General
Get help, share ideas, and discuss all things Lemur
Sign in or create an account to join the conversation.
Topics
Midi control query
Hi, I've made a controller template to control modul8 VJ software. Part of this template is a grid of buttons that I wish to use to control a sequencer within modul8 So 16 buttons cover one bar of music. So if the first button is on a video clip will appear on screen on the first beat of the bar for 1/16 of the bar if the button is off it won't appear. In modul8 it has the 16 buttons to do this and if one is in an on state it is red and if button is off it is blue I have set up a similar looking…
3 replies
TroubleshootingSysEx messages too big?
I read that the current SysEx message limit in Lemur is 256 bytes. Is there any existing way around this? I am trying to write a Lemur interface for my MicroKorg, and am trying to get the patch loading right. I am able to send a SysEx message to the MicroKorg to trigger it to send a dump of its current program, however the size of the current program is always 297 bytes, and the MIDI implementation for the MicroKorg doesn't allow you to get the patch information in any smaller chunks. I was thin…
3 replies
TroubleshootingOperate Multisliders with one Fader or another Multislider
Hello all!!! I'm am learning bits and pieces in scripting and I need some info on how to operate Multisliders with one Fader or another Multislider. What would be the script? Thanx!!
2 replies
TroubleshootingConnect two Lemurs via OSC
Hi, I have two iPads with a Lemur App on both. I set the second as OSC target for the first. Port is 8000. Both lemurs have the same project loaded. All controls send to OSC 0. If I'm right, then touching a pad on the first lemur should highlight also the corresponding pad on the second. But this is not the case. Any suggestions? Thanks, Gabriel
0 replies
TroubleshootingQuestion regarding menu objects
I have a rather complicated problem regarding bidirectional menues with scripts in every item. When i load up the Reason document that is connected to my template, Reason sends all parameters to the template but i just want the menu objects to be visually set and not releasing the scripts that get triggered when a menu item is selected because that messes up my Reason document (has something to do with the order of the CCs in the scripts). Another thing is: how do i make a menu item trigger, tha…
0 replies
TroubleshootingLemur 4 connection on OS X
Howdy all- I'm a bit confused as to how to connect the Lemur app to Ableton in OSX (10.6.8). On previous versions I've set up the AdHoc network, rigged the Dameon and Editor just fine. But on this new version, do I need to be running the editor if I'm using the in-app editor? I can get the Daemon setup fine with ports, and can get in the in-app editor running just fine. But I cannot get the Lemur to get picked up by Ableton. By turning on the Editor on my desktop and hitting the connect switch i…
0 replies
TroubleshootingAbleton devices + Mu for ipad issue
Hello everyone, First time poster here. I would really appreciate some advice for a small issue I've been facing. I've recently installed Lemur for Ipad and got the Mu template to work with Ableton Live 8.3.4 by following all the steps in the manual. However, I cannot seem to get the ableton device controllers to show up in Lemur for some reason. The application is actually recognizing them but when I choose a device to control it's taking me back to the please choose a device page. I've looked …
5 replies
TroubleshootingLemur Setup Guide - Mountain Lion
I followed every step by step on the tutorial video, but does not work at all. I tried several other ways, I turn on and turn off dozens of times, not connect, impossible. The Ipad does not enter in the ad-hoc Lemur network created on my MacBook Pro. Please How to proceed?? What is wrong? When creating the ad-hoc network, there is no option "11 (automatic)" ... OSX 10.8.2 - latest Lemur for ipad version - iOS 6.1.2 iPad3 Anyone? Liine team, support please!!!??????
3 replies
TroubleshootingThe Lemur editor stop showing up
Hi The Lemur editor stop showing up at some point. I don’t know what made it so. I can activate and quit the application. Just the window doesn’t show up. Till it happened, it was working fine. I remember I could fix it once I deleted 2 files in the “Preference” folder before, but this time I can’t find the files to delete. What I have changed was Mac OS. It used to be a OS Lepard. Now I am running Lemur on OSX Mountain Lion. I don’t know this might be a cause, but Please let me know any possibl…
1 reply
TroubleshootingRemoving or disabling the settings tab?
