General
Get help, share ideas, and discuss all things Lemur
Sign in or create an account to join the conversation.
Topics
Using knob to control LFO rate in Operator
This is my third day using Lemur or any type of controller for that matter, so bear with me. I've been able to get knobs to control macros on Live, increment by increment, it works fine. Now I have a sound coming through Operator in Live, and I want to control the LFO rate with a knob, except when I MIDI Map the knob to the LFO, it doesn't let me move it in increments. It just goes from the minimum value when I am not touching it, to the max value when I am pressing it, no matter where the knob …
2 replies
TroubleshootingAlt Fault ?
hello again i'm trying to give lemur another go to get it successfully into my workflow, to do that it requires a bit of setting up, sorting out a couple of years ago i asked a few simple questions and got nowhere to be honest, left me in a bit of a checkmate state i've hacked a few solutions together over the years but nothing to build up a head of steam so, i'm back at ground zero help ! this is part of a question i posted a couple of years ago, is it me or is this broken Q) the alt keystroke …
2 replies
TroubleshootingCannot drag to Library !
No matter what I do, even trying other key modifiers I *cannot* drag things into the library, i also have a lot of issues with every other command involving Alt Q ) Can you drag custom objects to your Library using Alt on a mac ? Q 2) Why can't I, any ideas ? Lemur 5 OSX 10.6.8
2 replies
TroubleshootingLemur 5 as a slave in Live
Hey all, I've been trying to noob around the documentation and the forum, but i have trouble understanding some things about the new sequencing objects and how to midisync them with Live. I wish to build sequencers in Lemur, and have them sync to the clock sent by Live. To sum it up. How do i sync Lemur clock to Ableton? : Marko
3 replies
TroubleshootingMac: lemur ports do not appear in Lemur [solved]
just recently I discovered that all virtual MIDI ports on the Mac do not appear in Lemur. Only the virtual MIDI ports of Windows machines appear. The connection Lemur-Mac is fine, and using Lemur with OSC works as it should. Also the editor. So it is only the MIDI that seems to be broken. And reading this post http://forum.liine.net/viewtopic.php?f=32&t=3055 it seems it is a general problem, even with hardware ports (CoreMidi). I run a beta version of Lemur editor/daemon, and tried to install v.…
6 replies
Troubleshooting"Omni" OSC send?
Hi, I don't think the current Lemur Editor interface allows for this, but in terms of a workaround, is it possible to sort of "omni broadcast" to all of your listed OSC destinations? I've been working with a "one Reaktor Ensemble to one Lemur layout running on one iPad" type configuration, but I'm trying to let that OSC stream be accessible to other computer for mapping type stuff too. And you can only pair your Lemur objects to one output destination. I tried to see if I could maybe just send t…
1 reply
TroubleshootingSend OSC message on interface change
Hello everyone! I've been messing around with some expressions, because i want to send an osc message everytime there is a page change. I found this thread https://forum.liine.net/viewtopic.php?f=25&t=3110 which helped a lot and i have it working by now, BUT this is only working when i have the editor connected to the ipad app, as soon as i press stop and no connection is made between editor and ipad app, the OSC message is not sent anymore... any clues on this???? i have finally made a workarou…
0 replies
TroubleshootingMIDI virtual port disappearing sometimes :(
Hi there, I'm facing a BIG problem for me. Trusting Lemur App, I based all my next performances on it. If I had no problem with OSC, I have had a lot these days with MIDI Virtual port. Sometimes, VERY often, all my midi virtual ports are disappearing from Lemur Daemon and obviously, I'm loosing my MIDI connection ... My version of Lemur Daemon is 4.1.1 My OSX is 10.9.2 (but was the same on 10.9.1) I really need help here as I have to be safe for my next performance
3 replies
TroubleshootingLoosing connection to iMac
Hi, newbie question: I keep on loosing connection between my iMac 12.2(os 10.8.5) (running only lemur editor) and my retina iPad running only lemur app....obviously I cannot kill the blutooth-connection to my mouse and keyboard...is that a problem? I have not yet tried if connections are better with the MacBook Pro 8.1... ? best regards Audun
2 replies
Troubleshootingbasic for loop fail
Ok, I've been banging my head against this kind of thing in Lemur and I need to ask -- why can't a simple for loop work for any value higher that about 7700? what I mean is -- if you have code like this: for(i=0; i < 7000; i++) Monitor.value = i; you will see 6999 in the monitor. Change 7000 to 8000 and you'll see 7691. If I have other things running ("on frame" scripts, etc) I usually can't go any higher than 5880. Why can't Lemur simply execute the for loop for as many iterations as I specify?…
3 replies
TroubleshootingLemur overriding hardware controller!
