XYPad
Posted: 25 Sep 2012 22:00
XYPad is a MIDI controller template for iPad Lemur.
Installation instructions ---> User Library: http://liine.net/en/community/user-library/view/307/
The template features 6 XY Pads
PADS 1-4 (Lemur MIDI 1)
Send midi CC data via XYZ parameters.
MIDI CC messages can be specified for XYZ parameters via the settings menu
Default on-load MIDI CC for XYZ [PAD1 21,22,23] [PAD2 25,26,27] [PAD3 29,30,31] [PAD4 32,33,34] To change settings select Settings, Midi target e.g Pad1 = P1, enter CC + OK
Additional functions include:
XYZ mute. By default Z is muted on-load
XY output range (via settings)
XY range lock (via settings). Range lock applies to all range parameters
XY invert (via settings)
PADS 5-6
Two large pads that act as master macro controllers for Pads 1-4. Pads 5 + 6 do not send any CC data
Additional functions include:
Assign XY parameters of pads 1-4 to follow Pad 5 + 6 XY via Macro menu table. When macro assignment is active, the buttons are coloured.
Touching Z on Pads 1-4 will reset macro control
TRANSPORT BAR (Lemur MIDI 0)
Uses Mackie Control protocol via MIDI 0 (Cubase)
Nav up, dwn, to left and right locator, stop, play, record, cycle
Access pads 1-6 and settings page
Credit to:
Massive thanks to Antonio Blanca, his templates are an invaluable resource on design and coding, and to all those helpful members at the Liine forum
The Settings page was derived from ABreakpoint2
The range function was derived from Kontrolab 2
XY style pad conversion of multiball by Antonio Blanca
http://liine.net/forum/viewtopic.php?f=28&t=778
Future Updates
Midi pick-up for macro controller (stop assigned XY jumping to Pad 5/6 position)
CC or Note on/off option for Z Pad 5+6
Fade on release with speed control for pads 5/6
CC assignment save
Installation instructions ---> User Library: http://liine.net/en/community/user-library/view/307/
The template features 6 XY Pads
PADS 1-4 (Lemur MIDI 1)
Send midi CC data via XYZ parameters.
MIDI CC messages can be specified for XYZ parameters via the settings menu
Default on-load MIDI CC for XYZ [PAD1 21,22,23] [PAD2 25,26,27] [PAD3 29,30,31] [PAD4 32,33,34] To change settings select Settings, Midi target e.g Pad1 = P1, enter CC + OK
Additional functions include:
XYZ mute. By default Z is muted on-load
XY output range (via settings)
XY range lock (via settings). Range lock applies to all range parameters
XY invert (via settings)
PADS 5-6
Two large pads that act as master macro controllers for Pads 1-4. Pads 5 + 6 do not send any CC data
Additional functions include:
Assign XY parameters of pads 1-4 to follow Pad 5 + 6 XY via Macro menu table. When macro assignment is active, the buttons are coloured.
Touching Z on Pads 1-4 will reset macro control
TRANSPORT BAR (Lemur MIDI 0)
Uses Mackie Control protocol via MIDI 0 (Cubase)
Nav up, dwn, to left and right locator, stop, play, record, cycle
Access pads 1-6 and settings page
Credit to:
Massive thanks to Antonio Blanca, his templates are an invaluable resource on design and coding, and to all those helpful members at the Liine forum
The Settings page was derived from ABreakpoint2
The range function was derived from Kontrolab 2
XY style pad conversion of multiball by Antonio Blanca
http://liine.net/forum/viewtopic.php?f=28&t=778
Future Updates
Midi pick-up for macro controller (stop assigned XY jumping to Pad 5/6 position)
CC or Note on/off option for Z Pad 5+6
Fade on release with speed control for pads 5/6
CC assignment save
- photo (1).PNG (59.52 KiB) Viewed 6966 times
- photo (2).PNG (72.13 KiB) Viewed 6966 times
