General
Get help, share ideas, and discuss all things Lemur
Sign in or create an account to join the conversation.
Topics
knob alias graphic issue...
Hi, I've tried search in the forum but I didn't find anything relating this...when I create an alias for a knob its values are not refreshed when changed (new values are drew over the older ones). The picture should make the problem clear. I've done some tests and this seems to happen only with knobs aliases (and not, for example, with fader aliases). Has this happened to anyone? knob alias.png
0 replies
TroubleshootingTrouble showing and hiding a container
Hello, just wondering if anyone out there can help me with scripting this button. I want a pad button to execute an action and open a container at the same time. I have this working but when you let go of the pad button the container disappears. I need help getting the container to only disappear when I press the pad button again. Live Config Buttons.jzml Any help much appreciated!
1 reply
Troubleshootingis there a SYSEX size limit ?
Hello, before I continue coding a million sysex code lines for my Yamaha A5000... Is there a SYSEX SIZE LIMIT ? a Buffer limit ? A5000 easily dumps data larger than 256 bytes on most operations. I found that MIDI_ARGS shows note or CC incoming values with no problem, but many SYSEX are stuck again and again.. Thank you, Juan Manuel Aguirre
2 replies
Troubleshooting[SOLVED] Problem Receiving MIDI INPUT
Hello, I'm using Lemur on Ipad4, with IconnectMIDI2+. (ICM2 has no port filter set, everything is open). I can't make LEMUR to receive midi data. Using MIDI WRENCH, i see that data reaches the IPAD just fine. MIDI I/O is properly set as MIDI 0 on the setup options. I can SEND midi and sysex with no problems I made a script Monitor.value=MIDI_ARGS with OnNote OnCC or OnSysex, with no results. Could you help me ? Thank you Juan Manuel Aguirre
2 replies
Troubleshootingfader scales not equal in lemur and cubase
Hi, I just noticed that that fader scale in cubase 7.0 (max 6db) does not correspond to the maximum fader scale in Lemur (which is 1). It corresponds to 0.93. Am i missing something here? antoine
7 replies
TroubleshootingToo many arguments in {}-brackets
Hey all, I have an if-clause to turn off about 60 buttons with one single button. However, I cannot add all the buttons that need to be turned off. The script font turns red and the editor doesn't accept any characters anymore. Does anyone have an idea how to workaround this? I already tried a for-loop with an array: https://forum.liine.net/viewtopic.php?f=34&t=3125 But this one also uses {}-brackets and fails when adding more conditions. Creating a second script inside the button doesn't work e…
6 replies
TroubleshootingRadio button array CUE
Hi I'm working on a project and I'd need to have an array of switches working as RADIO to switch on the CUE of various mixer channel strips in Ableton Live. I tried but it doesn't work, because it switch on ... but when I select another button of the array .. the previous one doesn't turn off. can someone help me ? Thank you :)
1 reply
TroubleshootingNeed Help to change Roboknobs to OSC
Hello, just want to say I completely suck at scripting! I've been working on a template for a long time because I suck at it! I have ideas how I want my template to work. I tried to incorporate as much of the badass stuff in the user library into my template as I could. I really would like to incorporate Roboknobs from the user library into my template but using OSC instead of MIDI. Thanks to the scripter for scripting such great knobs that can record your movements! Very awesome! Unfortunately …
1 reply
TroubleshootingKbMouse gets removed on each startup
Hey guys, I've been having this issue for a while now... Everytime I launch the computer, the Lemur Daemon doesn't "remember" the KbOut Mouse port and I need to add manually. It keeps the other ports but not the Mouse one. Any ideas? Thank in you advance. P.S: I don't know if it's in a any way connected but I've created a Macro to launch Lemur Daemon upon Windows startup because the native "Launch Daemon at startup" gives me an error with DirectX for reason (I think is a well-known bug, right?)
