General

Get help, share ideas, and discuss all things Lemur

Sign in or create an account to join the conversation.

Topics

Colors

Hello All, Whenever I attempt to change a color or an object, as soon as I click the box that brings up the color palette to change, the whole Lemur editor screens shifts to the left showing about 30%. Once it does so, I have to mouse it back to my screen. It is on an extended desktop, does that make a difference? Thanks, Magno!

Started by DJMAGNO on

1 reply

Updated

Troubleshooting

Midi Targets disappear when connected to X-Station

My old iOS setup was a crappy Alesis (pre-iOS) USB mixer, a USB/Midi cable, and a midi controller or two all connected to a powered USB hub, which was connected to my iPad 4 via the CCK. All worked flawlessly when using Lemur. I've since simplified that with just my X-Station (connected to the powered hub to lessen any power draw from the iPad), but the principle is the same. I'm quite happy with this setup, no lag or other issues, other than that I just noticed that Lemur stops supporting any m…

Started by recycledcity on

4 replies

Updated

Troubleshooting

Just trying To Connect

Hello am hoping that some of you more knowledgeable members can help a brand new noobie, trying to get started. Basics are Win7 64bit PC, Ableton 9.1.3, Lemur Editor 5.0.3, Lemur 5, Lemur Daemon 5.0.3 and LoopMIDI 1.0.5 Have setup AdHoc Network using the IP addresses given in the DesertSound tutorial recommended by Liine, iPad has address of 192.168.4.60 and the PC Adhoc IP is 192.168.1.4, and it all seems to be OK. Both are Static addresses. They both to talk to one another via a USB Access poi…

Started by shutthatdaw on

0 replies

Updated

Troubleshooting

Reset Ableton Effects Rack Button

Hi, I am pretty new to lemur other than doing the really obvious stuff so apologies in advance. I have searched the forum can couldn't find a reference to my problem. I am wanting to have a reset all button on lemur (iOS), that will allow me to set all 8 parameters of an audio effect rack to 0 position. I would create 8 such buttons, one each to be able to reset the effects on each of the 8 channels I use for my live set. The scenario would be if I had done some mad tweaking and have for example…

Started by sphillpo on

4 replies

Updated

Troubleshooting

preventing midi talkback from messing with scripted actions

I have a knob set up as a DJM mixer style filter. I have a script that returns the knob back to home (0.5) when i sweep the filter up (for example) and let go of the knob it executes the script and returns the knob back to 0.5 in about 1 second. problem is...sometimes midi is feeding back from ableton and messing up the knob position. i don't want to disable 2-way midi cuz it's awesome. Is there a way to prevent midi talkback the from messing with scripted actions on controls?

Started by mssngmrblz on

12 replies

Updated

Troubleshooting

Manually Entering Color Values (RGB,ect)

I am trying to create a template which contains various colored objects that correspond to the same colored items and tracks in my DAW. This is for easy visual representation. For the sake of consistency (there are often several shades of the same color), I would like to be able to simply enter the RGB or HSV color values. Exploring the forums, I realize several people have expressed wanting the option to do this within the color picker menu but it is not currently possible. Hopefully that will …

Started by Emerson on

11 replies

Updated

Troubleshooting

Anyone with knowledge of the euclid algorithm

I am trying to generate an array were Pulses/Gates are distributed over a number of Steps according to the euclidian algorithm (Pages 3 and 4 in this PDF https://ics-web.sns.ornl.gov/timing/Rep-Rate%20Tech%20Note.pdf ) I have therefore built an project with a Steps and Pulse Switch for selecting the number of pulses and steps and 2 functions according to the abstract (euclid(steps,pulses) and makearray(level). Now it generates something but it is all rubbish. If anyone ever came across that algo…

Started by electrofux on

6 replies

Updated

Troubleshooting

Evaluate a string to run a function?

