VCV
Re: VCV
since there are many logic and sequencer modules with switch input, I added 8 switches.
The following picture shows how this template can be used for a submixer. The top 4 buttons act as mute buttons, knob 8 as master volume. I find this basic setup useful for testing new modules.
And if these 8 buttons and 8 knobs are not enough, there are two additional identical pages or interfaces. Each one, obviously, uses one MIDI channel, so you can continue using Lemur port 0 for all three interfaces.
The following picture shows how this template can be used for a submixer. The top 4 buttons act as mute buttons, knob 8 as master volume. I find this basic setup useful for testing new modules.
And if these 8 buttons and 8 knobs are not enough, there are two additional identical pages or interfaces. Each one, obviously, uses one MIDI channel, so you can continue using Lemur port 0 for all three interfaces.
- Attachments
-
- VCV3.zip
- (21.67 KiB) Downloaded 184 times
Formant+Eurorack, PPG wave 2.2, Korg MS-20, etc., EWI 4000s, QuNeo, etc., Mixbus32c, u-he, MadronaLabs, Samplemodeling, NI, etc., iPad2/4/Pro