Hey guys, Okay so I am using traktor with the Kontrol Z1 and X1 hardware controllers. I want a lemur template to control FX 3 and 4 ONLY, and leave FX 1 and 2 to my hardware controls. So far every template Ive gotten for traktor fx overrides my X1 controls of fx 1 and 2. I am not very tech/programming/mapping savvy. Can anyone recommend me a template that will only control fx 3 and 4. Or could someone point me in the right direction to learn how to map my lemur app and X1 so that they control se…
0 replies
TroubleshootingInconsistent MIDI Mapping Button
Hi all, I originally posted this question in my first post in the introductory question but have been advised to post it here instead. Basically, my first very basic question is, how to I get consistent behaviour from the MIDI Mapping button in the Lemur Desktop Editor? Sometimes I click it and I can see what I've just done, other times it remains blank and unresponsive, please help. Thanks
5 replies
TroubleshootingHow do I disable custom midi messages sent on load
Hi, I've been using custom midi messages to implement an MPC-style sampler, and synth keyboard, sending MIDI note on / note off data to Ableton Live. It's a very powerful feature indeed, and works really well. I have a problem tho - all the PAD & keyboard notes I've configured are automatically sent when the Lemur template is loaded, so triggering all the samples and synth notes in Live! What a noise!! Is there any way to disable this? Thanks in advance, David
0 replies
TroubleshootingKEYCOMBOOUT?
I'm wondering how to use this script. I'm merely wanting a custom button (pad) to send a SHIFT + TAB to Ableton.
13 replies
TroubleshootingKBMOUSE issues
Hi folks! Need a little help getting my head around programing the Lemur (iOS). Im working on a Mac, running Logic X. I got this cute little thing: http://bildr.no/thumb/bUppMHNu.jpeg I need it to do two things: 1) Send MIDI CC and 2) Send key commands/combinations. Every button there is a custom button that sends a unique CC, and when i set the ports in the Daemon and in Logic, I get MIDI CC in to Logic. Brilliant. But my head obviously has a malfunction of sorts, because i cant read from the m…
0 replies
TroubleshootingWeird Keycomboout behavior
Hello, as part of some greater project I wanted to introduce some basic buttons used in everyday work using keycomboout. The problem grinds down to this simple setup: So I create two pad type custom buttons - one is supposed to send a CTRL-C and the outher sends CTRL-V . Simple as that. Easily done - each button has a script attached that fires on Expression X : CTRL-C keycomboout(0,1,0,0,67); CTRL-V keycomboout(0,1,0,0,86); So what happens when I connect my Ipad to this is, that it seems execut…
1 reply
TroubleshootingMultiball-eachball
Hi guys, i spend all day to try to set a default position for each ball... what i want is one button able to set different position for each ball. I've tried in many ways: - Cut() multiball.x=32 (multiball does not be affect as fader do) - Setting different Control Change with one value that go to affect for feedback multiball. It's not stable.... balls move around :lol: Anyone knows?
2 replies
TroubleshootingArray in script vs. in object
OK - I've been banging my head against this one from time to time and I just have to ask -- I have an array of numbers. There's about 75 numbers in the array. Including commas and braces, the total character count is around 220. If I declare a variable in a script, I can use the array just fine. However, every script that needs it requires me to copy and paste it into that script. If I try to abstract it up to the container, the Lemur Editor environment tries to 'pretty-print' it by adding space…
0 replies
TroubleshootingFader Script to Select Tabs
Hi, I'm trying to sort out a script.. I want the position of a fader to determine the selected tab of a container. This is based on a MIDI message sent to Lemur from my DAW (not my manual movement of the fader) and it doesn't necessarily even have to be a fader, just something that can select a tab based upon the current position of a particular CC value... Here's what I'm currently working with: if(firstof.x>=0.75) selecttab(ContainerDiva,0); else if(firstof.x>=0.5) selecttab(ContainerDiva,1); …
7 replies
TroubleshootingHow to use monitor ??