I'm setting up a controller that is intended to sit in a dj booth and give whoever is in there limited acces to the visuals in the club. A large part of my brief for this project is to make it "idiot proof".. the ipad sits in a security case removing any acces to the buttons. so far so good.. the only potential danger is the user having access to the settings page, especially the 'edit project' section!... giving the user an opportunity to edit and delete the template could be disastrous.. so my…
3 replies
TroubleshootingLemur Daemon - Not saving settings
Hi! Downloaded Lemur and the Mac editor/Lemur Daemon the other day - very pleased with it! I only have one issue, I'm on OS Mountain Lion 10.8.2 and Lemur Daemon won't retain my midi settings/Launch at start-up check box after I restart my computer. I have worked around the start-up issue via the 'open at log in' option in the dock, however the midi settings problem remains. Is there a solution for this? Many thanks!
1 reply
TroubleshootingClaviamat's switch mode not working
I have implemented Claviamat in a template of mine but its been quite some time since I tried to switch on the "switch" mode. What this does is it keeps the notes triggered held until you press it again. Unfortunately not only my template but also the original Claviamat versions' "switch mode" do not work anymore (Im suspecting they ceazed working right after Lemur 4 I just handt noticed). Particularly of all the columns of keys (key, key2, key3 etc etc) ONLY the first one works correctly under …
4 replies
Troubleshooting2 ipads 2 wifi set ups one computer
Hello Ok I have spent too much time on this one so please help me. I'm running qb edit on the Lemur on iPad 1 (A) with an ad hoc (D-Link wireless usb adapter) setup work just fine. I run the VSL (Vienna Symphonic Library) remote app on iPad 1 (B) with a browser set up (modem wifi) it work just fine, however it shuts off the connection of my ad hoc. The internet is not being used by the computer in question which is running on Windows 7. (the modem is providing internet to other computers via a D…
6 replies
TroubleshootingMu - Sudden Demise
So Mu stopped working for me. It does work while editing in the Max engine, but various IDs and such lose scope while under the tender mercies of Live itself. So I suspect something has changed in Live 8.3.4, as this is the only change to my system that could possibly affect Mu to take place within the timeframe we're talking about (within the last week). I guess consider this a cross between a RFC to confirm if 8.3.4 is the culprit and a PSA that 8.3.4 is (probably) the culprit.
0 replies
TroubleshootingLemurized Reaktor ensembles not sending OSC
Hi everybody, I recently got the Lemur app (I always dreamed of owning a jazzmutant Lemur!) so I am new to this… To check out the beast I downloaded the ABLemurBundle which looks absolutely fantastic but I quickly got really frustrated as I was unable to get the ensembles to send any OSC to my Lemur. I am using a mac running Reaktor 5.8. Here is a quick description of my problem: Lemurized L3: I can control the ensemble from Lemur I was able to create a knob in Reaktor and send OSC to a fader in…
1 reply
TroubleshootingMU not working with Ableton 9 32 bit Beta
Set up Ableton Live 9 (ob67 Build 2013-02-12 32 bit) Max 6.1 Trial (DL from Ableton) Lemur 4.01 iPad1 ASUS G74s Laptop Windows 7. When Ableton is open and the MU.amxd is dropped on the master track things seem to populate properly the Lemur updates and follows action that take place in Ableton i.e. transport tempo clips etc all update in Lemur, however action used on Lemur are ignored in Ableton. The show hide arrows do not work for the faders, sends, pans, mutes, solo etc. Only the show hide ar…
0 replies
TroubleshootingNot getting correct MIDI ports to show up
In the tutorials I've been using to set up LiveControl with Ableton and my iPad it tells me the ports that should show up should say "from Live Control 1" or "from Live Control 2" but all i get is "Microsoft Synthesizer" and "Microsoft GS Wavetable Synth." In both the tutorials I've found, they are set up to be ran on MAC OS so it can be a little bit confusing at times. One of the tutorials says to download and install MIDI Yoke, which I did, but it's a very outdated program and there are no ins…
2 replies
TroubleshootingSwitching between templates on the fly in Reaper - problems
I'd like to be able to use different templates back and forth in a single session, i.e. use a mixer template to set levels then switch to a soft-synth template to tweak one of my synths, then go back to the mixer and make more adjustments...etc. etc. etc.. The problem is that when I switch back to my mixer template, all the settings disappear - the track labels default to "Text", the mute/solo button statuses reset, etc. Very frustrating! Is there a solution to this? Thanks, Ishaan
4 replies
TroubleshootingLemur crashes when setting knob to Bipolar
Lemur won't allow me to set knob object to bipolar behaviour, just crashes. Only allows endless rotary behaviour as well as default. NB this occurs within editor (nothing else connected) Anyone else witnessed this behaviour? Any suggestions? Win 7 Q.core i7/iPad V1 latest Lemur V4.0.1 on both.
