General
Get help, share ideas, and discuss all things Lemur
Sign in or create an account to join the conversation.
Topics
Receiving patch change info
Hi, I am trying to create a Nord Lead 2X Template - I am using the MIDI Wrench app to work out the MIDI parameters. And I have created some controls which now work nicely between the iPad and the Nord. I am using the iPad editor as I just find the Lemur Editor on the Mac too hard. What I need help with is when a patch changes I would like the NORD to automatically change all the parameters on the layout. Do I need to send out a script for this change to happen? That is too advanced for me at thi…
1 reply
TroubleshootingEasy math issue for newbie
Just want to have a number count down by minutes. Say 90 appears in a field and subtracts 1 from it every minute. Thanks for any help.
1 reply
TroubleshootingScripting NoteOff to Logic X **Please Help!!**
No matter whether I use note out with vel=0 or midiout with note off message I can't get it to work! I really like this simple keyboard because it has 3 ergonomic octaves: I've created a pads object and scripted the scale with a vector so I don't have to create each key separately for a typical midi keyboard... everything works great for note on, velocity etc... but when I release I get a hung note of pitch "0" instead of a note off. With logic X will it not recognize note out with v=0 as a note…
3 replies
TroubleshootingOn-State Multicolor
Hi, wondering if it a way to have a switch object say with 4 switches, and have multicolor assigned to them, but to ON state? see image, I want switches to be in Radio Mode, and all to be grey colored, so when I select any one of them, they should turn on with the colors defined by me. Screen shot 2013-06-09 at 1.24.57 AM.png
6 replies
TroubleshootingHelp with Menu..?
I have a list of 90+ menu choiceson a vst that I need to select from my Lemur template. I've categorized the options and have 4 separate MENU objects being controlled by the same Control Change Message. I've scaled the values and am able to select all of them except for the first option in menu 2, 3 and 4. These, I can't seem to select unless I tap on another option in the same menu first. I've attached screenshots of an example template so you can visualize the issue I'm having. Options B1, C1 …
2 replies
TroubleshootingPlease help, I'm stumbling on this simple thing
I'm trying to use a Multipad object and have a unique message sent per pad.I just want to have a simple script like this- on expression x (rising) if Pads.x[0]==1 noteout(0,24,127,1); if Pads.x[1]==1 ctlout(0,1,120,1); if Pads.x[2]==1 oscout(0,'pads','x'); if Pads.x[3]==1 noteout(0,25,120,1); Where each pad can send out a unique message that I specify. I know this should be stupid simple, but I'm missing something. This is for a 4x4 multipad object, 2 rows, 2 columns. thanks for any help in adva…
2 replies
TroubleshootingEasy math issue for newbie
Just want to have a number count down by minutes. Say 90 appears in a field and subtracts 1 from it every minute. Thanks for any help.
3 replies
Troubleshootinga simple system clock "widget"
Hi Folks, I would like to have a simple digital clock in my interface to know what is the time :) It should use the ipad internal clock but I don't know anything about scripting and I haven't found a solution for this in the forum or in the google (only midi clock, elapsed time clock, etc.) Could somebody help me out with some thoughts? Thanks, gabonacorp
2 replies
Troubleshooting[Solved] - GUI Issue on editor and deamon W7-64
Old subject, same issue Replace the video driver with the latest one and updated directx, reinstalled lemur ... nothing seems to matter ... :cry: Even the deamon does not run at startup ... LemurGUI.png LemurGUI2.png Any solutions ?
8 replies
TroubleshootingUsing accelerometer to control a fader...
