, and if I turn my knob several times lemur sends negative values or values grater than 1. I tried to make a script - when values get grater than 1 it sets x to 0 and when values get below 0, it sets x to 1. This works, but when this event happens I loose control over knob and movement, knob stops at new position and I must touch screen again to make it move again. May I kind…

Started by Rie on

6 replies

Updated

Troubleshooting

Problem with MultiSlider x vector

I'm drawing some values on a MultiSlider for a sequencer. I'd like to have the ability to change the length of the MultiSlider, and have the values shift properly. My goal is: - When the number of sliders doubles, use the original values for every other slider, and interpolate between the two previous values. Like - When the number of sliders halves, use average of the previous two values. I have buttons for halving and doubling the number of sliders. When pressed, they change the length of the …

Started by brianc on

7 replies

Updated

Troubleshooting

Griid connector doesn't work

HI guys I have lemur and Griid, lemur connects bud griid no. I make the connection, I start griid connector, I start Griid on the iPad, sometimes it sees my mac, so i click on it and I push GO but nothing happens. Once I managed to make it work with the DEMO version of ableton, but now with the registered version I can'T (I guess is not that the problem since the griid connector starts)

Started by martinpatino on

0 replies

Updated

Troubleshooting

iPad to Win7 ad hoc does not work

After purchasing Lemur I tried to connect to Win7 and had no success. Knowing that i had an old out of date network card in my desktop, i replaced it and was successful! All seemed good until the computer was rebooted the next day. Then the same issue returned. "Can not connect to network blablabla." No mater if I turn the wep on or off it does not matter. After much searching of the net and this forum, I am completely frustrated. I have now discovered that iOs has a known issue with ad hoc conn…

Started by Audio on

16 replies

Updated

Troubleshooting

Windows 8 editor

I cannot use the editor or daemon in windows 8 for months now, Can you please reply as to when you will have a windows 8 fix or compatible version? I am unable to use the product! Thanks, Rick Ratayczak

Started by rickrat on

3 replies

Updated

Troubleshooting

Cannot connect Lemur and Reaktor 5.8

Forgive me as I am pretty sure I'm going to be asking a question that has a straightforward answer, but I'm stuck. I cannot for the life of me get Lemur on my ipad 2 to connect to Reaktor 5.8, despite being able to connect to other OSC plugins without problem. I can run Xfer Records Nerve with the Lemur template installed perfectly in Ableton, but have no joy with Reaktor. I've followed the instructions word for word as far as I can tell on the page below: http://www.native-instruments.com/knowl…

Started by Northerner_V1 on

0 replies

Updated

Troubleshooting

OSC Max ans multicolored Pads

Hej, maybe someone kan help me with the following. Goal: I want to change individual pad colors in a pad object Attempt: The pads object is in multicolor (multicolor 1), its adress is /Pads and it should be abled to receive color information for individual pads. I've tried my luck with following messages over OSC: /Pads/color 64728469 6274963 .... 8728648 /Pads @color 64738197 17263718 ... 617283 /Pads/color s {64728469, 6274963} .... {8728648, 54675} /Pads @color s {64738197, 17263718} ... {617…

Started by trhqx on

1 reply

Updated

Troubleshooting

How to make pad send two note ons instead of a note off

Hi, I'm making small templates for each of Abletons built in effects. The first one I'm working on is beat repeat. If you are familiar with the device it has a repeat button that toggles the effect on and off. I would like to make the device momentary like the pad object in Lemur, but unfortunately Ableton doesn't seem to respond to note off. How would I go about creating a MIDI message that sends a second note on for when I release my finger off of the pad? Thank you! -Jeshua

Started by Jeshua on

1 reply

Updated

Troubleshooting

Lemur 4 editor crashing

Hi, Has anyone else experienced crashes with certain patches, when loaded into the editor? If I transfer the files to the iPad they seem to work fine there but not when either opened directly in the lemur editor or when downloaded from the iPad to the editor, either option results in a crash. I have experienced this with a few patches from the archive but one in particular that I can remember is the Waldorf pulse patch editor one. Many thanks Ross

Started by ipassenger on

3 replies

Updated

Troubleshooting

Changing a value to text

This is probably a simple fix, but I haven't found a way to exactly do this. I have a made a knob object with a grid set to four. I'd like each of the four numerical values, 0.000, 0.333, 0.6667, and 1.000 to be displayed within a monitor object but as text, i.e. 0.000 = a, 0.333 = b, etc. The monitor object of the knob currently displays the numerical value of the knob by just typing knob.x within the Monitor objects value, how can that be changed to something like letters?

