General
Get help, share ideas, and discuss all things Lemur
Sign in or create an account to join the conversation.
Topics
First post help with dynamic cc multiball object
Hi I'm new here just getting into lemur about a week and seem to be having eureka moments on a daily basis but still got huge gaps in my knowledge and I'm struggling a bit I have learned a great deal from your posts and the manual and examples but find the lessons are not very midi orientated which is what I need ,I can follow the examples in the manual but they mostly don't include the midi control element so I'm struggling to work out how the actions link to actual midi control I am using lemu…
2 replies
TroubleshootingSimple Question
I did some searching in both forums and KB but didn't find anything that addressees this: So, I have TouchOSC and TouchOSCBridge. And I downloaded LiveControl 2.1. But don't I need to somehow get a new template into TouchOSC? They have a LiveControl template but I think that's for an earlier version. When I choose it, no messages arrive in Ableton. But if I switch to the Simple template then messages do arrive. (Though the drum pads are a bit off.) Do I need an updated template inside TouchOSC t…
2 replies
TroubleshootingSlow down output frame rate?
Anyone have an idea how to slow down the output rate of osc values. Only way I could think of doing this is to separate all the osc output into a script that is able to throttle the output against the time function, though I'm really not sure on the best practice for implementing something like this or if this is the right way to go about throttling the output. Side note: I'm trying to control a bunch of strip lighting attached to a raspberry pi via two 16 channel PWM driver boards. On Lemur I'v…
0 replies
Troubleshootingtyping trouble
since I installed version 4.1 I can not use the alternative key of my keyboard to write for example "{" or "[" !!
3 replies
TroubleshootingGet\post the index value of a Switches object
I'm trying to send an OSC message for the index value of the selected switch in Switches object (+1). Within "Switches1" I've created an expression called index : firstof(Switches1.x)+1 I'm also trying to post that value onscreen in a monitor object using the value Switches1.index I don't think the index is actually populating with the selected Switches index (+1), and I certainly don't see it showing up in the monitor object. What am I doing wrong ?
1 reply
TroubleshootingMultiball
Hi, I'm new to Lemur and want to use the MultiBall component to control a synth in Ableton Live, basically a Korg Kaossilator or a Misa Kitara. How would I go about doing this? Thanks in advance Jake
0 replies
TroubleshootingMidi Channel CrossTalk
So, I have a templet with 2 modules within. One to control a specific device (external synth) the other is freely assignable multi-ball and custom buttons (for text). The problem I am having is, the first module is set to send/receive on "midi-0" (which I would assume lives on "Daemon-0" by default) and the second module is set to "midi-1". Therefore it seems that as long as I set Midi-0 to send to my synth it should only talk to it, where the freely assignable module should just send and receiv…
4 replies
TroubleshootingSetting up Daemon
I have launched Daemon and am trying to set it up for the first time but there is nothing shown under local and remote ports. What do I do next? Thanks.
5 replies
TroubleshootingSuper Bass Station sysex parameter change
High everyone, I'm working on an interface for the novation super bass station. The CC implemetation for the knobs seems like it will be fairly straight forward but I'm trying to figure out how I might implement the switches (LFO shape, range, sync, pwm source and cutoff mode). Though I think I might be able to control them using sysex commands, I am not certain: I have seen editors that implement these switches so I'm thinking it must be possible (manual says it sends and receives sysex). Searc…
1 reply
TroubleshootingLogic Pro 9 forgets controller input
Hi everyone, I'm using IOS Lemur to control a few things in Logic. I have a few buttons for instance in Lemur designed to send MIDI controller on a specific MIDI channel. In the Controller Setup in Logic I see Daemon Input 0, Daemon Input 1 etc... I set all the command to Daemon Input 0, save the song as a template. The whole setup works for a couple of days. After then Logic Stops responding to Lemur. If I reopen the Controller Assign page I see all the assignments previously made, but in the M…
0 replies
Troubleshootingvirtual midi connectivity
Why is Lemur having trouble communicating via virtual midi with so many apps? It is the only midi app that seems to constantly require the use of an intermediary app like FreEWI or MidiBridge just to connect properly. Examples - Cubasis, Loopy, iMini. Lemur has one job, and that is to connect with and control things via midi. Can this problem be fixed? If not, why?