Hi everyone Before asking my question, i have to introduce myself and the reason i use Lemur. First sorry for my english, i hope everyboby could understand what i say. I'm a sound engineer, so i want to use the Lemur to control some Fx in Live like Granular delay, LX480, flanger and disto/filter like Wow 2, as this i coukd use really dynamic fx during the show. As i'm a newbie, i don't understand a word about OSC, so if someone could give me some stuff to read about, it will be great. So right n…
7 replies
TroubleshootingReading Midi CC
Hi guys, i don't know how to read MIDI IN with slides or faders. Basically i'm receiving on my lemur via iRig ' 13 ch10 ' i want to be able to see the fared move in feedback with midi13 ch 10. Anyone???
2 replies
TroubleshootingGroup buttons Only allow one active at a time
Is there a way to take a group of basic buttons that each send a different midi note signal out and only allow one to be selected at a time. For example: If you have a group of 3 buttons: Button 1 Button 2 Button 3 Let's say Button 1is currently selected (hilighted). I want to be able to press Button 2 and have Button 1 then become deselected (unhilighted). Any help is really appreciated. I';ve been scratching my head on this.
2 replies
Troubleshootinghow to send two control change with one button?
HI guys. Anyone know how to send two control change with one button..??? thanks
2 replies
TroubleshootingUsing menu to select midi cc number output by multislider
Hi! This might be dead easy but I just can't figure it out. What i'm trying to is to make a stepsequencer which outputs values 0-127 on a selectable midi cc number. I've used Midi CC Sequencer by Sean Edwards as a base, and so far I have been able to control the midi cc number it outputs with a fader and a knob, and CC selector by bxsj. However, I would like to have a menu object for choosing the midi cc number, since i won't need every value between 0 and 127, but only certain values like 74, 7…
4 replies
TroubleshootingLiveControl 2.12 Midi Clips in Sequencer Mode?
LiveControl 2.12 is generally working well with Ableton Live 9.1.1 with one exception: I can't edit midi clips in sequencer mode. Does this work for anyone? It should be as easy as selecting the midi clip and switching to sequencer mode, no? Am I missing something?
0 replies
Troubleshootingmultiple instances of the same plug-in, one template?
Hi, i´ve build two templates with OSC and total recall, works fine so far. how could make these templates able to talk to more then one instance of the plug the templates are written for? it would be great to switch the statuts of the template when i change the tracks in ableton. any pointers in the right direction would be great, thanks!
2 replies
TroubleshootingOSC Feedback Loop Problem
Hi, i´m having a multislider in Lemur controlling a mutlislider in m4l and vice versa which gives me a feedback loop. i had the impression, that lemur objects do not send their OSC values when they´re remotecontrolled from m4l but it seems i´m wrong. is there any elegant way to deal with this? i tried custom OSC messages in a script but it didn´t help. thanks, dbk
4 replies
TroubleshootingBreakpoint HoldX/Y problem
Lemur 4.1.2 on iPad 4, Lemur editor 4.1.1 on Windows. Note - an even easier way to see the issue is to create a breakpoint in a new project, move the points around, and then simply set holdX or holdY to 1 in the behavior tab. The manual says that each breakpoint can be held by using a vector and that does seem to work, but the extra lines on the screen are quite unfortunate. I have some code that is manipulating breakpoints. I want to move them programatically and not allow the user to move them…
5 replies
Troubleshootinglive control 2.1 & Ableton Live 9.1 problem.
Hi there, after i updated my ableton live daw to version 9.1 lemur live control does not work. After that, i updated live control 2.0 to live control 2.1 but nothing fixed. Before 9.1 update, lemur, live control 2.0 and ableton 9.01 was working great. Does anybody knows why or have the same problem? Thanks.
7 replies
TroubleshootingLemur with Pro Tools?