Hi, is there a way of running a script from a string - so for example at right now, I'm just using if(): if (x) { pgm1(); } else if (y) { pgm2(); } else if (z) { pgm3(); } whereas I'd prefer to do: evaluate('pgm' + currentPgm + '();'); is there a way of doing this? Many thanks! Rufus

Started by RufusWhite on

0 replies

Updated

Troubleshooting

Simple count down with monitor and midi clock - help please!

dear all, tomorrow i have a performance, and i would like to do a simple thing, but i am not able to accomplish it. i want this monitor object to display a count down from 120 to 0, using midi sync clock of ableton live as source. the ideal would be to have a count of 2 minutes and seconds, but i now this would take more work, so i would appreciate if anyone out there can help me to write the script that would display 120 when i press play in ableton live, and start counting backwards to 0. here…

Started by eccecello on

6 replies

Updated

Troubleshooting

Why are my LEDs upside down?

I'm working on a mapping for traktor's remix decks. One of the outputs from traktor is the pre-fader volume of a remix deck slot. As best as I can tell, it ranges from 0 (no volume) to 127 (full volume). But when I wire this up to an led object with 1 column and 16 rows, the meter goes from the top down, while I want it to go from the bottom up. I've tried inverting the value coming out of traktor but that didn't seem to work. I also swapped the on/off colors for the led but that presents a new …

Started by j5k on

1 reply

Updated

Troubleshooting

String concatenation and arrays

Hello, can i access distinct array items through the setexpression function or do i have to write the whole array in one go? something like: setexpression(currentobj,'values ',check[0]); Or anything similar since the above doesnt really work.

Started by electrofux on

6 replies

Updated

Troubleshooting

FORUM - Post Reply Notifications

Hi There, For some reason I don't receive post notifications, I've checked my User Control Panel/My Suscriptions, and I can see all the posts there. Any idea? Thanks in advance,

Started by lABl on

0 replies

Updated

Troubleshooting

VCA style control group fader

Hi Everyone, I'm working on a template to be used in a live sound environment allowing musicians to have remote control of their monitor mix via OSC. Due to the large channel counts and not wanting to overload the musicians, I am trying to find a way to allow them to adjust a group of values simultaneous while retaining the relative balance between them. e.g. They have 5 drum kit fader (Kick/Snare/Hats/Tom/OH). They adjust these 5 faders to obtain the desired balance of the kit. Then they want t…

Started by jonhems on

16 replies

Updated

Troubleshooting

Uninitialized variables that use clamp don't persist

I understand the way to save a variable value is by leaving it uninitialized, so that when I shut-down Lemur, the last value persists when Lemur is loaded up again--- so long as I saved the changes on the iPad. But when I use "clamp" to restrict a value, the variable always resets to 0 on startup. I need to be able to save a value's state for recall, but also restrict it to a range of -1 to 8.

Started by mh175 on

2 replies

Updated

Troubleshooting

MultiBall and MIDI CC assigning of non consecutive #s

Hey, my question has to do withe the MultiBall and needing to know how to set MIDI CC numbers for the balls that are not consecutive. How do i do that? It only lets me assign a range of CC#'s that are consecutive (i.e. CC #5 through 7 if i have three balls, but what if i want to make it lets say #5, 7, and 9 see how those arent consecutive?)

Started by indijinouz on

0 replies

Updated

Troubleshooting

Monitor module question

I'm using Lemur with Ableton Live, via MIDI. My problem comes up when I use the Monitor module to display the value of a fader in Live which is controlled from a fader in Lemur. When I use the mouse to move the fader in Ableton on my computer screen, the Monitor module in Lemur shows the value changing smoothly in real time. No problem. When I use my fader in Lemur to control the fader in Ableton (which is what I use Lemur for), then the Monitor module doesn't show any change in value until I st…