3 replies
TroubleshootingVariable in custom OSC Adress
Maybe someone here in this Forum has an idea how to solve my problem. Try to Programm some Remote for a lighting Desk an get stuck at one Point: I have a Button with a custom OSC Adress: "/user/21/key/1" (it just press the key "1" as user 21. now i want to Change the user an need to get a Variable in the Adress. I thought it would work with something like this: /user/y/key/1 and define y as the user I need. But this does not work. is it possible put a variable in this Adress? If it is Possible h…
0 replies
Troubleshooting'Edit' function on Lemur Android doing nothing !
hi, i want to delete some projects on lemur Android, so i can't because the 'Edit' function doing nothing on my lemur (samsung Tab A or Motorola X style same pb). is someone found this working or is only me ? https://framapic.org/M1uhrlkMQg5R/xCv7EEtwu2CN.jpg
0 replies
TroubleshootingAbleton to Lemur record enable/overwrite
Hi there, hoping someone can help. I'm trying to make a simple Lemur interface to control certain aspects of Ableton Live. By enabling remote output for the Daemon MIDI device within Live, when I move a slider or push a button in Live which has a MIDI mapping from the Lemur interface, the Lemur interface updates to show the current state of the slider/button... aka bi-directional communication, which is great. However, this does not seem to apply to record enable for Live's tracks, or record ove…
0 replies
TroubleshootingOSC Messages
Hi, I'm trying to send some OSC messages to a MOTU audio interface and need them to be integer based instead of float. Does anyone know how to do this? I got what I want to work using the program Vezér and in it's track preferences you can change the message from Float to Integer and that's when the MOTU started responding, so I'm hoping Lemur can do the same. Thanks!
1 reply
Troubleshootingmultipad with blinking last pressed button?? [solved]
OK, I'm just obsessed, and feeling dumb. Super thankful to Antonio for the script on the blinking singular pad- But now I'm hoping to do the same thing to a pad that has 1 column and say 4 rows where the last pressed is the one that is "blinking" expressions declared- flash=0 flashMaxLight=.75 lastTime=0 router=0 my flash script became- (flashprocess) on frame- if (!router) return; flash = sin(time*4)*+.3+.3; // which gives more of a sine wave ramp up and down light brightness then a blink the s…
4 replies
TroubleshootingDifficulty connecting iPad to macbook
Hi folks, I am trying to connect my ipad to my macbook to send and receive OSC. I'm using OS 10.10.5 (Yosemite). I created an ad hoc network and my ipad sees it in "devices" not under the "choose a network" section like I see in the videos. When I connect to the device, I get a warning saying the network is not connected to the internet and do I want to proceed. I click yes. There is no airport symbol at the top left like I see in the videos, but I did see this article: http://support.liine.net/…
0 replies
TroubleshootingUnusable Latency w/ onMIDI Scripts
Setup: iRig MIDI, 30 pin iPhone 4 or iPad2, same result Could any of you folks tell me what is the very quickest way to pass a DIN MIDI message straight through the Lemur app and back out the h/w DIN MIDI output of a physically connected iOS MIDI Interface(i.e. iRigMIDI)? Please have a look at this basic template, nn_LatencyTest.jzml w/ two onMIDI scripts, passing NoteOn/Off from MIDI1 In(iRig) to MIDI1 Out (iRig) out. The latency is unusable. Listen to these audio files. They were created with …
4 replies
TroubleshootingProblem with Lemur & Cubase generic remote Punch in Buttons
Hi, still getting to graps with Lemur, but have a nice tracking transport for Cubase pro 9's generic remote, everything I want is working as expected except for some of the switches - Punch In/Punch out and Snap On/Off I have "activate punch in" on a switch and when I press it, the activate punch in on Cubase lights up, so all good. however when I then deactivate the switch on lemur, the button in Cubase doesn't deactivate... if I press the button again in lemur, then it deactivates in Cubase, b…
9 replies
Troubleshootingresize canvas
I have problem resizing canvas, the position changes when using the function setobjectrect() but not the width and height. I have to put the function in an "on Frame" function to get the result I want. FYI my canvas refresh mode is "on demand" Best,
