Joystick / D-Pad - Gamepad template
Posted: 12 Dec 2015 20:54
Hi,
Does anyone know if there is a joystick (D-Pad) template?
Explanation:
I use a lighting software and would like to use it to focus the lights. I created a modified TouchOSC layout and was wondering what else I could do with Lemur. I am interested in making a joystick (analogue D-Pad) and including a sequencer tab with tap sync BPM and wonder if the BPM tap sync can be updated from another app. I also wish that Lemur had Bluetooth gamepad hardware input. I'd like to mix gamepad input with OSC & MIDI to make a controller interface.
You can find my TouchOSC template here:
https://drive.google.com/folderview?id= ... sp=sharing
The Martin M-Series forum is here:
http://forum.martin.com/forum.asp?FORUM_ID=19
For fixture Pan and Tilt remote control I have two options for input. In this TouchOSC template I used both.
The MIDI signal is sent to the MIDI Bridge and then through MPCTools which translates the MIDI to M-PC commands. I used the MIDI to create relative faders so that touching anywhere along the fader adjusts the 0 to 127 value.
The OSC pan and tilt addresses are also separate. Each is a belt / knob control with range from 0 to 1. Let's say 0 decreases and 1 increases.
My understanding of a joystick / D-Pad is where there's a dead zone in the center and as it moves away from the center the value command of 0 or 1 is more rapidly sent. Closer to center would send the 0 or 1 less frequently and farther towards the edge more frequently.
I tried the RingAread for this, the closest I could find to a D-Pad, but I don't understand it. When released the values keep transmitting as it returns to center. Also, I don't see how to make an XY Pad. I'd like a relative XY Pad. I could make a relative fader in TouchOSC but I couldn't make a relative XY Pad. So I thought that maybe I could make a relative XY Pad in Lemur but I can't even find the XY Pad.
Best regards
Does anyone know if there is a joystick (D-Pad) template?
Explanation:
I use a lighting software and would like to use it to focus the lights. I created a modified TouchOSC layout and was wondering what else I could do with Lemur. I am interested in making a joystick (analogue D-Pad) and including a sequencer tab with tap sync BPM and wonder if the BPM tap sync can be updated from another app. I also wish that Lemur had Bluetooth gamepad hardware input. I'd like to mix gamepad input with OSC & MIDI to make a controller interface.
You can find my TouchOSC template here:
https://drive.google.com/folderview?id= ... sp=sharing
The Martin M-Series forum is here:
http://forum.martin.com/forum.asp?FORUM_ID=19
For fixture Pan and Tilt remote control I have two options for input. In this TouchOSC template I used both.
The MIDI signal is sent to the MIDI Bridge and then through MPCTools which translates the MIDI to M-PC commands. I used the MIDI to create relative faders so that touching anywhere along the fader adjusts the 0 to 127 value.
The OSC pan and tilt addresses are also separate. Each is a belt / knob control with range from 0 to 1. Let's say 0 decreases and 1 increases.
My understanding of a joystick / D-Pad is where there's a dead zone in the center and as it moves away from the center the value command of 0 or 1 is more rapidly sent. Closer to center would send the 0 or 1 less frequently and farther towards the edge more frequently.
I tried the RingAread for this, the closest I could find to a D-Pad, but I don't understand it. When released the values keep transmitting as it returns to center. Also, I don't see how to make an XY Pad. I'd like a relative XY Pad. I could make a relative fader in TouchOSC but I couldn't make a relative XY Pad. So I thought that maybe I could make a relative XY Pad in Lemur but I can't even find the XY Pad.
Best regards