Page 1 of 1

Problem Ambivalent Beat :(

Posted: 11 Dec 2012 22:26
by benjth
Hello

As a lot of user I ve this problem of send / receive with Ambivalent Beat and my windows 7.

I ve the clock on the Ipad and the light pad run, but no send to Ableton ...

I ve you solution please ?


thanks a lot
( sorry for my english, im french )

Re: Problem Ambivalent Beat :(

Posted: 12 Dec 2012 01:30
by Macciza
Hi
Windows requires virtual MIDI drivers like MIDI Yoke or LoopBe to be setup properly - This is not necessary with Mac OS . . .
Do you have either of these on your system? Perhaps your MIDI is not set up properly.. . .
Sounds like you have input but your output is not working . ..
Send in details of your MIDI connections / setup - perhaps a fellow Win user can post theirs . . .

MM

Re: Problem Ambivalent Beat :(

Posted: 12 Dec 2012 05:48
by Phil999
regarding virtual MIDI ports in Windows, I had best experience with loopmidi. The other ones work as well, but loopmidi appears to be the best solution. Like rtpMIDI from the same programmer. Incredible that both programs are based on voluntary donations.

Regarding Lemur functionality, we need more information about the setup . . . c'est comme ça.

Re: Problem Ambivalent Beat :(

Posted: 12 Dec 2012 12:30
by benjth
hi

thanks for your help !

I ve already midi set up with Midi yoke .
All is already set up correctly , I can use the basic fader for example .. no problem, but Ambivalent not ok .

My setup : Windows 7, midi Yoke, Ipad , Ableton 8.2 ,

Re: Problem Ambivalent Beat :(

Posted: 12 Dec 2012 12:53
by benjth
I try with loopmidi : same result !

Basic fader send and receive ok, ambivalent beat NO !


its boring ......................

Re: Problem Ambivalent Beat :(

Posted: 12 Dec 2012 15:38
by Phil999
sorry if my post was kind of misleading. You can use any virtual MIDI port of course, but in the case of Ambivalent Beats which makes use of a Max patch, they aren't needed to make it work.

Ah, now I remember. I've struggled a bit with that as well, and I said the same thing, it's boring! :) There are two things to do which are important:

1. the M4L device must be on the left to the Drumrack, in the same MIDI channel
2. load samples into the lowest section of the Drumrack

Then it will work instantly.

Re: Problem Ambivalent Beat :(

Posted: 12 Dec 2012 18:09
by benjth
Thanks Phill999 for your help ..

I ve the same result, nothing . I ve the time code light run on the Ipad but no send midi.

I ve a question, why if I load a template , there s some fader who send and another no , it's a problem ?

Its this result on the " ambivalent 5 rack " load by an user, the fader on page 2 send midi , but another fader on the same page not send ?
its the same for the drum pad , he dont send midi and the fader on the page 2 send ! why ??

thanks for your help
( sorry for my english who are not really ok )

Re: Problem Ambivalent Beat :(

Posted: 12 Dec 2012 18:59
by Phil999
Max for Live doesn't use MIDI, it uses Open Sound Control (OSC).

1. create a new project in Ableton Live. You will see an audio track and a MIDI track. Delete the audio track
2. drop the Ambivalent Beats.amxd (the M4L device) in the field below the mixer ("Drop Audio Effects Here")
3. drop a Drumrack in the same field right next to the M4L device, and make sure there are samples in the lowest section of the Drumrack (that's probably the part that you are missing)

Image

In case it still doesn't work, you can also write a pm in French.

Re: Problem Ambivalent Beat :(

Posted: 12 Dec 2012 19:40
by benjth
Thanks Phil999 I will like it so simple... but nothing better ;)

I send you a french mail lol

thanks a lot !

I post a solution if I found one, sure !

Best

Re: Problem Ambivalent Beat :(

Posted: 14 Dec 2012 10:38
by Macciza
Hi Guys
I'd forgot about OSC - pretty sure the issue is that you do not have your OSC 0 target set.
Point it at your computer & port 8000 and you should be right.

Cheers
MM