0 replies
Troubleshootingscripting a pad with a blinking "on" state [SOLVED]
Hey Guys, I'm trying to script a pad to be blinking on and off while "on" and switching to a darker colour when off. I created an expression for the blink which works great if I plug it into the "light=" properties- blink=sin(time*3)/3+.1+.1 I can use the script below to toggle a pad's light bright and dark - on expression x rising- if (!light) light=.8; else light = 0; ... but the pad is either lit up when on or dark when off. I'm looking for a flashing "on" signal kinda thing. I specifically n…
4 replies
TroubleshootingTraktor won't register Midi imput
Hi all, I'm fairly new to the whole thing (Traktor is my first software of its kind and it's the first time i'm setting up a Midi connection. I've managed to make traktor detect imput (ctrl button lighting up) via the Daemon and LoopMidi (and ofc by creating the midi controller in Traktor's controller manager), but whatever project I use it doesn't actually make any difference in the Traktor software (aside from that CTRL button lighting up). I can't actually do anything, despite the input value…
0 replies
Troubleshooting20% CPU Usage on A7 w/ Blank Template????????
OK, starting to get desperate. My iPads have been ENORMOUSLY unstable when running various music-related apps in background mode. In an effort to get to the bottom of this, I've done something I should have done a long time ago. Running the unix 'top' command (think windows process monitor, or mac activity monitor) in a terminal on a jailbroken iPad Mini2 on iOS 9.3.3 With NO OTHER APPS LOADED, and with a NEW, EMPTY TEMPLATE, DOING NOTHING, Lemur is using 20% of a 1.3gHz A7 ????? ARE YOU KIDDING…
2 replies
TroubleshootingHelp With Text Display
Hi Everyone, So I made a fader that as it moves changes the text of a text object. However when I get above 64 different texts it gets weird and doesn’t display properly. Can you check that I wrote out my code right? I’m worried that the rounding thing is wrong. I’m hoping to have the ability to get 128 different phrases. Here is my code: FYI my co-worker has a sense of humor and put someones name as the variable so that’s what the tyler is there for. decl text,tyler; tyler = round(x*128); if (t…
0 replies
TroubleshootingCannot change the 'name' attribute on fader ...
And here comes another one I cannot figure out: I just tried to change the actual name of a Fader object upon receiving sysex. I set up a Fader with a script. When I script ... decl FaderName=Fader; setattribute(FaderName,'unit',arraytostring(subarray(MIDI_ARGS,Start2,Start3-Start2-1))); .. the display in "unit" is exactly what I sent via Sysex. Start2 and Start3 are variables I defined before by searching the correct places in the Sysex with a while loop. But this works! But when I script ... d…
1 reply
TroubleshootingWhy does this conditional operation not work?
I have a Fader object and its midi input and output are disabled. Then I create a script "On Expression, Fade.x" to get feedback to the fader from a hardware midi controller sending pitchbend: midiout(1,{224,1,Fader.x*127}); This works! Then I create a script"On Midi, Pitchbend, Channel 1" to output midi pitchbend: setexpression(Fader,'x',MIDI_ARGS[0]/16000); Ok, now I get midi output from the Fader in Lemur. However, I also get doubled midi output from feedback sent to the fader, which is not h…
3 replies
TroubleshootingString to array
Hello I remember I found the solution time ago, but as the user manual is not updated :( I can't find how to convert a string to an array... I.e.: I have an string containing a number '2500' and I want to convert it to an integer.... Where's the stringtoarray function? .....because sizeof(string) gives me 1.
0 replies
TroubleshootingMonitor Name Bug
This will take 5 minutes for you to verify. Please help. I stumbled across this gem while trying to troubleshoot another bug related to the default switch initialization when a template is loaded. That bug first: 1. Load the template in the editor 2. Connect to Lemur 3. Monitor1 shows that firstof(x) is 0, (rather than the monitor default of 120.350) indicating that somehow, this switch has been 'activated', since the script is triggered on Switch1.x 'up' I placed a ctlout() in that script and i…
6 replies
TroubleshootingAlright, this is REALLY screwed up...