Hey everyone, I am a newbie and out of respect of trying not to be a nuisance I really hope this question hasn't been hashed to death already, although can't seem to find ANY information on the subject. Can anyone tell me if there's a way to connect Lemur to Pro Tools (v10, Mac, Black Lion Mod 002 rack) to control faders, pan, plugins, etc? I've tried everything i can find, including adding OSCulator software to the chain, as well as downloading the old CS-10 controller driver, and using the old…
13 replies
TroubleshootingChange dinamically midi channel from Switches object
hallo, how can i change channel out of "Switches1" object using a "Switches2" object? When "Switches2" is ON, "Switches1" outputs CC in channel 1, when "Switches2" is off, "Switches1" outputs CC in channel 2. i hope this is easier and clearer, the other thread i wrote is just a mess (i had never tried to solve something in a forum, and had so many fail attempts and misunderstandings in a single post!). one thousand thanks. david Switches Change Channel.jzml
1 reply
TroubleshootingSwitch ON/OFF Switches midi out
hi! i wellcome myself to here. i hope you can help me to sleep better today. i¡m very new to this, and just can't find a solution or anything in the forum. i have a "Switches" object that sends CC in channel 1 target 1. as i don't have bidirectional midi from the looper app i am controlling (loopy), the switches don't show if the loops are playing or not. i want to be able to mute or switch on/off the midi out of this "Switches" object, so i can turn on/off the switches with my fingers (taking a…
16 replies
TroubleshootingLemur not recognizing compliant device (Akai EIE)
Lemur will not recognize the Akai EIE interface while every other app has no problem. Auria, DAW, all Synth apps and most importantly MidiBridge all find and utilize the Akai EIE with no issues. Its one thing that Lemur doesn't recognize the EIE, but when i plug it into the CCK, all the other targets disappear from the list of available targets, making it impossible to use MidiBridge as a bandaid to this issue. This has been mentioned in the forum before but was wondering if there was any progre…
2 replies
TroubleshootingTrouble with Wifi Midi, iPad and Mac
Hello all, My son got an ipad for Christmas and I thought i would take up the great sale offer on Lemur 8-) I am trying to get LiveControl 2 up and running, I have watched the vids and have tried to get it all going as per the tutorials, though I am stuck at first base. I can't get the ipad to connect to the Wifi network I have created (as tutorial) What may be a cause for the AirPort symbol not appearing after set up? Any help would be greatly appreciated, thanks in advance! Running: iPad (pre…
2 replies
TroubleshootingHelp needed: Ableton Live 9 + Max For Live + lemur
I'm trying to get ambivalent Beats working with Ableton Live 9.0.2, latest version of Max for Live and the latest version of lemur on my iPad 2 I have set all IP addresses and ports, made sure there are samples in the bottom of the drum rack in live. I manually put the template in lemur, as ambivalent beats cannot send it. (get the error message ) although on clicking play in ableton has lemur showing it is running (the pads are lit in turn). Communication with the lemur demon between Ableton an…
2 replies
Troubleshootingcontrolling LEDs with OSC from m4l?
Hello, recently i finished an OSC template for the ml-185 stage sequencer, an m4l implementation of the famous ryk sequencer for the roland system 100m. So far everything works fine *applause* but i can´t figure out how to light a row of 8 LEDs through OSC. As if this wasnt enough, there would have to be some timing becuase the stage sequencer can stay on a given stage for up to 8 ticks and there are various modes: one example, on the "hold" mode, the LED would have to stay on as long as the sta…
6 replies
TroubleshootingLoop Midi does not receive signal from live control 2
Hi, Iam trying to connect live control 2 with ableton 9.1. I have downloaded latest liine lemur software and loop midi. Loop midi does not receive signal from live control 2. It receives only output from ableton. ( when i push ableton's buttons, loop midi port data numbers grow, but when i push live control buttons loop midi port data number stays to 0 ) So it can not be conected with ableton. My settings are just like showing in live control 2 guide. Does anyone have the same problem with loop …
0 replies
TroubleshootingConnectivity problems between Editor and iPad... please help
Hello, I just bought the Lemur app and I've read all about connectivity issues between the Lemur editor and the iPad, because I have them. After setting up the ad hoc network between my Macbook Pro and my iPad, I found my iPad IP addess and manually entered it in the text window that pops up when I press "play" in the editor, which connects Lemur Editor and Lemur App. (I have to enter my iPad IP address manually because Lemur Editor does not see my iPad and offer it as an automatic option in thi…
0 replies
TroubleshootingScripting 'Bring to front'?
Is there any way to programmatically manipulate the stack of objects? I'm specifically looking for a way to bring an object to the top of the stack from inside a script. I believe I can accomplish what I want to do another way (maybe), but it would be cleaner if I could simply use 'bring to front'. thanks
4 replies
TroubleshootingMidiclock
I guess the solution is really simple but i just can't find it. I want a random function on a fader that changes with say every quarter note. Synced with midi clock to ableton. Now I know that midi clock sends out date 24 times each quarter note,so if i take a monitor and give as input "midi_clocks[0]/24" it changes every quarter note. However, I just can not get this to work within a script or an expression. Has anyone an suggestion?