Started by neil on

6 replies

Updated

Troubleshooting

Connecting with Live OSX

Hi All, With LiveControl not working, I decided it was time to try to make my own surface, since my needs are simple, my fingers are big, and I already have Push. I just need some faders and balls to send MIDI CC messages. And I'd rather not show up to a gig (or for that matter, sit down to play around at home) and discover that Live's latest update broke some script I need. Basic MIDI seems best. But I can't seem to get it working with Live. I've got a bank of 8 faders sending to daemon 0, each…

Started by JES on

1 reply

Updated

Troubleshooting

Multiple Tab Toggle with 1 Button

Hello everyone. This is my first post. I am brand new to Lemur and am hoping some of you brilliant minded people can help me with a problem. Your help is most appreciated! I am basically trying to emulate some functions of my M-Audio keyboard midi controller within a Lemur environment. I will be using it to control my DAW. This is all within the MIDI realm...I'm not using OSC for any of this. The problem is with the peculiar way my keyboard sends commands (and my DAW receives them) for the Solo,…

Started by Emerson on

5 replies

Updated

Troubleshooting

Lfo Studio - change output and clock from MIDI to OSC??

Hi guys, I am just wondering how to change the LFO studio project so that I can drive the template using a clock I will send via OSC instead of it using the hosts MIDI.....? The reason I want to do this is because I am not using a DAW and would like to have the LFO in lemur control some custom software im writing. Anyone know how or had any success with doing this? Cheers, Josh

Started by mindbuffer on

0 replies

Updated

Troubleshooting

iPad step sequencer timing and missed notes problems.

so yesterday I discovered there was a free update to v5 lemur. and that it had step sequencer functionality. I have struggled to I'm the part connect with wireless methods, so I bought the iRig MIDI. I have tested the new supplied templates with the iRig MIDI to ableton connecting the MIDI to my Allen and Heath xone 4D I loaded to a blank track in ableton a drum rack. lemur always is unreliable. timing is random, with either ableton or lemur or neither as the timing source. I thought that I'd tr…

Started by DJRickDawson on

18 replies

Updated

Troubleshooting

Scripting error with LemurEditor 5.0.3

i'm getting a little "!" error in Lemur Editor. using destroyobject(obj) please see attached screen grab. Thanks for all your good help! Screen Shot 2014-07-02 at 9.26.24 PM 1.jpg

Started by mssngmrblz on

6 replies

Updated

Troubleshooting

Daemon is forking me

Been using Lemur for a couple of years. Have an app written and has been working fine with a minimum of maintenance. Been adding midi devices and started noticing a REALLY annoying and embarassing issue. I use a Pioneer WeGO to control Traktor and I occasionally was losing the midi connection. The only way to fix it was to restart both traktor and the WeGO which is very unprofessional looking. After quite a bit of playing around and logging huge amounts of midi data I tracked it back to my Lemur…

Started by joebataz on

4 replies

Updated

Troubleshooting

scripting strings

hi there, lets say i want to display a battery percentage as Pad's label so that it will show for example :"Battery : 55 %" My problem is that i don't know how to script a string so that only one object will be needed to do so ( in this case :Pads object) I'm new to this and as far as i understand it the script should be something like: set attribute(Pads, 'labels',{ 'Battery :' , floor(battery*100) , '%'}); but i'm obviously doing smith wrong. any help appreciated

Started by Identity-Problem on

17 replies

Updated

Troubleshooting

Lemur downgrade to 4.1.2

My project no longer functions correctly. It is the Lemur interface for the midibox seq step sequencer. The only thing that has changed is that Lemur was updated automatically by accident somehow. I need to get back to 4.1.2, but since I didn't purposely update Lemur, I do not have a backup. The only thing I could find was this post: http://support.liine.net/customer/portal/questions/5906105-revert-back-to-v4-of-lemur I have contacted support@liine.com but have not heard anything back. PLEASE HE…