This is probably pretty simple, but I'm new to this aspect of Lemur, and after spending most of the morning trying to figure this out, it's time to ask for some help. I need to make a simple 8 pad patch for iPhone, where there is some control over the velocity sent when I play a pad. As far as I can see, the only way to do this is to assign a fader to the velocity value of the pads (that bit's working) and then control the fader value with the accelerometer (that's where I'm stuck). (I want to u…
1 reply
TroubleshootingOSC message to change interface
I've been all over the net trying to figure this one out. The basic idea is that when I select a track in Logic Pro for instrument x, Lemur changes to that instruments corresponding interface. I found this post on vi-control but I don't know anything about scripting so I couldn't figure it out. I've copied the relevant section of the post below. " This is slightly advanced stuff,so be patient.below is a basic script for lemur that accepts incoming osc message and selects an interface(page in tou…
1 reply
TroubleshootingWeird Lemur Activity - Video Footage
Hi Everyone, I've been having this trouble with Lemur Editor and Lemur Daemon in which it comes out looking like this. I did NOT change my monitor resolution, so I don;t even know where to begin to try to fix this. As of right now, I am completely locked out of my touchscreen. https://www.youtube.com/watch?v=XYow1I8ydMk Does anyone know what might be causing this or how to fix it? THanks, Chris
0 replies
TroubleshootingRadio custombutton
hi I would like to made like the radio mode on Switches, but using several custom button… and something wrong and don't understand what and why ! when the list of x value of custombutton change from the 1st value to upper (like : {1, 0, 0, 0} / {0, 1, 0, 0} … {0, 0, 0, 1} --> i can call it forward ) it's working but when going backward, like : {0, 0, 0, 1} / {0, 0, 1, 0} … {1, 0, 0, 0} something wrong ! so, you're help and feedback are welcome°°° thanks best f RadioCustom.jzml
0 replies
TroubleshootingLemur EDIT problem
Hi everybody I can start Lemur App on my android device, and load projects witch work, but EDIT button doesn't work. My device is Acer iconia One 10 B3-A20 16Go 10" screen, Android 5.1 (3.10.72), Lemur 5.3.3 Does Lemur Editor still exist ? How to install manually jzml files ?
1 reply
TroubleshootingAndroid - inter-app MIDI
Hi, I'm using Lemur 5.3.3 on Android, the update details say "Add support for hardware MIDI devices, inter-app MIDI and MIDI over USB" So considering Lemur on Android does not support USB MIDI Cables, I was hoping to use 'inter-app MIDI' and use another Android app to route the midi to the USB MIDI cable. But I can't see how 'inter-app MIDI' works, and it's not in the manual either. Any assistance much appreciated. ~W
0 replies
TroubleshootingGod this is so painful to work out
I've an iPad, and a PC (Win 8.1) I've spent most of the day trying to get the software working with any music soft. Best I've managed is to get it to send OSC to Reaktor, but ensembles aren't changing when I move anything on the Lemur. I've a wired connection, so the ad hoc stuff isn't applicable, but I have managed to get a connection with loopbe1 and some blind luck. I just want to try out these templates, if any person can step me through this complicated stuff, I'd be well happy. Thanks
1 reply
TroubleshootingI can send MIDI from Lemur --> Reaper, but not vice versa.
I cannot get bidirectional MIDI control working in my setup, and it's driving me nuts. I'm at my wit's end! In case this isn't clear: if controlling a soft-synth, moving a knob on the iPad moves corresponding knob on-screen; however, moving knob on-screen with mouse does not move corresponding knob on iPad. :'( I'm using the latest versions of everything. Windows 8.1, 64-bit, Reaper, LoopMIDI. I've got all the MIDI boxes checked in Reaper, to the best of my knowledge: Clock/SPP enabled, etc. Thi…
6 replies
TroubleshootingLemur Daemon crashes when trying to connect ...