Sorry for the subject, but try this and see if you don't agree, Overview: a script which randomizes a monitor's value, attached to a pad's OnExpression x Up Trigger Mode. Tha Pad is named Pad: Monitor.value = rand(); Another script, attached to a second pad's OnExpression x Up Trigger Mode, which sets the first pad's x expression to 1, then back to 0. The pad is named OnOffBtn: Pad.x = 1; Pad.x = 0; Pressing Pad works as expected. Pressing OnOfBtn does nothing. WHY?????? So, further investigatio…
2 replies
TroubleshootingScripts receiving MIDI CCs -- wtf?
I know I sound like a broken record -- "Lemur is not properly documented and it causes us to waste a lot of time" Goal - have some controls in a template respond to MIDI CCs Restrictions - only receive, not send; only respond if the MIDI target and channel match Since I can't see a way to use the built-in controls for an object to receive only, I created an ON MIDI script to receive incoming Control Change messages on MIDI channels 1-16. I created 8 of these small scripts, one for each MIDI Targ…
2 replies
TroubleshootingCustomButton state not reflected to Editor (Synchro on)
Hi, I'll try as possible to explain my problem. - Lemur iOS v5.3.2 on iPad 3 (iOS v9.3.5), restarted first to be sure. - PC Windows 7 Pro SP1 x64, running loopMIDI v1.0.13 (24), Lemur Daemon & Editor v5.3.2. - 70 Mbits/s 802.11n WiFi connection (access point - same latency when using "ad hoc" WiFi and having additional troubles). 1/ My iPad 3 is connected to PC via WiFi (latency = 27 ms). PC and iPad in same private IPv4 network (192.168.1.0/24) 2/ Firewall is disabled :shock: during all tests m…
2 replies
Troubleshootinginternal Clock seperation of objects
So, Im trying to have two sets of a StepNote, StepSlider and StepSwitch run on two clocks - one set to clock0 and one set to clock1. A bag of bugs has been opened. Here's the testing example: clocks-wtf.jzml
6 replies
TroubleshootingPC only has ethernet not wifi
Hi, Is it possible to connect my Windows Surface PRO 3 using Lemur to my DESKTOP PC... I have wifi on my windows tablet and my DESKTOP only has ethernet.... They both can connect the same router and access internet.. I don't care about latency I just want to connect Lemur through my router yet I have no clue how this can be done or if it can be done at all... any help?
3 replies
Troubleshooting2 iPads using Lemur, instances names conflict.
Lemur instances names are hardcoded inside app on ipads (as "Lemur") . The problem is that identical names are recognised by Reaktor when using more than one iPad, randomly switching wrong ip addresses/ports to devices when loading projects/ensembles. Is there a way to use 2 ipads with Lemur without names conflicts? Thanks for your help.
3 replies
TroubleshootingNeed help with scripting Reaper SWS Actions?
Hello, Ok, so I figured out how to map a Reaper SWS action from an OSC button! Great! Totally stoked about that! But, I can't get it fully functioning. It sends the SWS action twice, no matter what I try. So, I'm using this action to trigger the SWS action: if(x==1){oscout(0,'/action/str','_S&M_MIDI_INPUT_CH1')}; Problem is, its sending it twice. So Reaper is performing the action twice. How can I make it send this action only once? I've tried changing expression to only on the up arrow. I've tr…
0 replies
TroubleshootingIS THERE A MOUSE RIGHT-CLICK? Mouse Problems!