2 replies
TroubleshootingVirus Ti template problem with filter 1
Hello, i have a problem with the Virus Ti template. Everything works except the filter 1. Thanks you.
0 replies
TroubleshootingWin 7 Can't be Connected with Host Name
Greetings! I have a following issue while connecting iPad 2 with the computer (win 7 home premium)... If I use IP address the iPad connects fine, but if I use the computer (host) name, it doesn't - written like hostname.local Using host name works on my winxp pro machine, so it must be something different with windows 7? Using the IP address on the other hand is a bit inconvenient. So much so, that I've quite often neglected to use Lemur and done "controlling" with a mouse instead. Thanks for an…
1 reply
Troubleshootingjog - how to decrease the speed
i got this working jog wheel from some template shared here, thanks to that person, i forgot who was, sorry. but, i am trying to use it with Traktor & also on DJAY (Algoriddim) ... the speed of this jog is very fast. i do not understand the formula, could anyone please help me how to make this jogwheel from `corse' to `fine' ? even further i would add a button to make it switch from `corse' to `fine' thanks working-jog.jzml
1 reply
Troubleshooting4.0.3 crashing and unusable, still skin problems?
Hi, 4.0.3 is crashes immediately on my 'pad, both when I try to connect with it over wifi from the editor OR when I try to open a new project from within the app itself. I have read about the editor crashing with bipolar issues *how fitting* and have tried those solutions (save project as classic, turn off project skins) but no luck. These dire problems appeared suddenly after I started fooling around with skins. Never thought such a 'benign' function could bring an app to its knees. Help. Pleas…
2 replies
TroubleshootingLemur Editor crash at paste OSC message
I'm tryng to make an personalized interface for Silent way and when i try to paste an OSC message in OSC message field (with custom message activated) the editor quit itself, any suggestion ?
0 replies
TroubleshootingText -lemur editor crash at open- [report]
hi from a custombutton for change text display on "Text" object... when I am using : (script) (mode: expression) decl stateLabels = {'String','Noise','click'}; decl MAX = 3; id += 1; id %= MAX; setattribute(Text,'content', stateLabels[id] ); Lemur editor crash when i'm loading the template. if i write the code and try it all is ok, but if I close lemur editor, launch it and load the template lemur editor crash at open... Is there something wrong ??? If you have an idea to solve it ??? I'm using …
3 replies
Troubleshootingcopy text from editor to external text editor
I can't copy text from 4.0.3 editor to OSX system clipboard, so that I can use an external text editor. Help!
0 replies
TroubleshootingOSC length wrapping issue with @colors
hi, so I'm dealing with a persistent problem that keeps coming up for me (and that I've attempted to deal with in the past but failed) Sending "Pads @colors i i i i ..." messages to a 16*16 Pad object is fine, up until the 256th pad, which will then wrap and display the first pad instead. Is anyone else seeing this? I'm definitely sending full lists without wrapping, but no dice - it definitely behaves as if my object only takes 255 multicolor values. Similarly, I am unable to send much by way o…
5 replies
TroubleshootingApp resets connection
Hi, Ive noticed several scenarios (on windows), where the Lemur Ipad app just minimizes to the background. This seems to be because it loses connection. Any templates that are being used at the time need to be resent over to the lemur. The scenarios I have seen are when midi data is being sent, and also loading templates over a TCP connection. This happens to both Mu and Livecontrol. Is there anything being done to fix the Ipad app from this problem? It seems to be an inherent problem with the I…
2 replies
Troubleshootingintegrate Virus Ti template to Livecontrol 2
Hello, i have a question about Virus ti template and Livecontrol 2 on ipad. I'd like to integrate this template to Livecontrol 2, i saw that i can add pages to Livecontrol but i don't know how to add this template to the new page. Is it possible to use both on the same time? Thank you.