Started by blingy on

21 replies

Updated

Troubleshooting

Program Change from Lemur to Ableton

Hi out there, does anyone know any tricks to getting Lemur to make program or bank changes in Ableton, particularly to Papen's Predator or Sub boom Bass? I cannot seem to get it to work... Thanks for your help Randall

Started by somababa on

7 replies

Updated

Troubleshooting

Preset array of integer changes to floats on project reload

Greetings, I'm trying to use an array of 256 integers in an expression for preset storing but when the project is reloaded my stored array contains floats. Is there any way to declare/fix data type so that this conversion does not take place? The numbers are 32bit, when the float conversion happens the number is truncated so I cannot floor to get a result. I think using 16 bit numbers will solve my problem but will require some reworking of my project so is a last resort. I'm getting a feeling o…

Started by Mr Bit on

23 replies

Updated

Troubleshooting

round to even integer

a sample library rounds values to even integers, and I would like to display these values in Lemur. In C+ there are some solutions, but is this possible in Lemur?

Started by Phil999 on

4 replies

Updated

Troubleshooting

Send ctlout Pitchbend to variable target

Hi, I am trying to apply 'E0' (pitchbend) by sending a 'ctlout' to a target that is a variable, but I can´t find the way to achieve this. Seems that the only way to get it is by using the Midi Mapping of the desired object, but there I have to select the target, and my target must be a variable! so I can´t do this... Any help? thanks! P.d. I have tried also by sending the Pitchbend in another way that i found in internet: ctlout(target,100,0,channel); ctlout(target,101,0,channel); ctlout(target,…

Started by AkaMed on

5 replies

Updated

Troubleshooting

Lemur forums/support NOT RESPONDING NO HELP!!!

Days roll by without any response whatsoever to any support/help requests! Just an simple acknowledgement would suffice for most people, but this company will not even say "sorry, we are busy atom!" Just IGNORANCE! This task could even be automated but isn't - The master automation experts at Lemur are unable somehow? I have read posts from "forum admins" which are so petty in their approach, it's quite shocking! If they do ever respond to people's troubles, they are often derogatory and short. …

Started by Mia79 on

3 replies

Updated

Troubleshooting

Help with LPadV2

Hello, I am very interested in having a Launchpad for my iPad and the only one I saw was regarding to this video: https://www.youtube.com/watch?v=00CaXiLj57o It was used using this template (L'Padv2) : https://liine.net/en/community/user-library/view/383/ The project file was is here: http://www.mediafire.com/download/3y1nalqj4tagkoy/Pop+Culture+Project.rar I was able to load the template into my iPad but I do not know how to load the project file. Thank

Started by DeadlyCrzy on

0 replies

Updated

Troubleshooting

Puh, Sequencer Timing and other weirdnesses

I am doing some testing with the monosequencer. What i found is that the timing of the Mono is okish but not exactly tight in internal sync mode. Maybe the Ipad 2 is the problem but i have dropped notes or double triggers/hickups quite often. There is something going on with switching from internal to slave, sometimes i see the clock coming in but nothing happens. In slave mode timing obviously gets worse (i am using an iconnect midi2). I think it might be worth a look if there is something to b…

Started by electrofux on

1 reply

Updated

Troubleshooting

Compatible GFX card Lemur Editor

Hi, I havent been able to run the Lemur Editor on my PC (XP3 Pro SP3). It fails to launch and complains about Directx3d being unable... My GFX Card is the Matrox G550 PCIe. I take it this is incompatible?

Started by Mia79 on

2 replies

Updated

Troubleshooting

Any consensus on how to connect via iRig on a mac?