Hello everyone, I have two questions? One: Is there a mouse right click? I've searched the forum, this has been asked. But, I couldn't find an answer? Anyone, is there a mouse right click and how do you script it please? Two: I do have a mouse problem too. So, I commandeered this mouse from the user library. Thanks to the creator. And I'm having a small problem. The resolution or size of the mouse pad. Basically I can only mouse to close to the bottom of my pc screen. It won't mouse like the bot…
0 replies
TroubleshootingLogic Surround Pan?
Hello, I've been struggling with Lemur's Logic Surround Pan module, as I've gotten some hard time trying to make the parameters and values meet in a correct way: So far everything's okay, but there's a 180° difference between my finger position and Logic's surround position. Both the distance and the final angle seem to be working, but putting my finger onto (iPad) Lemur's upper right corner puts Logic's pan position into lower left corner. Moving my finger clockwise moves the Logic's position c…
10 replies
Troubleshootingconvert XY data to azimuth and radius
Hi, I am working on a surround project I want to use lemur to control a panning device in ableton live. see image below. http://i1179.photobucket.com/albums/x400/Dan_Monahan/M4L%20panner.png From what I can see I need to somehow convert the XY data sent from a lemur device to control the azimuth and radius parameters of the max 4 live plugin. I would like to use the 'ring area' object in the same way AB has done with 'AB-vEkTeR3' template https://liine.net/en/community/user-library/view/326/ I r…
4 replies
Troubleshooting[SOLVED] Lemur doesn't load text on pad when starting
Hi every one, I can't succeed in having lemur loading text for my pads when starting. For this to work, I have to load the lemur editor on my PC, load my template, start synchro (with play/stop button) and connect to my tablet. Then I have to click actualisation button to finaly have my text loaded on my tablet. I can see the blocks (pad / switch), but no text appears on them. I join 2 files and my jzml to a better understanding. onstart.PNG reaper-scoring04.jzml with-text.PNG
8 replies
TroubleshootingHow reset the on/off state of a switch with another switch?
Hello everyone! I was wondering if anyone out there knows a way to reset, or change the on/off state of a switch with another switch. I have two examples. Example 1: Container Example.jzml This example I have some buttons controlling the view of some containers. My goal is to open one container and it makes the other containers disappear. I have that working. But, when you go to open that same container again you have to double push the button. Like when you open container A, then open container…
7 replies
TroubleshootingNeed Help to Make Endless Rotary Knob Send Only OSC 1 or 0
Hello everyone! I need help making an endless rotary knob send only OSC 1 for clockwise and OSC 0 for counterclockwise. I'm trying to get an endless rotary knob to work in Reaper for zoom, scrub, etc. I can get it working in other competitor apps, but not Lemur. So I know that Reaper is looking for only two OSC values. As is, Lemur sends endless numbers growing incrementally. 0, 1, 2, 3, 4, etc for clockwise and 0,-1, -2, -3, -4, etc for counterclockwise. The number grows incrementally each dire…
9 replies
TroubleshootingNeed Help to Save and Load Presets of Multiple Objects
Ok, so I'm trying to build a drum sequencer and be able to store and load presets in a set of pads. I've started with the example given with the Lemur editor where there are two sets of 16 pads, one named store and the other named load. And the pads store and load presets of a multislider. I am using the same example but I want it to control several different stepswitches. So I can store and load presets of the stepswitches. So there are stepswitches named kick, snare, ride, etc. The stepswitche…
40 replies
Troubleshootingchange position objects via MIDI / OSC ?
