Resetting Logic Pro X Fader to zero

Discuss problems and solutions.
Post Reply
thejone
Newbie
Posts: 6
Joined: 24 Aug 2012 07:52

Resetting Logic Pro X Fader to zero

Post by thejone »

Hi there Lemur chaps.
I was wondering if anyone out there has had the issue where a button mysteriously sets the volume fader to zero on which ever track is hi lighted in Logic Pro X?
I have a button set to activate a screen set, but once it's pushed it immediately sets the volume fader to zero.
Would some one please be kind enough to have a look at my template and see if there's something there that I've missed?
I feel like I've looked through it a hundred times and can't seem to see where I'm going wrong.
If anyone can help I'd greatly appreciate it.
Many thanks in advance!
Attachments
Logic Automation Input Template.jzml
(30.87 KiB) Downloaded 76 times
Macciza
Regular
Posts: 1315
Joined: 07 Dec 2011 04:57
Location: Sydney, Australia.

Re: Resetting Logic Pro X Fader to zero

Post by Macciza »

Hi
2 options I can think of that are kind of related ...
1. You have that controller mapped to something via Controller Assignments . . .
2. Its CC7 or 10 or something and it is pre mapped by Logic to be Volume or Pan . . .
See https://forum.liine.net/viewtopic.php?f=32&t=4280

My vote is No.2
See the specs referenced in the above thread.
You are using default CCs and Logic is catching them
CC 7 is Volume , 10 is Pan, 1 is Modulation etc

Either pick better numbers or filter in the Environment maybe . .

MM
iMac 2.8G i7 12G 10.6.8/10.7.2, Legacy Dexter/Lemur, Liine Lemur/iPad2, KMI SoftStep, 12Step & QuNeo , B-Controls, Mackie C4 etc
MaxMSP, Live Suite, Native Instrument stuff, etc Modified Virtual Guitar System etc All Projects/Modules © CC-BY-NC-SA[*][/b]
thejone
Newbie
Posts: 6
Joined: 24 Aug 2012 07:52

Re: Resetting Logic Pro X Fader to zero

Post by thejone »

Thanks,
I had a feeling it was something like that.
I'll get in there and check it out.
Thanks for your help.
thejone
Newbie
Posts: 6
Joined: 24 Aug 2012 07:52

Re: Resetting Logic Pro X Fader to zero

Post by thejone »

Thankfully Logic has a setting where you can disengage these "inbuilt" CC values.
All is working well.
Thanks again for your help.
Attachments
Logic Pro X setting
Logic Pro X setting
Screen Shot 2014-05-29 at 9.44.11 am.png (55 KiB) Viewed 4735 times
thejone
Newbie
Posts: 6
Joined: 24 Aug 2012 07:52

Re: Resetting Logic Pro X Fader to zero

Post by thejone »

Oh and I finally clicked what you meant about program change numbers.
They are set and you have to use the numbers that aren't assigned to anything.
I'm a tad slow, but I get there in the end =)
Problem completely solved!
All the best
Post Reply