5 replies
TroubleshootingTouch Events
Hi, is there a straightforward way to send Touch Event Messages via OSC? There is a global option in Touch OSC that, when enabled, sends touch start (1) and touch end (0) messages for all controls, including multi-touch objects. It adds a /z to the control address containing the value, details here: http://hexler.net/docs/touchosc-configuration-options How would I do this in Lemur? Would I need to script expressions on each object (using the indices of multitouch objects) to achieve the same eff…
1 reply
TroubleshootingCustom OSC Messages?
Hi there, i´d like to remotecontrol 4 radiobuttons in max4live with osc. i´d know my way around with custom midimessages in lemur, so i wonder if there´s such a thing for custom osc messages which i could call in a script? i wouldn´t know how to adress a specific button out of four with OSC. any help would be great, thanks!
1 reply
TroubleshootingCut() script into container. Please Help!!
Hi there, I need a custom button able to set a x value; with this exspression in a custombutton: Cut() on exspression FaderA.x=1 :i'm controlling easly Fader A. Schermata 2013-12-04 a 20.49.45.png ------------------BUT--------------------- IF i move custombutton out of the container, it isn't able to work. Schermata 2013-12-04 a 21.00.16.png Basically i don't know how to write it. I tried i some many ways..... but i don't know phyton.... I hope someone can help me. Thank you very much
4 replies
TroubleshootingTutorial on USB MIDI Setup?
Hello! The manual's section on USB MIDI setup points me to the videos on Liine's 'Support' page, however there is no video on setting up a USB connection. Could someone point me in the direction of this video or another tutorial on USB MIDI setup? I am using an iRig MIDI interface which plugs into 2 ports on my Yamaha USB MIDI interface. I am trying connect the editor and Lemur to begin with. I am having absolutely no luck with Lemur so far :oops: Many thanks!
3 replies
Troubleshootingfirstof on Padobjects
Hello, is firstof(x) working differently on padobjects than on switch objects. I have 1x16 pad Object and want to use the firstof(x) function to get the pad pressed but it doesnt seem to work. padpressed=firstof(x); MultiSlider.x[padpressed]+=incdec1; What is weird is that when i slide over all 16 pads the monitor shows the right value for the padpressed but when i press a single one i dont get a value. Any insights to this?
0 replies
TroubleshootingMultiball question
Hy, I have a question about the multiball object. Im working on an experimental project, and would like to control a few parameters in Live with multiballs. Is it possible to set up the multiball object that still send values after releasing my finger from the screen? Normally it stops...if I uncheck XYZ will move, and Im able to "poke" the balls, but no value sent...
2 replies
TroubleshootingOSC connection
Hi all, Been very busy so I haven't been on the forum in a while. My Lemur app has been kicking butt and getting lots of positive feedback. So what do I want to do???? Break it of course..... Not really, it's just that I need to get away from MIDI and embrace OSC. I've run out of MIDI addresses that don't conflict with other devices and MIDI is starting to be too slow. But I all these photons, electrons and high level audio must have scrambled my poor little brain because for the life of me I ca…
9 replies
TroubleshootingHow to sort an LED array backwards quickly?
Hello, i want to diplay the Mixer Vu Meters of Reason (sending CC values from 0to31) as 16 segmented LEDs. But currently the LEDs light from the top to the bottom instead of bottom up. I tried reverting the scaling but that didnt work. But what would an efficient script look like?
6 replies
TroubleshootingDouble control on one parameter
Hi Very new to Lemur. Does anybody know of a way to have two different controllers (i.e. a knob and a multiball.x) make a control change (MIDI) to the same parameter, and have them relate or"update" to each other? Just chewed my way through the whole user guide, but no dice, that I can find. Any help would be greatly appreciated, as this function is key in my setup :) Thx a lot Clawsome
2 replies
TroubleshootingCustom Midi for a 4x4 PadObject
Hello, i have a 4x4 Pad Object and each Pad should send a different cc# at value 127 and a dynamically changed channel (thats why i need the custom Midi). In the normal Midi tab i can simply enter a range of controllers according to the number of pads (thoughi cant enter a variable for the channel). But what do i insert into the controller field of the custom midi? Is there a way to enter a range of ccs? I can allways use 16 custom midis but i would like to use just 1 with some array magic in th…
2 replies
Troubleshooting