Just trying To Connect
Posted: 10 Sep 2014 16:01
Hello
am hoping that some of you more knowledgeable members can help a brand new noobie, trying to get started.
Basics are Win7 64bit PC, Ableton 9.1.3, Lemur Editor 5.0.3, Lemur 5, Lemur Daemon 5.0.3 and LoopMIDI 1.0.5
Have setup AdHoc Network using the IP addresses given in the DesertSound tutorial recommended by Liine,
iPad has address of 192.168.4.60 and the PC Adhoc IP is 192.168.1.4, and it all seems to be OK. Both are Static addresses. They both to talk to one another via a USB Access point on the PC.
Now we get to the problems.
OSC In the tutorial it states to press the Play button top right on the Editor, it will give a popup box giving the IP Addresses and the iPads name. This does not happen with me, it does not show the iPad name but gives both the PC and iPads IP addresses. Is this correct?
It then goes on to say to ensure that in both the Lemur and OSC tab the IP addresses match those of the Static addresses.
In the Lemur tab it does but in the OSC tab it gives a table with an entry in the 1st slot which is different to either of the two previously mentioned IP addresses namely 192.168.1.4 with an entry under the port heading of 1. This address appears to be a DHCP address which varies depending on what else is on the network. What IP address should go in here?
There are other issues but I would like to get this sorted out before venturing any further.
Many thanks for reading this and hopefully coming up with an answer.
am hoping that some of you more knowledgeable members can help a brand new noobie, trying to get started.
Basics are Win7 64bit PC, Ableton 9.1.3, Lemur Editor 5.0.3, Lemur 5, Lemur Daemon 5.0.3 and LoopMIDI 1.0.5
Have setup AdHoc Network using the IP addresses given in the DesertSound tutorial recommended by Liine,
iPad has address of 192.168.4.60 and the PC Adhoc IP is 192.168.1.4, and it all seems to be OK. Both are Static addresses. They both to talk to one another via a USB Access point on the PC.
Now we get to the problems.
OSC In the tutorial it states to press the Play button top right on the Editor, it will give a popup box giving the IP Addresses and the iPads name. This does not happen with me, it does not show the iPad name but gives both the PC and iPads IP addresses. Is this correct?
It then goes on to say to ensure that in both the Lemur and OSC tab the IP addresses match those of the Static addresses.
In the Lemur tab it does but in the OSC tab it gives a table with an entry in the 1st slot which is different to either of the two previously mentioned IP addresses namely 192.168.1.4 with an entry under the port heading of 1. This address appears to be a DHCP address which varies depending on what else is on the network. What IP address should go in here?
There are other issues but I would like to get this sorted out before venturing any further.
Many thanks for reading this and hopefully coming up with an answer.