Started by Jeshua on

2 replies

Updated

Troubleshooting

Setting Channel of a Knob/Fader

Is it possible to set the channel of a knob or fader "x" by using a script to change it, e.g. You have another a dial which sets the midi channel and overrides the set midi channel on the x variable within the fader/knob? I know you can do it using custom midi messages (as you would need one for each fader/knob) but that seems like a long way around it when you could just write a long script that overrides all midi channel settings of your faders/knobs in response to a midi channel dial. The scr…

Started by ipassenger on

3 replies

Updated

Troubleshooting

Help - WIn 7 not ports loop midi.

Help me, sorry but my english is very poor. I can conflic with my daemon in loop midi ports :S..... Tengo problemas que no veo los puertos para asignarle al ipad. http://img35.imageshack.us/img35/5816/sinttulofol.png Uploaded with ImageShack.us

Started by drereg on

3 replies

Updated

Troubleshooting

Mapping a Ring Area device

Let's say I have a Ring Area device joystick. I want to seperate it into 4 quadrants that do different things. I want the positive X axis (64-127 velocity) to send on one note and the negative X axis (63-0 velocity) to send on another...same deal for the Y axis. So I want the x and y axises to work on a combination of 4 notes...how do I do this?? I can't find anything in the manual to help.

Started by TPAd on

10 replies

Updated

Troubleshooting

Rename tabs in container

Hello everybody Iam not sure if its me, or what. But I hav'nt been able to locate the rename container tab funktion. It seems that a need to delete the tab, and then add it again if I want to changes the name. There must be a way to do it Thank you, and have a nice weekend alloede

Started by alloedee on

2 replies

Updated

Troubleshooting

Referencing variables of a "Reference"

Been looking into how to pull this off, seems trivial. Basically I create a references using getObject(), but I want to then reference that items "x" variable, but I seem to not be able too. For reference I would assume this: decl self = getobject(); self.x = {0,OSC_ARGS}; but that doesn't compile. I want to use references because I don't want to have to change a ton of script names because this particular object will be duplicated a bunch... What am I missing?

Started by psykel on

1 reply

Updated

Troubleshooting

mass spring stops working

Hi, mass spring objects work inconsistently. Everything working fine for a couple of weeks then mass spring devices become static. I've even tried creating new template with single device, doesn't work although perfect comm's between editor and iPad so it's not my template. Started working again after couple of days, was fine for 2 weeks, thought it was a freak incident but now not working again! So this has been the case on two occasions, once with previous lemur version and now with very lates…

Started by 0ct1v on

1 reply

Updated

Troubleshooting

(solved) Almost done! Please help with timing issue.

I am suffering because I can't get my scripts to execute in the correct order. I have a Multipads object that determines project-level Variable "r" when pressed. I also have 4 other project-level Variables (no1, n02 ,no3, no4) which are related to r by some simple math (ie. no1 = r+5). The same Multipad object has a different script that sends noteon messages based on the results of no1, no2, no3, and no4. My problem is that the order in which the events are triggered prevents the second script …

Started by mh175 on

1 reply

Updated

Troubleshooting

Lemur Mu crashes Ableton when opening Drum Racks Device

Using OSX 10.8 Lemur 4. Mu 1.2 Ableton 8.2.2 Lemur Mu crashes Ableton when opening Drum Racks Device. I tested other devices and only crashes Ableton when I open the drum racks device.

Started by 8bitslave on

2 replies

Updated

Troubleshooting

IGMP Proxy

I was having trouble getting Lemur on my iPad to talk to my computer via WIFI, via my router (not ad-hoc). The fix was to disable the IGMP Proxy on my router. Just wanted to share in case it is helpful for anyone else. Regards, -William Fields http://williamfields.com

Started by fieldswn on

0 replies

Updated

Troubleshooting

Editor and Daemon windows still bugged - WIN 8

The editor and Daemon windows are still not working in Win 8. The windows are lock to the top, you can not drag them down, and the editor still opens as a thin line (see screen) I have done a complete uninstall, clean and re-install. Same issue. Windows 8 64 bit (clean/new install) Lemur 4.01 Capture.JPG

Started by whatisvalis on

12 replies

Updated

Troubleshooting

Button Flash script

Greetings Can anyone help me with the script needed to make a button outline and text flash when it is switched on? B

Started by benwin on

1 reply

Updated

Troubleshooting

Midi lag

When i am using any of the ball type controls there seems to be a lag where mostly the y becomes very jumpy and inaccurate. They are all set to control change and both X and Y have a scale of 1 to 127. It also occurs if I using one of them and another type of control at the same time. It is happening in almost every application i set it up in.

