My first post-project.

Discuss Lemur and share techniques.
dj_eddie_gr
Newbie
Posts: 32
Joined: 17 Feb 2013 19:23

Re: My first post-project.

Post by dj_eddie_gr »

Softcore wrote:According to the screenshot you need RELATIVE endless knobs. Having an endless knob doesnt necesarilly mean its relative. Look into the user library for a relative endless knob - I think there is one already there.
If you're talking about this one ( http://liine.net/en/community/user-library/view/350/ ) ,I've already tried it with no luck.
Softcore
Regular
Posts: 1613
Joined: 04 Nov 2012 08:34

Re: My first post-project.

Post by Softcore »

Yeah try this one with all possible configurations on Traktor side (modes, direct/relative, adjust sensitivity etc etc) You definitely need relative thats for sure.

Although I dont think "Tempo Adjustment" is the equivalent to "platters" (or jogs). You are missing something. Tempo adjustment is the pitch fader and it should work with a plain fader/knob
Joe Soap
Regular
Posts: 462
Joined: 07 Jul 2012 15:04

Re: My first post-project.

Post by Joe Soap »

That would explain a lot - I presumed he meant tempo-adjustment as in jog or nudge.

If it's the std pitch / tempo then yeah.

Fasrk this, I don't have Traktor here to look at so wtf am I even doing here??? :mrgreen:
Softcore
Regular
Posts: 1613
Joined: 04 Nov 2012 08:34

Re: My first post-project.

Post by Softcore »

By the way the library endless knob above is in mode "7Fh / 01h" and this should give you some guidance. But again I think you are overcomplicating things - A pitchfader in Lemur and 2 buttons (pads) for bending would be all you'd need.

If of course you just want a "jog wheel" then you gotta find the correct thing to map inside Traktor - maybe search for "jog" or "scratch" mapping. Im not currently in the machine I have Traktor installed so Im just guessing.

P.S. Another thing to keep in mind is that, some 4-5 years ago, I tried to map a hardware controller's endless relative knobs to Traktor with no sucess - anything I did wasnt making Traktor respond correctly....Dunno though if this part has been changed - improved over the years. I was needing the relative knobs to deal with the navigation inside playlists but....no luck.
dj_eddie_gr
Newbie
Posts: 32
Joined: 17 Feb 2013 19:23

Re: My first post-project.

Post by dj_eddie_gr »

I don't want to do Bending with the rotary. I have buttons as you said for that. In any DJ controller I can map a Jod Dial in Traktor to act as a jog (of course...). Adding a modifier I can map the same CC (witch comes from a rotary -probably- encoder underneath), to act like a file selector in the browser.
Here are the midi notes that a Pioneer controller sends for the jogs. Can't understand anything... :p
dj_eddie_gr
Newbie
Posts: 32
Joined: 17 Feb 2013 19:23

Re: My first post-project.

Post by dj_eddie_gr »

Forgot to upload the image... :p
Attachments
Screen Shot 2013-03-01 at 5.49.22 PM.jpg
Screen Shot 2013-03-01 at 5.49.22 PM.jpg (221.93 KiB) Viewed 1322 times
Softcore
Regular
Posts: 1613
Joined: 04 Nov 2012 08:34

Re: My first post-project.

Post by Softcore »

This is a 14bit resolution, relative midi message sending.

edit to add: I think!!!
dj_eddie_gr
Newbie
Posts: 32
Joined: 17 Feb 2013 19:23

Re: My first post-project.

Post by dj_eddie_gr »

Can it be done in Lemur?
Softcore
Regular
Posts: 1613
Joined: 04 Nov 2012 08:34

Re: My first post-project.

Post by Softcore »

Just out of curiosity, if you use "pitch bend" message in Lemur midi mappings.....how does traktor respond to that?
dj_eddie_gr
Newbie
Posts: 32
Joined: 17 Feb 2013 19:23

Re: My first post-project.

Post by dj_eddie_gr »

Didn't work either. Can i do anything similar (for cueing up the song mostly ,the other stuff I'll figure out how to bypass them with other controls) with a multi fader or a gesture or something similar...?
Post Reply