3 replies
TroubleshootingTurning Multiball physics on/off with switch
hi, How do I get a multi-ball to respond to a physics / on/off button? I can get the mulitball objects to respond to my 'global' physics controls of Attraction, Friction and Speed. Thanks
1 reply
TroubleshootingLemur Daemon wont start
When trying to run Lemur Deamon I get this : ERROR "Couldn´t bind to port 8001. Please check if port is used by another applicaton or service" dose anyone know what to do? thanks
5 replies
TroubleshootingSwitch outside of Container,
Hello, can someone help me quick, if i have a switch in the same container i use follow script line to reset the multislider. if (x) {MultiSlider7.x = range(sizeof(MultiSlider7.x), 0, 0 ); how i can set the project struktur in the script if i want to reset a multislider inside of a conatiner with a switch outside, if (x) { Container.Tab , MultiSlider7.x = range(sizeof(MultiSlider7.x), 0, 0 ); thanks
3 replies
TroubleshootingReassigning Midi channel for a full set of controls
Here's the problem: For my Live performance template setup works like this.... Tab1 - custom loader that loads the appropriate controls for that track/scene Tab2 - DJM style mixer i created for mixing (so i could sell my mixer and buy several plasma's for a video wall) Tab3 - Mu for control over Ableton Now that LiveControl is out...i'm doing the same sort of setup Tab1 - custom loader that loads the appropriate controls for that track/scene Tab2 - DJM style mixer i created for mixing (so i coul…
6 replies
TroubleshootingLemur Daemon names
Is it possible to rename the ports from say "Daemon Input 0" to "Daemon Input A" ? the reason is the app I am trying to use with Lemur is Algoriddim's DJAY and it cannot send midi out to host which has numeric in it's address, i.e. "Lemur Input 0"
0 replies
TroubleshootingWireless MIDI via Lemur - latency?
Hey, I'm thinking of getting Lemur now but want to know a few things about wireless connection and latency. Does anyone here measure the latency, the difference in time between doing something in Lemur and having the corresponding CC/note changes on the daemon machine. Has anyone had any trouble using a Win7 laptop with builtin wireless? I'm concerned about these issues because I dont want to purchase an iPad and Lemur only to find it is useless because of hardware or latency problems.
2 replies
TroubleshootingHelp with Installation (Win 8)
I New to Lemur, I have been trying to make the iPad to PC connection but couldn't get it to work! First The Lemur Deamon never show up! I can see the Icon on start menu but the app never showed up in desktop mode. I'm Using LoopMIDI which is can see the midi ports in ableton, Creating Ad-Hoc network instruction video never helped me so I'm Connecting the Ipad and the PC to the router MIDI network for now. When I look for MIDI ports in lemur app there is notion coming from LoopMIDI.
1 reply
TroubleshootingNew install, Setup issues. PLS Help!
hey, I have recently purchased Lemur for my brand new ipad, 64gb (4th gen) and for the life of me, I can not get this to connect to my laptop. It's an HP running vista. I have followed the video that Liine has provided, several times, and its not connecting. My ipad sees the adhoc network and when I try to connect, my laptop sees the connection as it switches its status to "identifying" but there is no "airport" symbol on my ipad. The laptop just keeps trying to find the connection. I have insta…
5 replies
TroubleshootingKnob middle click
Alright, so I feel like this is something that should be really easy to do, but I can't get it to work right. What I want is for a knob to "click" when x is near .5, or when the cc is neat 63, whichever....when it's halfway up. This is to put a click on an EQ knob, similar to on DJ mixers. How can I script this correctly?