Started by djevo1 on

1 reply

Updated

Troubleshooting

Another person who cannot connect Lemur Ipad to Mac (AD-HOC)

greetings. new user, but still pretty tech saavy. after a few hours of reading the forum here I see that I am one of those people who cant seem to create an adhoc network, and gain a midi target on the Ipad settings. Ive gone and watched the videos, and did some reading... ended at the Static IP method of getting the Ipad to actually sync with my mac. which in fact DOES work, but i am only limited to the sync in the lemur editor application... I cannot get the MIDI TARGETS on the on the Ipad to …

Started by djjoshuacarl on

6 replies

Updated

Troubleshooting

Lemur Daemon startup error

We just installed Windows 7 on a Macbook pro because of some problems we've been having with Ableton and Massive and now we're getting this error "Unable to use Direct3D, please install Directx" on bootup when windows tries to load the Lemur Daemon. I uncheck the start at boot check box in the Lemur Daemon and the message doesn't appear. Also when this happens the Lemur Daemon doesn't actually load and I then have to load it manually. I don't mind starting it manually when I start the computer b…

Started by Keithlostracco on

3 replies

Updated

Troubleshooting

Back into the editor

This is something I have been asking about and I've seen some pretty cool things reading thru the forums this time but I still haven't located this one. In my template, when it is running on the iPad I can save sequences of notes for playback BUT i can't get them back to the editor on the Mac. And when I make an edit on the Mac it blows away the sequences I written on the iPad. For me (maybe others) a feature that allows arrays to be written/read to a file on the iPad would be the best option bu…

Started by joebataz on

3 replies

Updated

Troubleshooting

Mu 1.2 Compatiable?

Hi there I've spent a couple of days trying to get Mu to run on my iPad but still no luck. I've followed the steps exactly like the instructions, youtube etc without success. Can anyone confirm if Mu is only compatible with Live 8.2.6 as I am running Live 8.3.3 on Max OSX 10.6.8, trial version of Max4Live 5.1.9, iPad 3 with Lemur 4. Any advise would be much appreciated as this is going my head in and if it's not compatible can anyone recommend an alternative template? Thanks in advance :)

Started by kellykingi on

3 replies

Updated

Troubleshooting

ipad connect to Lemur Daemon

I've updated to the latest Liine version of Lemur. My ipad and computer connect fine through adhoc to where I can easily update my iPad wirelessly from my computer (Jazz Editor). However, my ipad won't connect with the Lemur daemon and , consequently, Ableton. Usually my iPad would just automatically find my Jazz Daemon and everything works. I'm on a Mac 10.8.2 and I used the prior version of Liine Lemur all the time. Suggestions? thanks

Started by icebaby on

0 replies

Updated

Troubleshooting

Repost

I'm experiencing random crashes. Can't track it down to any one thing but here's the code. joeb LDJ.jzml.zip

Started by joebataz on

1 reply

Updated

Troubleshooting

Connection to ipad inconcistent

Hi, I've been sieving through the forum and found some info/ help but I'm still getting really frustrated. I seem to be able to connect ipad/ lemur app to my mbp very inconsistently, I have to create an ad hoc network everytime I want to use it. Most of the time it just wont be seen by the editor. Is there a way I can set up an ad hoc network that will save and not disappear every time I close down? and can it be set to auto connect? I followed a thread on here about auto connect issues that tal…

Started by Molloy on

3 replies

Updated

Troubleshooting

What am I doing wrong, this seems so basic...

(see attachment) I have a project variable 'var' I have a fader, 'Fader'. The fader has a 5 step grid. I have a pad, 'pad', that responds to Fader x position, and changes the value of 'var'. Code for Pad: if (Fader.x=0)var=1; if (Fader.x=.25)var=2; if (Fader.x=.5)var=3; if (Fader.x=.75)var=4; if (Fader.x=1)var=5; What keeps happening is that var gets stuck at 5, and every time I hit Pad, Fader jumps to 1. Bug.jzml

Started by mh175 on

2 replies

Updated

Troubleshooting

Lemur editor crash

When I tried to load some template (1 out of 3) in Lemur Editor 4.0.1, either by dragging or opening the .jzml file the software craches everytimes. I am on a windows 7 environment with Ipad and I've tried it on 3 different computer. exemples: Mashy crashes but Traktor Pro doesn't Can anyone help me or have the same problem.