Everything worked without a problem, now, suddenly the Daemon crashes (quits without any notice) every time, I try to connect from itself or via the tablet. I am on a mac pro (OS X 10.11.4) and Lemur is installed on an Android tablet (Xoro Megapad). I have tried WIFI via the Fritz.Box, both connected via ethernet to the router (Fritz.Box), as it worked before, but no luck! The Deamon just crashes overtime, I try to connect any port. Instantly, when trying to connect from the Lemur app, with a de…
0 replies
TroubleshootingRange object
Hi all, Been quite a while since I've been here. Dusting the cobwebs off and working on improving my app. I use Lemur for a lighting controller and have been for a few years. Recently I picked up a couple of lasers and wanted to be able to move the x and y positions (using a multiball object) but a few other parameters. Need a better way so I've set up some faders. I also wanted to be able to set up oscillators on the parameters so I have coded oscillators using OnFrame and they work great but n…
1 reply
Troubleshootingmidi thru
i made a template for the akai synthstation which converted the mod wheel into any controller, it also used the 4 top buttons and the prog change buttons this works great, but i have to use the midi bridge app to divert note on/off messages from lemur. because the only way i can find to achieve midi thru, through lemur is by using a script , this works ish but the latency is high and there are some stuck notes. is there an obvious way that i'm missing that midi thru is achieved without using a s…
3 replies
Troubleshootingglobal preset
hi lemur people i recently discover lemur, and didn't expect it so powerfull .. and complicated ! i came to lemur after get bored of touch osc, looking to find a solution to preset parameters of generativ visual process. basicly, i create interactive visual, by cumulating patches, FX, and rather big process, that are sometimes realy sensible, with a lot of parameters (for sound people, imagine a kind of big vintage analog synth... ) so i allready easily undertand the basis of lemur editor, and b…
0 replies
TroubleshootingCan't connect with Resolume
Hi, i have problem - i've setup everything but still cant work with resolume... Lemur IP: 192.168.0.12:8000 OSC0 - 192.168.0.9: 8001 (Main PC with resolume) Resolume: OSC Incoming Port: 8001 OSC Output: 8000 (bundles not selected) Send to address: 192.168.0.12 What's wrong? Do i have to setup something in Lemur Daemon? PLEASE help me :) EDIT: iPad - WiFi PC- Lan cable but same router etc
1 reply
TroubleshootingSwitches and why they moves
hi, i just encounter an interesting problem. I have placed a lot of switches, they don't move they have a strict placement, and in combination with menus i hide or show them as needed. So for some reasons i don't know, some of the switches move to the far left, out of the screen. I dont change their position at any time, so how this could be? Tried to untick the capture options, nothing in behaviour changed. (for now i set all the switches each time i hit a menu button). Anyone can explain this.…
0 replies
TroubleshootingPads to Program Change
Hi I need help with this: I create a group of pads 7x4 = 28 (pads) I want each pad to send a prg. change, like this: pad1 = 1, pad2 = 2 and so on, when it's activated. I have tried this: I declare a var: decl pgnum; And pgnum=firstof(pads)+1 // I hope this will return 1 for pad1, 2 for pad2 and so on. Last I create an out() and set it to prg. change and set preset to pgnum But the firstof(pads) is always 0, and only the first pad sends a prg. change. I really could need some help here, and I hav…
1 reply
TroubleshootingLemur Loses it's smooth textures.
Hi there, I am having a strange problem with lemur. When I connect it to my computer through Wi-Fi, It goes from curved edges to linear edges on all the objects in any project I open. Is anyone else having this issue?
0 replies
TroubleshootingLemur to Control Hardware Instruments
Hopefully someone can assist me with some of the basics on my first and most important button in my Lemur template. "Play"! I have Lemur on an iPad4 connected to connect midi 4. This is going to be driving my Midi Chain of devices, I hope. I am starting with testing on Roland TR-8 and optionally Akai Rhythm Wolf, just so I have a second device. I was able to figure this- Make a button, Obj Target = 0 iconnectmidi4 on midi port 1 -connection is good. Target = 0 Message = FA - Start Song. This app…
1 reply
TroubleshootingWorking on Setlist, need serious help!!
Hi everyone, I need help with a script to have one custom button send same data to different objects, one a a time, depending on the position of a switches, with twelve columns. I need a way to maybe 'change' the object's name in relation to the switch. Like: Switch 2 is On then, touching custom button will send data to 'name of object' plus 2. Switch 5 is On then, touching custom button will send data to 'name of object' plus 5 and so on. So far I have this script working, but I will be adding …
0 replies
TroubleshootingIntermittent connection after adding new USB keyboard
Hello all, I've been using Lemur for several months with no issues (after getting everything set up) but am suddenly getting frequent connection loss. The only thing different in my setup is I just added a new USB keyboard (Studiologic SL88). I'm on Win10 and am using loopMIDI to configure the ports. Is there any way the new ports for the new keyboard have screwed up something in Lemur? I can't see any difference in the app or in the daemon. When the connection drops the loopMIDI dialog shows no…
4 replies
TroubleshootingDaemon wont open (Yosemite updated for Security reasons)
I'm on Yosemite and today (March 23rd 2016) I updated the OS (security update). After that I cannot access"Setup Lemur Daemon" in order to configure Midi in and Out. It sits on my menubar without any problems but it won't do anything. I have to make it work really soon because of a gig! Thank you ps: I'm posting this also in Introductions because of forum rules (1st post)
1 reply
TroubleshootingThis HAS to be a bug...