3 replies
TroubleshootingUsing traktor s2 with lemur
Hello everyone. I tried searching but I haven't found anything that can help me. I want to use lemur for the remix decks in traktor pro and the s2 for the other decks. I've gotten lemur to work, but it disables my s2. I'm using windows 7 64 bit, and as you can tell I'm a complete noob. Does anyone have a tsi file to import or a link that would help me. Thank you
0 replies
TroubleshootingStep Sequencer for Impulse Device
I have been working on template to control the Impulse Device in Ableton. I have the sequencing down but cannot get it to output a specific midi note and all the sequencers I have found allow you to select a note. I have attached the file below for reference. Thanks! test2.jzml
0 replies
TroubleshootingMac - Live 8 & 9 crashing
Hi everyone, I have just purchased the Lemur App and have it on an Ipad mini. I have tried to run this on my Macpro laptop with Mountain Lion 10.8. I cant get a WiFi connection between the two. I tried on my Imac Snow leopard 10.6. I managed to get a WiFi connection (rechecked that I was following all the instructions correctly) I get the app going in Live 8 & Live 9 but after I get the app running and have say 2 midi control running Ableton Live 8 & 9 crashes. Has anyone experienced any issues …
2 replies
TroubleshootingCurrent page, active tab ?
How do you figure out on which page you are and also on which page is a given control ? Same question for tabs within a container, and objects within these tabs. And beside getting the attribute list count and attributes names, is there a better way to know which type of control you are dealing with ? thanks btw, lemur is crashing when calling getattributelist with the interface object ( top parent object)
5 replies
Troubleshootingissues with Traktor / Lemur
Hi guys i have set this up 3 times before and had no issues on other machines, not sure why this is happening now... im running lemur through LoopBe1 into Daemon - currently running the effects processor 43 that is in the community user library. the situation is as follows: all midi ports seem to be working right, when i change things on Traktor, lemur reads these changes and the values on the ipad screen change according to all my mouse changes on the PC however the uplink from the IPAD to trak…
0 replies
TroubleshootingOne button to reset other buttons that are on
I'm sure this is probably quite straight forward but I just can't get my head round it so putting it out there for help. I have got custom buttons set up as mute buttons for each chanel of my live show set up using ableton. These all work fine and when pressed mute the chanel and when pressed again un-mute the chanel. The problem I'm having is that I use 10 channels and if I mute multiple channels the turning them all off at the same time becomes tricky. What I would like is one button that will…
6 replies
TroubleshootingSend Object Attribute Messages Over OSC
So I have Lemur, Ableton 9, and Max 4 Live 6 - right now I'm trying to update the name of a Custom Button with the clip name (ala Ableton clip grid launcher) - the problem I run into is that when I send the message over OSC: /CustomButton/x @label_off nameofcliphere - nothing seems to happen on my Lemur. I've confirmed OSC is working bi-directionally and I've checked the Lemur manual and I believe the format I'm using is correct for sending attribute changes. Anyone else run into this same probl…
2 replies
TroubleshootingSending MMC commands from Lemur
I use Logic Pro as a DAW, which only will deal with one OSC controller at a time, and I want that to be my MCU Pro. However I also want to be able to use Lemur on my iPad to a least control the Logic transport via MIDI Machine Control when I am across the room from my DAW and other control surfaces. When I went looking through the user library, the only template I found that seemed to have MMC was the MPD24 emulation here: http://liine.net/en/community/user-library/view/314/ However, although th…
9 replies
Troubleshootingtypo problem?
Bonsoir, I'm on mac,with mountain Lion,with an AZERTY keyboard .Since the recent update,I'm not able to type in the editor characters like "^". Is this normal? (I'm using this character for expressions like:round(freqend.x[0]^5)*19980+20)).
3 replies
TroubleshootingMu & Max6.1 problem ?