Started by futil on

7 replies

Updated

Troubleshooting

not receiving midi from ipad

when i do something on ableton, it affects touch osc, but when i do something in touch osc, it doesnt affect ableton. my ipad does show up in the connected device field in live control but i get no midi signal in ableton when pressing butttons in touch osc. please help me

Started by strobe iw on

2 replies

Updated

Troubleshooting

Mu 1.2: no device editors are displayed

I currently have Mu 1.2 installed with Ableton Live 2.3.4 & M4L + Max 6.08. iPad 3, iOS 6 I've copied the MU 1.2 directory into the Max 6/Cycling '74 directory, and have opened the amxd in Live. The Mu template is successfully loaded to the Lemur app running on the iPad. I can launch clips and control the transport, set panning, and operate a few other controls successfully. However, there are also a few problems. When I try to select a device for editing, the device controls never appear on the…

Started by adamlwatson on

3 replies

Updated

Troubleshooting

MULTIBALL Question

Hello again! Is it possible to have a "break point" beaviour but with a multiball? Like if there were a string between the balls? How do you do that? Thanx

Started by jenz on

3 replies

Updated

Troubleshooting

SET A BUTTON SCRIPT FOR MULTIPLE SLIDERS

Hello all!!! Suppose I have 8 sliders and want to have one button that sets an atribute grid on and off for the 8 sliders, how do you do that? Thanx!!

Started by jenz on

2 replies

Updated

Troubleshooting

Setting a cancel button

Is there any way to, when setting a button to on, sending a script to set another 1 or more buttons to off? B

Started by benwin on

3 replies

Updated

Troubleshooting

Problem Ambivalent Beat :(

Hello As a lot of user I ve this problem of send / receive with Ambivalent Beat and my windows 7. I ve the clock on the Ipad and the light pad run, but no send to Ableton ... I ve you solution please ? thanks a lot ( sorry for my english, im french )

Started by benjth on

9 replies

Updated

Troubleshooting

newbie help! Visual feedback!

Hello, and thank you in advance! I am trying to do something I imagine to be incredibly basic, but failing... I want to set up a series of pads or switches that light up when triggered by an external keyboard (easy enough) BUT then un-light when the key is released. I have gone through the manual and am now pulling my hair out. Surely it has something to do with making note on velocity retrigger the pad/switch light when it reaches 0... but what... arrgghhhh!! Any help, and anyone who can point …

Started by devilwidget on

9 replies

Updated

Troubleshooting

Different function for each button press

Hello, first post, I know this is a simple question, I have tried searching but it is too broad a question to easily search for. I need a basic setup to trigger then release lighting cues via OSC. How do i configure a button to send one OSC command when "turned on" and another OSC command when i "turn off" the same button. I have tried using both a custom button and a switch, I can see how to choose when the message is sent, leaves 0, gets to 0 etc. but how do you produce different functions for…

Started by benwin on

3 replies

Updated

Troubleshooting

Can't detect/select MIDI ports from Lemur Daemon/iPad app

Hello, I am using Windows 8, and trying to connect via Wi-Fi. Both iPad and laptop are on the same network. Loopbe30 is running and Internal MIDI ports are enabled. The iPad app does not detect them though. And in Lemur Daemon, I can "Add" the Internal MIDI ports but then there is no "Destination" for them to connect to. What am I missing here? Thanks, Ishaan

Started by ishaan on

4 replies

Updated

Troubleshooting

Mu Custom Modules problem

Yo! having problems getting the custom modules option to load I have followed the instructions exactly: Copy the "Custom Modules" folder to \Mu\Resources\DeviceControllers - Copy/Paste the content of "Example.maxpat" into Mu.amxd (to do that you need to edit Mu.amxd from Ableton) - In Ableton, drag and drop the "Mu_Custom_Modules.jzml" in the Mu when you open the example.maxpat it loads up two windows, do you copy and paste both sets of objects into the .amxd, I did try both? Just get 'file fail…

Started by scrubber on

5 replies

Updated

Troubleshooting

lemur - auto-connection mac problem

probably one of the most asked question here. did some research here in the forum, but couldn´t find an answer. i´m having problem to auto-connect my lemur running on ipad1 ios 5.1.1 to my mbp osx 10.6.8 lemur editor. in lemur editor on my mbp pressing LEMUR CONNECTION ( alt+c) won´t do anything, but typing-in the IP adress of my ipad manually works fine. why is that? how can i solve it? it´s not really a problem to check my ipads IP and to type it in manually, but it´s pretty annoying...

Started by monoaural on

10 replies

Updated

Troubleshooting