I just got the Lemur 5.0 2 days ago. After going through the ad-hoc creation and the "how-to" videos on Liine website and not getting ANY luck, I gave up and thought via iRig things would go smoothly. No luck again. Can't slave Lemur's clock to ableton sync out. It just doesn't respond. I am not using Deamon for this...Deamon never picked up anything and still doesn't. Can't see what I am doing wrong...so I am scouring the net for a concise and clear description of connection method other have b…

Started by fredericopereira on

2 replies

Updated

Troubleshooting

Resetting Logic Pro X Fader to zero

Hi there Lemur chaps. I was wondering if anyone out there has had the issue where a button mysteriously sets the volume fader to zero on which ever track is hi lighted in Logic Pro X? I have a button set to activate a screen set, but once it's pushed it immediately sets the volume fader to zero. Would some one please be kind enough to have a look at my template and see if there's something there that I've missed? I feel like I've looked through it a hundred times and can't seem to see where I'm …

Started by thejone on

4 replies

Updated

Troubleshooting

Control Change CC#123 doesnt get recognised?

Hi i have a pad with 16x8 rows on channel 12, which gives me themax of the controllable 127 CC messages on that channel. however everything is fine, except number 123 doesnt get recognised at all. Ableton Live 9 receives information like all the others but while in midi learn mode, it just doesnt detect it. thanks in advance

Started by Nastybeats on

4 replies

Updated

Troubleshooting

Lemur sending unwanted CC messages whenever I play/record

Case in point: I open a soft synth, load a preset. As soon as I press "play" or "record" in my DAW, parameters on the synth will change. I'm not sure exactly which CC numbers, but I do know that a few of them are in the 70's (CC #71, #72, #79, etc.). Weird and obviously very frustrating. Any idea what's going on? Thank you!!

Started by ishaan on

1 reply

Updated

Troubleshooting

Connects fine on OS X but not Win7

Been using the Lemur app on my MacBook for awhile and absolutely love it. A friend saw me using it and was intrigued, so we hopped on his desktop (Windows 7) and tried to set everything up. Started running into connection issues and realised we needed LoopMidi so we installed that too and still nothing. Literally everything is the same: same version of LemurDaemon, same patch, same version of Ableton Live 8 (Intro 64bit). Only difference is Windows vs OS X... Is there any other bit of info I nee…

Started by Stryker295 on

6 replies

Updated

Troubleshooting

Conditional statements with multiple pads that stay active

Hello, sorry if this question has been asked and answered before but I've really searched well for this before asking. I am trying to create a conditional statement that needs two conditions to be met before carrying out an action. This part I can do and it works fine, but this is the tricky part, the conditions need to set by the last active values of 2 sets of pads. Not their current value but the last time they were pressed (and I can't use switches either) I have my first set of pads which a…

Started by 1000errors on

8 replies

Updated

Troubleshooting

noteout length

Hi, I am building a sequencer based on a stepslider, but I don´t find the way to setup the lenght of the steps. I´m using "noteout" on it, but don´t know how to manage with the length... Any ideas? Thanks!

Started by AkaMed on

10 replies

Updated

Troubleshooting

Lemur/iPad/Ableton/LoopBe30 Midi Feedback Loop issue

Hello everybody! I'm using the ipad Lemur app with ableton 9 on a windows 8.1 computer with Live Control 2 My virtual midi is loopBe30. I have two midi ports on, 1 and 2. When I follow the instructions here https://liine.net/assets/files/lemur/LC2SetupGuideOSXWIN.pdf and here http://desertsoundstudios.com/2013/lemur-setup I get the Lemur to work well with Ableton Live! I press a button and the button in Ableton is pressed. However, after about 5 seconds of button pressing, LoopBe30 tells me that…

Started by appleslice on

1 reply

Updated

Troubleshooting

Using StingConcatenation to set a specific array item

Can i make the below code work somehow: Pattern1-8 are expressions in the Container electropolis. The script resides on any of 8 Faders and when i use one of the faders i want to write its x value at the corresponding position in the currently selected Patterns array. decl pat='Pattern'+(firstof(electropolis.Pattern.x)+1); decl pattern=getexpression(electropolis,pat); pattern[1]=x; setexpression(electropolis,'pat',pattern); Thought i first define the name of the expression, then get the expressi…