Not enough room for a descriptive subject line, sorry. Trying to programmatically (script) "press & release" a pad that has scripts attached to it's rising and falling x values. Not working. I've isolated the behavior in the very simple attached template. I'd be grateful if someone smarter than me would have a quick look. Description: You have a 1x3 Pad object that has scripts on the rising and falling x values which trip the WasPressed & WasReleased monitors. The RESET button resets the monitor…
3 replies
Troubleshootingsend second cc message
I am working on a template to provide insert processing and send effects in a live sound reinforcement context through ableton live. Each insert strip (currently there are 4 inserts and 2 sends; the limit of my audio interface) has several effects like gate, compressor, multiband dynamics, eq, etc.. What I am trying to accomplish is to have the relevant device selected in Ableton each time I move any of the controls for that device. Because device selection is midi mappable in Ableton I know tha…
1 reply
TroubleshootingLeMixxx Template Instructions
Mixxx 2.0 has been released , and I'm interested in using it with Lemur as a controller. I found LeMixx, a controller template But, there is only the Lemur template, and no corresponding mapping for Mixxx. The user who created/uploaded the template has a username I can't decipher , to try and track them down to ask them about it. Can anyone help? Is there a way to PM or comment on a template/module, and get the creator/uploader's attention? Thanks!
0 replies
TroubleshootingIpad Templates Folder
hi, is there a way to have more folders like 'Factory Projects' folder on ipad? i have a lot of versions that i am constantly accesing. folders would help. i have created new folder via itunes but it doesn't show up on my ipad. any suggestions? Lemur Ipad Templates marked.png
0 replies
TroubleshootingTap tempo and bank 8x8 problem
Hi, I have two problems with my lemur template : - first of one, I don't know how use the tap tempo buton, that doesn't work :/ - I have also a problem with my bank, when I have a 4x4 bank that work very well, but when I try to have 8x8 bank, it does not work properly. Thank you for your help :D Test seq lemur qlc 4.1.e.2 avec clock.jzml Test seq lemur qlc 4.1.f.1 8x8.jzml
0 replies
TroubleshootingTrack receive names and REAPER.
Hey all, I am so frustrated right now. I am trying to make a headphone mixer controller for my jams with friends. I have something that works, tho looks awful in TouchOSC. I have had Liine Lemur for quite a while now and am just coming back to it. I have some basic usage questions that I can't find in the manual. 1. How do I get track_name to show up in a label? In TouchOSC I just give it the address. I looked at Binder 1.1 and found that he used Control(OSC_ARGS) with a script, is it really tha…
0 replies
TroubleshootingLemur looses connection to daemon all the time
Hey, I made the failure to update to the latest version of Lemur (5.3.2) on PC and now Lemur is loosing the connections every 2 or 3 minutes. The pad is connected to the PC via an ad-hoc wlan. Any ideas what the solution could be? THank you in advance! Stephan
2 replies
Troubleshootingautomatic sending values to Kyma
I've built a Template for a Kyma Sound which can be controlled over OSC. Furthermore for two way communication between the Lemur and the Kyma I've written a small script (oscout(0,'/osc/respond_to',{8000});) which will be send on load. It works fine. But If I change a Preset in Kyma only a few values will be send to Lemur. One aspect to be aware of is that the Kyma System does not send update messages until the corresponding message is received from Lemur at least once. So part of my template in…
0 replies
TroubleshootingCan't set attributes with incoming OSC messages
The Lemur manual says that attributes can be set directly from incoming OSC messages using @ but I can't get it to work. I'm trying to switch on a label with this: /Pads @label followed by 1 or 0 for on/off? Anybody manage to do this? What am I doing wrong?
1 reply
TroubleshootingTarget a single switch and change it's color with a pad?
I have a project with a switch object, one row with twelve columns, and am looking for a way to change the color of a single switch by controlling it with a pad. I'm hoping to set it up so that when you tap the pad it will cycle through three different colors for a specific switch, and not all twelve at once. The only thing I've figured out so far is to set the attribute of the switch so that multiple colors show up. Yes, I am new to this. :lol: Like I say, I'd like to be able to control the col…
8 replies
Troubleshootingobjects flash to midi daw send. How?
