What is the best iPad configuration for an adhoc setup?
Is one better than the other DHCP or Static? Off, Manual, Automatic)
Perhaps an image/s would clarify any possible uncertainty.
Cheers,
PC user with iPad 1 and a DWA-140 D-Link
iPad DHCP or Static
Re: iPad DHCP or Static
static IP addresses have some advantages I think.
Formant+Eurorack, PPG wave 2.2, Korg MS-20, etc., EWI 4000s, QuNeo, etc., Mixbus32c, u-he, MadronaLabs, Samplemodeling, NI, etc., iPad2/4/Pro
Re: iPad DHCP or Static
In general I would say to go with DHCP but it does require that everything is set up properly too, and I am on Mac . .
Going with static is perfectly fine and has advantages sometimes to fit a piece in with an existing network as well.
Either way the main thing is knowing how to setup and verify that it is actually working.
Cheers
MM
Going with static is perfectly fine and has advantages sometimes to fit a piece in with an existing network as well.
Either way the main thing is knowing how to setup and verify that it is actually working.
Cheers
MM
iMac 2.8G i7 12G 10.6.8/10.7.2, Legacy Dexter/Lemur, Liine Lemur/iPad2, KMI SoftStep, 12Step & QuNeo , B-Controls, Mackie C4 etc
MaxMSP, Live Suite, Native Instrument stuff, etc Modified Virtual Guitar System etc All Projects/Modules © CC-BY-NC-SA[*][/b]
MaxMSP, Live Suite, Native Instrument stuff, etc Modified Virtual Guitar System etc All Projects/Modules © CC-BY-NC-SA[*][/b]
Re: iPad DHCP or Static
Thanks for the input.
I should have included running Lemur over multiple computers?
I will look for that topic or create one.
Cheers
MM69
I should have included running Lemur over multiple computers?
I will look for that topic or create one.
Cheers
MM69