Project
Push for lemur
Started by wul on .
Sign in or create an account to join the conversation.
Is it possible that someone uploades the fixed Template.
Thx
Thx
The instruction for the fix are explained on the previous page it's best that users mod it themselves for the reasons described, it's easy
Hi.wul wrote:It's the same problem as reported in the above posts , here is what's happening....
There is a midi feedback loop from the top scene button and the label instruction which for some reason in version 5 is sending the cc 43 value out and live feeds it back only for the label instruction to send it back out again, it certainly didn't do it on version 4 so due to the oversight on my part in leaving midi0 selected in the label mapping pane . It does not sound as though everybody is encountering the problem. I wondered if the issue would go away in the latest lemur update.
Clearly it ain't.
Here's what to do.. expand each scene button highlight the label instruction , then deselect midi0 in the target field for each of the scene buttons . That will do it.
I have tried to simulate the issue in a basic template but I am unable to, so I've no idea as to why it's started doing it all of a sudden.
I've picked up lemur pretty much so I can use shove and unfortunately I have this problem as we'll. trying to use a drum rack and sequence a pattern results in ableton locking up. I've tried to edit the template according to the post above, but I'm not sure if I'm doing it correctly. I've tried deselecting midi0 on the top row of buttons and also the column to the right (which the push manual describes as the scene launch), when you say scene button do you mean the main grid?
Can anyone describe this in a way a lemur noob would understand it, or maybe a small child
thanks in advanceThe scene buttons are the 8 buttons down the right hand side that double up as the note repeat quantize buttons 4,8,16 etc.
Thanks Wul, I've got it working. Amazing work you've done here!
For anyone else struggling with this, press each button and in the midi mapping section there is a pulldown menu (it has 'x' next to a red dot by default), select 'label' from the pulldown and change target to none instead of midi0.
For anyone else struggling with this, press each button and in the midi mapping section there is a pulldown menu (it has 'x' next to a red dot by default), select 'label' from the pulldown and change target to none instead of midi0.
Hello Liine community!
I have the strange problem that Shove suddenly stops working after about 10 seconds.
Only midi notes are still sent out.
When i temporary select "none" control surface and then reselect push, it starts working again for just 10 seconds!?
Did anybody experienced the same or knows what the could be the reason?
I am using Live 9.0.2, ClyphX 2.3.6, Shove 1.1 and the orginal Live Push folder.
Thank you very much for your help!
I have the strange problem that Shove suddenly stops working after about 10 seconds.
Only midi notes are still sent out.
When i temporary select "none" control surface and then reselect push, it starts working again for just 10 seconds!?
Did anybody experienced the same or knows what the could be the reason?
I am using Live 9.0.2, ClyphX 2.3.6, Shove 1.1 and the orginal Live Push folder.
Thank you very much for your help!
I'm guessing you have not got the clyphx working right because that's what happens when clyphx isn't used , there is a 10 sec timer in the push handshake script for the handshake to take place with the hardware so for 10 secs shove works .
Clyphx bypasses this somehow by adding a line in its script , see earlier posts for details , there is of course the other method. Again see earlier posts for details
Clyphx bypasses this somehow by adding a line in its script , see earlier posts for details , there is of course the other method. Again see earlier posts for details
Ya...I don't think this works anymore with the latest version of Ableton 9.1.4 and Lemur, even after editing each scene to midi zero. Still get crazy midi feedback, and sequencer never works properly, anymore.. This worked fine about 6 months ago. Now Lemur is a junk app on this ipad that I was excited about briefly. It was cool when it worked. *Side note, nothing to do with Shove, but the midi connect is tedious compared to other Ipad Midi music apps like Tb Midi Stuff.
Read the posts on page 18 of this thread , it will instruct you on how to modify shove to cure the midi feedback issues
I've been spending hours on this. I purchased the Lemur app especially because of Shove and the L'Pad app but both don't seem to work. Can someone confirm these projects both work with the latest version of Live 9? The Push app doesn't even load correctly. Some buttons don't work or even switch. Like the L'Pad app, the session button doesn't do anything. It's like its frozen. In midi preferences in live, I had to go in out and just try and turn things on and off just to get the Push showing lights. Anybody please help? If both of these templates need to be updated, can someone, anyone please upload? 