The lemur iPad interface is a great extension to control bitwig from my electric drums(TD-20). I have working faders for click volume and every drum. It would be nice if my faders and objects could flash when the corresponding drum was hit or signal from a daw track including tempo from BW. This would allow me visual feedback for quick mixing. I absolutely see the advantage to scripting, though I've tried and tried to make this happen. So I'm asking two things.... 1. What is the best way to get …
0 replies
TroubleshootingLemur Daemon doesn't save its setup
Hi, About half of the times I reboot, Lemur Daemon forgets its port setup and everything has to be redefined from scratch. Could this be a permissions issue? Please fix. Thanks.
7 replies
TroubleshootingPad w. framecounter won't work without monitoring. WTH??
I wanted to make scripted button(s) that send continuously while pressed (x=1), but not too fast you know - it's sysex after all. But now the frameCounter script will not reset without monitoring the button output. I don't have the slightest idea what's going on... You'll see when commenting out one (or both) Monitor objects' values, Also one button sends 2x slower than the other. With exactly the same script. And the behaviour is intermittent (between buttons). Does this have to do anything wit…
2 replies
Troubleshootingtrouble connecting lemur to OSCulator
it worked fine for a while but the connection has become spotty as of late and now is completely non functional. I'm running Lemur 5.3.2 on iPad and Osculator v2.13.3 on a Mac Mini Both are on the same wifi network. OSC host IP matches computers WiFi IP, osc target port is 8000 from lemur and OSC input port is 8000 in OSCulator My MIDI targets I've left blank and disabled as this doesn't seem to make any difference. I am using OSC messages and MIDI CC faders OSC messages from Lemur aren't reachi…
1 reply
TroubleshootingIconnectMIDI2+ not working with Arts-Unmuted Templates?
Hello everyone! So recently I purchased an Iconnectmidi2+ interface with the intention of using it as a means of bypassing the lemur over WI-FI setup. I primarily wish to use lemur to send key command changes to Logic X. I have been able to use the Arts-Unmuted templates to achieve this in the past when I have had the fortune of achieving a successful wireless connection. The issue that I am having is that I cannot get the Arts-Unmuted templates to talk to Logic over the Iconnect interface. Any …
1 reply
TroubleshootingIs the new Lemur Update Stable Now
Recently I've seen different posts saying that the new Lemur Update had some bugs... Is it safe now to update the app on my Ipad Now?
2 replies
TroubleshootingDoes not send OSC commands when controlled by a midi device
Hey guys, I've got the next problem here: I want a Midi device to control Lemur Android (works well in both directions). Let's say we have a knob in Lemur. So turning the assigne knob on the midi device lets the knob in lemur change values and vice versa. Great. But now I want to go a step further and remote a DAW by lemur at the same time. So Midi device controls Lemur, while Lemur remotes the DAW via OSC. And there is the problem. Lemur sends out OSC when touching it directly on the android ta…
13 replies
TroubleshootingLemur Daemon loses settings each time I start my Laptop
Another problem: each time I start my laptop I have to setup Lemur Daemon. Where does it save it's settings? What can I do? This is REALLY enoying.
3 replies
TroubleshootingResolution on 1920x1080 lcd monitor only 960x460?
I have a MX 3 android TV box that I have plugged into a Hanns.G HT231 multi 10 touch HD monitor so I can make a big mixing console using Lemur. The problem is that on the android app the display isn't the correct size as the mixer is too big and will not fit on my screen without scrolling up and down and side to side. In Lemur in the "settings" page the resolution says its 960x460 and I can't find away of changing this. In the Lemur editor on my windows PC I have set "Manage resolution" to be 19…
17 replies
TroubleshootingLemur -> Reaper: Just works in that direction
Hey, I'm very new to Lemur and want to control Reaper in live situation (FOH) with that via OSC. The Lemur -> Reaper direction works well. Reaper reacts to everything I want but the other way is dead. You find the settings I made in the appendix. I use a Router (TP Link WDR3600 N600) but even tried a Wifi Direct connection with no success. It's possible to remote control the Behringer x32 Mixer via OSC from the same laptop, so I think network and laptop are fine. Does anybody have any suggestion…
2 replies
TroubleshootingMultiball - Return to default position after release
I realise this may be very simple to do, but after hours of trawling through search results, I am still no closer to the answer. I wish to have a multiball module with a single ball which resets back to position 0x0 when let go of the ball. How would I accomplish this? Thanks in advance!
1 reply
Troubleshooting