5 replies
TroubleshootingEpic Fail
So I just got this Lemur app a week ago, and I had a blast building interfaces for my Ableton Live set. I have a weekly gig in a club and decided to break it out. I had a huge list of midi mappings and tested it out a little before I left the house. All seemed to be in good order. I showed up to the club and hooked it all up with my APC40. But once I was there and started playing, I would move a fader, have it move in the software a second later and then get stuck for the next 5 seconds after i …
2 replies
TroubleshootingNumber of characters limited in scripts?
Hello all, I have the problem, that i could not enter more than about 4015 characters (incl. space and tab) in the editors script window. Is this a limitation in Lemur 4 itself or in the editor for windows 7? best regards Alex
4 replies
TroubleshootingControll Breakpoint(s) with Faders
hey, i want to create a simple envelovpe, which i can controll with 4 faders. fader1: Attack = point2.x fader2: Decay = point3.x fader3: Sustain = point3.y/point4.y fader4: release = point4.x i tried but i dont know how to script it.. help please^^ http://www.bilder-upload.eu/show.php?file=d1ff89-1360345981.jpg
5 replies
TroubleshootingProblem with spaces in strings that are stored in variables
I just encountered a problem while trying to store a string in a variable that I created inside a container. When I write 'A B C' it will be changed to 'ABC' When I write 'A,B,C' it will be changed to 'A, B, C' So how can I store the strings exactly as I want to (without converting it into an array of numbers)?
0 replies
Troubleshootinglemur on the stage ....and wifi...
How do you use your lemur . I use both midi and osc on the stage. Then is it reliable? . No . Drop out , disconnected . Contrary to the legacy, the wifi connection is really far from " a trusted connection " i can t use my lemur with my mind free when i am on the stage and that s a big big problem for me. I need the lemur , i use it i develop on it. We need a wired connection . For a home working ok , you don t move, everything is under control....but on a stage !!!! Are you kinding ? Lemur? pro…
43 replies
TroubleshootingNoob question. Midi remote / sync over wired iRig connection
Hey all, Ok I've scoured the net for most of the weekend and read through the forums here quite a bit but can't find a solution. I think I'm missing something, I'm experienced with DAW / VST but this is entirely new to me. Eveyrthing I've owned through the years has been USB MIDI, outside of that I'm a total MIDI / Lemur noob. I'm running WIN 7 64. iPad Mini to iRig MIDI , MIDI out to TC Electronic Konnekt 24D which is my interface. MIDI out from Konnekt to MIDI in on iRig. Wired Connection only…
8 replies
TroubleshootingMenu not usable at the bottom of a page
When I place a menu object near the bottom of a page it's unusable since its items aren't (completely) visible when I open it. Bug or feature? I'm using Lemur 4.0.1
2 replies
TroubleshootingHow to change button colours on iPad
Hi there, I have been endlessly searching how to make the buttons on the ipad respond to changes from Ableton by changing colour. I thought would be a standard part of Lemur programming and relatively simple thing to do but I have spent days trying to work it out!!! I've got a series of big events coming up and I've got to make it happen somehow! I have created a simple Lemur grid of 70 buttons for launching clips in Ableton live. This has been easy and has just meant assigning buttons in Midi M…
10 replies
TroubleshootingMy iPad mini can't connect my Mac mini server
Hi everyone I use Mac mini server 2011, Run Mac OS 10.7 I use ipad mini to connect Mac mini server, I follow the web support video "HOW DO I MAKE AN AD-HOC WI-FI CONNECTION TO MY MAC?" But my iPad mini airport symbol doesn't appear. Can somebody give me a tip to fix this problem. THX
0 replies
Troubleshootingcomparing strings
If I enter 'cat' == 'cat' in monitor value, I would expect to get 1, but instead the editor crashes. Same if I enter 'cat' != 'dog'. If i do the same inside a script, it doesn't crash, but I don't get a result. Is there another way to compare strings? Is this a bug? Thanks, A
3 replies
TroubleshootingHow do I randomize the state of a Switch?
