lemur - auto-connection mac problem

Discuss problems and solutions.
monoaural
Newbie
Posts: 11
Joined: 02 Dec 2012 09:52

lemur - auto-connection mac problem

Post by monoaural »

probably one of the most asked question here. did some research here in the forum, but couldn´t find an answer.
i´m having problem to auto-connect my lemur running on ipad1 ios 5.1.1 to my mbp osx 10.6.8 lemur editor. in lemur editor on my mbp pressing LEMUR CONNECTION ( alt+c) won´t do anything, but typing-in the IP adress of my ipad manually works fine.

why is that?
how can i solve it?

it´s not really a problem to check my ipads IP and to type it in manually, but it´s pretty annoying...
Phil999
Regular
Posts: 919
Joined: 11 Jan 2012 01:53

Re: lemur - auto-connection mac problem

Post by Phil999 »

I had the same problem. What are the IP addresses and subnet masks of your iPad and Macbook?
Formant+Eurorack, PPG wave 2.2, Korg MS-20, etc., EWI 4000s, QuNeo, etc., Mixbus32c, u-he, MadronaLabs, Samplemodeling, NI, etc., iPad2/4/Pro
monoaural
Newbie
Posts: 11
Joined: 02 Dec 2012 09:52

Re: lemur - auto-connection mac problem

Post by monoaural »

ipad 169.254.120.86
255.255.0.0

mbp
169.254.4.209:5004
255.255.255.0
Phil999
Regular
Posts: 919
Joined: 11 Jan 2012 01:53

Re: lemur - auto-connection mac problem

Post by Phil999 »

try with 169.254.4.86 on the iPad. I almost bet it will 'auto-connect' to the editor after that change.
Formant+Eurorack, PPG wave 2.2, Korg MS-20, etc., EWI 4000s, QuNeo, etc., Mixbus32c, u-he, MadronaLabs, Samplemodeling, NI, etc., iPad2/4/Pro
monoaural
Newbie
Posts: 11
Joined: 02 Dec 2012 09:52

Re: lemur - auto-connection mac problem

Post by monoaural »

just gave it a try. changed my iPad ip to static 169.254.4.86 My iPad just don´t wont appear on my lemur editors connection window. mmhhh.. strange..
Phil999
Regular
Posts: 919
Joined: 11 Jan 2012 01:53

Re: lemur - auto-connection mac problem

Post by Phil999 »

sorry to hear. But that does not mean the settings are wrong. I would now follow the Apple troubleshooting guide for iPad-not-recognised-in-iTunes: reset network settings on the iPad, reboot Macbook, etc. Maybe it is just that. Good luck!

Edit: wait, I've just overseen something that might be important (in my experience it was even crucial): set your subnet mask to 255.255.255.0 on the iPad. It must work after that change!!
Last edited by Phil999 on 10 Dec 2012 05:40, edited 1 time in total.
Formant+Eurorack, PPG wave 2.2, Korg MS-20, etc., EWI 4000s, QuNeo, etc., Mixbus32c, u-he, MadronaLabs, Samplemodeling, NI, etc., iPad2/4/Pro
monoaural
Newbie
Posts: 11
Joined: 02 Dec 2012 09:52

Re: lemur - auto-connection mac problem

Post by monoaural »

edit:
ipad auto-connectes like a charm to my lemur daemon while using 255.255.0.0
instead when using 255.255.255.0 not even in daemon the iPad is auto-detected

anyways, phil999, thanks a ton for your help.
first post here. nice to met you!
Last edited by monoaural on 10 Dec 2012 05:46, edited 1 time in total.
Phil999
Regular
Posts: 919
Joined: 11 Jan 2012 01:53

Re: lemur - auto-connection mac problem

Post by Phil999 »

bump, see my last post. We edited at the same time.
Formant+Eurorack, PPG wave 2.2, Korg MS-20, etc., EWI 4000s, QuNeo, etc., Mixbus32c, u-he, MadronaLabs, Samplemodeling, NI, etc., iPad2/4/Pro
monoaural
Newbie
Posts: 11
Joined: 02 Dec 2012 09:52

Re: lemur - auto-connection mac problem

Post by monoaural »

succes!

incredible. i really don´t know what i did different this time. just kept on trying and trying and i works now.

ip 169.254.4.86
sub 255.255.0.0

couldn´t do that without your help.
thanks man.
Phil999
Regular
Posts: 919
Joined: 11 Jan 2012 01:53

Re: lemur - auto-connection mac problem

Post by Phil999 »

glad it works now. And thank you for the feedback, it seems the subnet mask is not relevant in the end? Interesting . . .

But I also get the impression even a correct setting can fail after the first change. One has to reboot one side of the connection or both, or reset and enter the same numbers again. Which makes troubleshooting very difficult. One really has to know how networks are functioning, and be sure of what one is doing. I'm not, but countless hours of trial and error finally also lead to the goal.

Another thing which comes to my mind: with iOS 5 I used subnet 255.255.0.0, with iOS I must use 255.255.255.0. Maybe this explains the situation.
Formant+Eurorack, PPG wave 2.2, Korg MS-20, etc., EWI 4000s, QuNeo, etc., Mixbus32c, u-he, MadronaLabs, Samplemodeling, NI, etc., iPad2/4/Pro
Post Reply