Started by electrofux on

1 reply

Updated

Troubleshooting

Abelton Live clip launching

I'm having an issue and I'm hoping someone can point me in the correct direction or explain what the heck is going on. I'm trying to create a simple 6 pad clip launcher for Abelton live 9. Nothing fancy, essentially just 6 buttons that when I hit a button in Lemur I want it to start a clip in Abelton live. I've tried setting this up in two different ways. One the 6 "buttons" are set up as custom buttons in Lemur, each sending an individual CC message. The other I set the 6 "buttons" as Pads in L…

Started by sivad2 on

3 replies

Updated

Troubleshooting

Linking or double messaging from a fader

I'm just not understanding something. I've looked and lifted from the linked objects tutorials. Read the manual. Over and over the appropriate sections... Learned alot, but im not quite understanding how to write the values and triggers correctly- I guess. it's sure not working I've tried a bunch of things and I'm stumped on this. please help. In the container. I've got 2 faders that control some channels in my RME totalmix. I want them to move as a stereo pair with only x and z checked Level an…

Started by sleeper on

12 replies

Updated

Troubleshooting

send OSC-Message of all Objects remotely

Hello As the title says, is it somehow possible to let all the objects sending their state as OSC-Message? I want to do this, so the controlled devices have the same state as the lemur. Any help is greatly appreciated Michael

Started by misal on

0 replies

Updated

Troubleshooting

Retrieving Y values from Breakpoint at X value

Hi ! Been tearing my hair out all day on this. I am trying to 'scan' though a breakpoint periodically and report the y value at point x. I have managed to generate basically a sawtooth LFO using the time variable, so values going from 0. to 1. over and over in time, and want to retrieve the y value at x(sawtooth). When I just parse out all the breakpoint data in Max/MSP, I can feed it to "function" object (breakpoint box) which allows me to feed it x values and receive the y value in return, so …

Started by Harromelt on

3 replies

Updated

Troubleshooting

getting started - object size

There seem to be not too many projects for iPhone and even less for iPhone 5. I've tried resizing, but for some reason I can't get the controls to shrink down to iphone size even though the containers do. Is there some way to quickly convert for example the TX816 editor patch to work on iPHone 5? and any way to reduce the various objects beyond what seems way to big for the phone? Should be able to make them as small as you want... - Joel

Started by joelbrave on

2 replies

Updated

Troubleshooting

MS20 - Kenton Pro Solo - Lemur os5 sequ.

Hi, i am starting to setting up the new sequencer... i saw that video https://www.youtube.com/watch?v=q3yqX5Qn5NM and i was wondering how to wire a ms20 with a cv converter like the lemur to controll octave, lengh and pitch as well. for my understanding i can controll pitch and gate thats pretty much it... i never managed a propper sync over the kenton pro one.. i prob. get another CV converter but i am not really willing to spend 1100 euros on a old korg sequencer... anyone managed that or any …

Started by Christophergroove on

0 replies

Updated

Troubleshooting

canvas_fillText - maxWidth

Hi, I own 2 iPads: one iPad2 and one iPadMiniRetina. On the mini the maxWidth variable is ignored when calling canvas_fillText. When I run the same project on the iPad2 everything is fine. My iPhone is also ignoring maxWidth. Does anyone have the same problem? Or any ideas? Is it the retina display? Or the smaller screen? Thx for your answer(s)

Started by timmm on

2 replies

Updated

Troubleshooting

Finale Shortcuts Template

Hi guys, I've been using lemur for quite a while now, and I have finally time to create a shortcuts template for finale, but for some reason the software doesn't seem to receive them. If I open a text file, short cuts like copy and past work perfectly, even simple keyout scripts, but nothing in finale. Any idea? Thanks, Joe Kataldo

Started by Joe Kataldo on

4 replies

Updated

Troubleshooting