Hi everyone, It is possible to control or change the XY position of the objects via MIDI or OSC? greetings from berlin, Kandy
7 replies
TroubleshootingHow to receiveg huge OSC arrays
Hello I am trying to receive a packet from Ableton Live. It contains all the clip names, so I can be easily 1024 indexes. I can't put OSC_ARGS in a vector, because the if the full message was received, it would be 1024, and it is more than the 256 indexes Lemur limit. So I have to call oscout several times to get all the clips on each track, so each track would be a vector that contains all the clip names of the track. The problem is that I am not able to pause the script between tracks, so that…
1 reply
TroubleshootingMore than 10 text objects not responding
I'm working on a Lemur layout with 20 track faders, names, and numbers. I can't get Reaper and Lemur to sync the track bank with more than 10 tracks. In my ReaperOSC file I have DEVICE_TRACK_COUNT 20 TRACK_NAME s/mixer/trname@/content TRACK_NUMBER s/mixer/trnumber@/content TRACK_VOLUME n/mixer/Fader@/x In Lemur I have: 20 faders named Fader1, Fader2,... Fader20 20 Text objects named trname1, trname2,... trname20 20 Text objects named trnumber1, trnumber2,... trnumber20 All in a container named "…
1 reply
TroubleshootingOSC - why are monitor values shown in 'quotes'?
This is surely a noob question, but, well...I'm a bit of a noob I've noticed that all my monitor values are shown with single quote symbols (i.e., '-0.5 dB', 'FX Param 1', etc.). Obviously, I'd like to remove these. Anybody know why they're there? For a bit of background...I'm designing a master control surface for Reaper. It's coming together in bits and pieces :-) but when it's done, I can't wait to share it!
1 reply
TroubleshootingText Display
Hi, so I work in Cubase and I figured out a way to have Lemur display all my expression maps. I set the midi fader value in cubase to anything between 0 and 127. Then based on that value a fader moves in Lemur which activates specific text. It's all very fast and looks great. Here's the problem. I'm new to Lemur and I ran out of allowed characters in the script text field. I know there has to be a better way to do this. Can someone help? I don't know very much about scripting so please treat me …
1 reply
Troubleshootingconstantly losing Lemur Daemon connection
Hey guys, first of all I have been checking the forum to find similar results, but nothing which helped so far. Just in case I missed something which could help, hit me! :) The thing is, I recently bought a Samsung View which is an absolutely awesome controller for Lemur since it is so big :D However, the problem is, that it worked really great in the beginning but after some time Lemur Daemon started losing connection every 2-3 minutes. I tried all kinds of things, but I can't figure out what t…
1 reply
TroubleshootingCan't launch editor
Hi, Setup : macbookpro 2009, running 10.11.6. Lemur editor 5.3.2 The editor used to work fine on my mac until yesterday: it now never completes launching, i.e. all menus do not show (see attached screenshot), and no GUI ever shows up. I tried reinstalling, and even downgrading to 5.2.2, but I'm still getting the problem. I also tried launching from terminal, it seems the app is stuck trying to establish a connection on port 9000: 2016-11-14 07:50:22.277 Lemur Editor[1091:38989] Attempt connectio…
0 replies
TroubleshootingNew User Menu scripting woes
Hello All, I'm a new user and struggling with the Menu item. I have downloaded and looked at quite a few projects searching for an example. Have also read thru the pertinent parts of the manual. My question is... I have a simple menu with 2 items. I want to send a different OSC command on selection of each one of those 2 choices. Thanks, nbdy
6 replies
TroubleshootingSwitch needs to behave like pad
Hi, Off course a newbie with a question :-) I try to build a control for Visibility in Cubase 8. With Cubase 8's Program Logical Editor I can create 'scripts' to show/hide specific 'name tagged' tracks. Via a Generic Control I can fire off these scripts which 'toggles' track visibility per audio/midi/sound). To have visual feedback I like the switch array. But in CUbase the PLE script only accepts Push (Pad) signals. So to toggle a visibility group I have to push twice. When I use a Pad button t…
1 reply
TroubleshootingProblem receiving Array Data from Reaktor.
I am trying to send and receive a switch with radio to a Reaktor ensemble using OSC. Reaktor working fine to receive data using Address Pattern and then assigning an Index number for the Array: Address Pattern: /Switches/x Index:0 Address Pattern: /Switches/x Index:1 Address Pattern: /Switches/x Index:2 etc... But the problem is for sending back the array values to Lemur, there's no Index tab for sending, and all messages are returned from Index 0. Help is welcome.
2 replies
Troubleshooting