Hello. I would like to randomize the state of a switch w/ a pad. I'd be very grateful for any help I can get. All the best Daniel M Karlsson RandSwitchState.jzml
2 replies
TroubleshootingUsing multiple deamon on same computer, is it possible?
Hi guys here is a probably simple question, but cannot find an answer myself.. Is it possible to send, from the same project in Lemur, for example CC 1=; Midi CH=1; Target= Midi 0 and CC 1=; Midi CH=1; Target= Midi 1 each of them to different parameter in the same computer running Live? So basically, can I send 128x16 Control Change, or 128x16x8 Control Change? Thanks!!
2 replies
TroubleshootingLemur OSC message size limit?
I have a script that iterates (for loop) through 64 MultiSlider.x values and sends a unique OSC message for each. Everything appears to be working correctly on the script side. However, Lemur only sends the first 36 messages (or 44 if I shorten the message). It doesn't matter which step I start the loop on, it will only send 36 messages (or less if it reaches the end first). I've checked on 3 different OSC monitor apps, and all 3 produce the exact same result. I'm guessing that Lemur doesn't sen…
3 replies
TroubleshootingSending Sysex via Lemur?
I'm trying to control my Alpha Juno with the Lemur patch in the user area, however i know for fact it uses Sysex to control the Juno. Unfortunately i just found out Live 8 does not support Sysex, therefore none of the controls work.. Am i stuck with the only option of buying an iRig Midi / iconnect / DAW that supports sysex for this particular use??
0 replies
TroubleshootingLatency and networks? Help!
Hi, I can connect to the Lemur editor and Ableton live 8 on my Macbook Pro from Lemur on my iPhone over wi fi. The latency is small but it is too big for effective real time drumming on the drum pad. I tried to connect over an ad hoc network and managed to sync the Lemur editor with the iPhone. However, the midi messages were not being received by Ableton through this route. Can anybody help me sort the latency? Or the ad hoc connection? Thanks!
0 replies
Troubleshootingmacbook pro cant connect to ipad mini HELP!!!
Hi i am using serato 2.4.3 i have a macbook pro 13in. 10.8.2 and the new ipad mini on ios6 and the lemur 4 and for some reason i cant get it to connect any more. Before the lemur update on my ipad i was fine and it was working. I would create a new network name it lemur next take my ipad look for the new network in my wifi setting click on the new lemur network i made but it would not connect on the ipad can some one help please thank you!!!
2 replies
TroubleshootingSuddenly cannot use arguments in functions
I was about 90% complete my Lemur project and now it seems completely disfuctional. I have narrowed down the error to all scripts that have arguments, but not sure where the issue was created. Bascially I can load my .jzml file and everything looks to be fine, but if i try to add a new script or send it to ipad and suddenly every script that has an arguments like monitor(MIDI_ARGS) or findmiddle(x,y,z) turns to errors :!: If I load any previous project which I know has no errors, it still contai…
1 reply
Troubleshootinghow to use setexpression with radiobuttons
hello, I am trying to set a radiobutton to a certain state with another button, but it does not work. what i tried: 1. to use a normal "button" to change the state of another button called CustomButton2, this script works; "button" sets ' CustomButton2.x to "on" or to "1'.. script used in the "button": setexpression(CustomButton2,' x', 1); 2. to convert this script so it will be usable for radioswitches, normaly you adress a radioswitch like this: 'x[0]' for the first button, 'x[1]' for the seco…
3 replies
TroubleshootingiOS 6.1
Hello Folks! Does anyone here use iOS 6.1 yet? Are the wifi/udp issues solved?
3 replies
TroubleshootingIpad/lemur to midi mobilizer 1
Hello, i'm going to be mad! Ok, i have à midi mobilizer Line 6 which works nice with quite all music apps like touch osc. But it never works with lemur!!! And i need to use lemur to control my analog synth. Anybody knows how to do?