Yeah ... il will be so nice if someone would be so kind to share infos and the updated template cause not so easy to understand how to "tweak" the template , what version of Ableton Live etc..
Thanks a lot
Thanks a lot
I am reliably informed that they are working on the latest versions , and yes the tweak is easy , also check your daemon connections are correct. All the info to get it going is in this thread .
I think these are different but similar issues.
Even after editing the scene from the instructions provided here (p.18), it does not fix the issue I am currently seeing, certain buttons will cause feedback
When I attempt to use the Melodic Sequencer by hitting "Notes" the screen no longer loads an 8x8 array. It appears to be a 6x8 array with two columns of yellow. Ableton starts going into Midi Feedback. If you'd like I can provide some pictures.
I am configuring Push as input 1, with Track and Remote
And Push as output 2 with Track and Remote.
I wish I could just go back to the previous Lemur version with Shove, I was content with that.
Even after editing the scene from the instructions provided here (p.18), it does not fix the issue I am currently seeing, certain buttons will cause feedback
When I attempt to use the Melodic Sequencer by hitting "Notes" the screen no longer loads an 8x8 array. It appears to be a 6x8 array with two columns of yellow. Ableton starts going into Midi Feedback. If you'd like I can provide some pictures.
I am configuring Push as input 1, with Track and Remote
And Push as output 2 with Track and Remote.
I wish I could just go back to the previous Lemur version with Shove, I was content with that.
I just tried it with the latest lemur version but an old live demo and it works ok , I don't have remote selected on the ins and outs , I also don't use the clyphx method. So your problems could either be
1 the clyphx method don't work anymore
2 the latest version of live, although I am informed it works ok
3 the mods
Can someone confirm if it's working on the latest version of live
1 the clyphx method don't work anymore
2 the latest version of live, although I am informed it works ok
3 the mods
Can someone confirm if it's working on the latest version of live
I have it working with latest 64bit Live, ClyphX method and all the mods documented here (plus a couple of my own). All appears to be working much as it did before I updated.
Hey Wul, how about a Lemur version of the Komplete Kontrol S-Series? Only kidding
Hey Wul, how about a Lemur version of the Komplete Kontrol S-Series? Only kidding
Whilst emulating the Ni stuff would be good ,I suspect the komplete kontrol stuff communicates the same as maschine via some usb protocol . So I gave up trying and bought maschine , I then tried to look at the usb traffic , it was at that point I gave up. So glad your kidding.
@KPMC
Could you kindly post a screenshot of your Track Remote settings in Ableton 9.1.5?
I know you say "All Appears Working" but can you check the Melodic Sequencer, by hitting "notes" which loads another array. Then attempt to use that doing a loop?
Please kindly let me know your results?
Could you kindly post a screenshot of your Track Remote settings in Ableton 9.1.5?
I know you say "All Appears Working" but can you check the Melodic Sequencer, by hitting "notes" which loads another array. Then attempt to use that doing a loop?
Please kindly let me know your results?
Which buttons are you getting feedback on?
There is an image of my settings on page 9 of this thread - https://forum.liine.net/download/file.php?id=1035
Melodic Sequencer is working properly, as is the Drum Sequencer and the Sonic Faction M4L Push effects that stopped working for a while.
Melodic Sequencer is working properly, as is the Drum Sequencer and the Sonic Faction M4L Push effects that stopped working for a while.
Hy guys,
Could someone please clear things a little...
D
This is getting weird , why just dont upload a working template, im a musican,not a programmer..
Or,just explain step by step
-which changes in the lemur file ?
-which changes in the ableton content folder?
-lemur deamon or adhoc networksession or WHAT ??
Osx 10.9
Live 9.1.4
Lemur 5 ipad air
Could someone please clear things a little...
D
This is getting weird , why just dont upload a working template, im a musican,not a programmer..
Or,just explain step by step
-which changes in the lemur file ?
-which changes in the ableton content folder?
-lemur deamon or adhoc networksession or WHAT ??
Osx 10.9
Live 9.1.4
Lemur 5 ipad air