Hi there, using Ableton Live 9 64bit, I'm also using Max6.1 for the Max for Live version. If I load Mu.amxd m4l device in my liveset, there are 2 errors: - OSC-Route: unable to load object bundle executable - LemurLoader: unable to load object bundle executable I bet it is about the 32, 64 bit of things, right ? Anyone can help here ?
2 replies
TroubleshootingCan I get Container Tabs to send MIDI?
I would like to send MIDI messages when I switch tabs in a container. Is this possible? When I select a tab in the editor, the MIDI mappings are all greyed out. Anyone got a neat workaround perhaps? Could also be useful when switching interfaces.
2 replies
TroubleshootingTraktor Pro isn`t working with Lemur
Hi everybody, i am pretty new to the Lemur thing. I bought it yesterday to extend my Setup. It`s a HP Ultrabook a Reloop Digital 2 ME and a IPad. I got the Adhoc network working and the Editor is connected and Sync to the IPad. So i think the midiports are working. BUT if i start a Template like the Traktor Ultimate from the library and start Traktor with the correct TSI nothing happens. No faders are moveable etc. :roll: . Has anybody a solution what could be wrong ??? TonSpur
6 replies
TroubleshootingHaving real trouble with Lemur
Hello there, I bought lemur over a year ago, with an alesis I/O dock and I have gone on many campaigns in order to try to get it working. I am fairly computer literate and I am above average on using my DAW, but, for some reason, I have not been able to process any of the information in the LEMUR user manual and I still havent gotten it to work. When I have emailed support, they pretty much have responded with, "try the forum, not our problem"..ha ha..so, here goes. I am running CUBASE 7.0.3 on …
0 replies
TroubleshootingWhen I press a button there's a 1 second delay..
Everytime I press a Button There is a 1 second delay how do I fix this I use the iPad - Studio Combo please help im new to this!
1 reply
TroubleshootingBetter latency with better wifi receiver ?
My desktop is connected to the outside world with a generic USB wifi receiver , will a better/more expensive receiver give me lower and more stable latency? Or will I just be able to move further away from my computer? Thanks
1 reply
TroubleshootingLemur not found in Lemur Daemon on MBP
Hi all, finally got an iPad 4 and bought Lemur almost immediately, as it was my main desire for having an iPad. I am trying to connect to my late 2012 MBP running Mountain Lion over an ad-hoc network. The iPad is able to connect to the network, but never appears in the Lemur Daemon. I read a post from December saying that it appears to be an issue with iOS 6, but I do not understand if there is a good work around. Can anyone help me get up and running? Alternatively, if I get the camera connecti…
1 reply
Troubleshootingbuttons to turn off when another pad selected
Hi there, i'm a noob to Lemur so please forgive my lack of terminology knowledge. I want to create a container and have 8 pads to select a preset sound in omnisphere. Lets just say i have sound 4 selected so the button is highlighted, then i press sound 5, can i get the sound 4 button to turn off? Like in the Rheynelooper template with the keyboard octave buttons, how when you press octave 4, the other octave button selected turns off
8 replies
TroubleshootingMultiSlider Object Z bug [4.0.3 FIXED]
When a MultiSlider object is driven via script by another object its z attribute is "stuck".... Anyone else getting this? Here's my test template.... Sliders-Z-bug.jzml
5 replies
TroubleshootingAny news on the Bipolar-nonclassic skin editor crash?
Since version 4, and with the introduction of skins, it has been noted that using bipolar knobs in some skins causes the crashing of the editor in Windows. Any news on this getting fixed?
2 replies
TroubleshootingHelp creating conditional statement for a vector script.
Hi, I downloaded the Four track step sequencer and have been editing it for a project. http://liine.net/en/community/user-library/view/7/ In the sequencer the step expression is declared by a vector of sixteen values to move through the switches. I had an idea of making a knob that selects 8 different vectors to switch in realtime to make the sequencer move in different directions. Can anyone show me how the expression would work? Here are the eight different vectors that I want to use: 1. {12, …
0 replies
Troubleshooting