0 replies
TroubleshootingCreating Transpose buttons for Keyboard
Okay, so i'm having trouble coming up with how to get this to work. I have 12 custom buttons functioning as a keyboard. I want to create two other custom buttons that will incrementally increase or decrease the range of the keyboard by octave. I cant figure out how to get the the script to recognize the midi note numbers in the midi mapping page. I thought it would be similar to identifying an attribute in an object, but i just cant figure it out. Any help would be awesome!
3 replies
TroubleshootingSending program change to Sylenth (vst synth)in Ableton Live
ok, so I have got Lemur communicating to Ableton Live, and can play notes in Sylenth however I am struggling to get program change configured and working, to allow me to change patches in sylenth using Lemur. Using live 8 full, but not the suite Can anyone help?
1 reply
Troubleshootingeditor 4.0.1 crash
hello. I updated my lemur editor yesterday and something goes wrong now... I ran lemur on ipad 1, last version of the app. my project works on 2 pages, but when I try to go on page 1, editor crashes. there is no fancy things, it's "classic skin" project window is reduced by defaut I have to push "+" to open it. then I see all my pages and all, but when I click on page 1, editor crashes... it doesn't care if lemur on ipad is connected or not. so I can't update or work on my layout anymore... have…
5 replies
Troubleshootingarraytostring not behaving as expected
My template (EvolverProgrammer.jzml - attached) receives a 226 Byte SysEx dump in function ReceiveState(MIDI_ARGS) then uses a function ArrayToHex(array) to convert 8 Bytes to hex, and then return them as a string using arraytostring. This string is then displayed on a monitor object. Since I only do 8 Bytes at a time (this is the "packet" size for the DSI Evolver) I need to make multiple calls to ArrayToHex(array). PROBLEM: the 15th call to ArrayToHex(array), and every call after that returns 0…
3 replies
TroubleshootingNo usb midi session
Hello. I got problem with my setup. I use Camera Connection Kit + usb-midi interface. When I open project settings I don't see any session to choose either for input or for output ( http://img21.imageshack.us/img21/3148/31350687.png ). It worked for me once somehow with MidiBridge, but now I can't set it up with MidiBridge or without. Any idea?
3 replies
Troubleshootingmultiball all balls same output :(
I use lemur 4 for iPad I can make a lot of balls in a multi ball screen. But: How can I make every ball to have it's own midi output? I need this to control different parameters I hope someone can help me with this __________________
4 replies
TroubleshootingHelp with NRPN for Analog Four
I picked up an Ipad today and the first app I bought was Lemur. It's fantastic, but a little overwhelming! Anyway, I'm trying to create an editor for the Elektron Analog four. Things are going smoothly for the most part as the majority of parameters are controllable using CC, however there are a few that require NRPN data to work. For instance, oscillator detune requires: NRPN MSB: 1 NRPN LSB: 2 Now, I've played around a bit with the NRPN test set and deduced (perhaps incorrectly) that MSB 1 LSB…
0 replies
TroubleshootingStoring real-time automation data
Is it technically possible to record movements of controllers for a long period and when recall it, with only Lemur's inner scripting? Could it be it's impossible due to limitations of values storing?
3 replies
Troubleshootingfaders stutter when drawing CC commands?
Hey all, I got a weird problem and I guess it is Lemur controller 4 related. I have a little self made template and I got 4 faders going to control CC01, 07, 11 and 64 with it. However, when I want to record etc. a CC01 "modwheel" lane inside Cubase it works fine for a bit but then starts to stutter. I can't dran curves or fine variations anymore. It feels as if I would run an extensive game on a crappy graphics card :) Can anyone help me with this? I am in Cubase, Win7, got Lemur 4 connected wi…
8 replies
TroubleshootingButton to send specific number to program-change fader?
Hi, Is it possible to make a "button"-object in "pad"-mode send a specific number to a "fader"-object sending program change-messages? For example: pressing one button makes the fader in the interface go to 98, another button makes the fader in the interface go to 56 and so on. Is this possible? I really hope you can help! Thanks a lot. Best, Anders Bach, Denmark
8 replies
TroubleshootingCustom Buttons as pads get stucked
Hello There. Iam working on some custom buttons with pad behavior. They work mostly as they should, but sometimes thet "get stucked" Said with other words, the buttons wont "turn off" again as it should in pad mode. As said this only happens like 1 out of 10 times or something, when I press the button Has anybody else the same problem? Or Please help -alloedee
0 replies
Troubleshooting