xml for cubase 6

Discuss Lemur and share techniques.
Phil999
Regular
Posts: 919
Joined: 11 Jan 2012 01:53

Re: xml for cubase 6

Post by Phil999 »

gstew wrote:I'll try adding the quick control but I'll have to do that with each track I use right?
yes. That is why I rarely use Quickcontrol. It does what it says, it is handy to quickly setup a few controllers for one plugin. In the Generic Remote I find it better to control the plugins directly. And Quickcontrol can have its own xml in the Device Setup. The author of this CC121 template probably wanted to make the entire setup easier and used only one xml instead of two.
Formant+Eurorack, PPG wave 2.2, Korg MS-20, etc., EWI 4000s, QuNeo, etc., Mixbus32c, u-he, MadronaLabs, Samplemodeling, NI, etc., iPad2/4/Pro
gstew
Newbie
Posts: 18
Joined: 02 Sep 2012 20:39

Re: xml for cubase 6

Post by gstew »

hey,

so I have a basic template set up with a multi ball x and y axis and a fader. X is set to CC1 and y to CC11 and the fader is set to CC7. I used the learn function in Generic Remote to set the address' for fader 1,2 and 3.
in the 2nd large box underneath I have fader 1,2 and 3 but don't know what to select under Device or Channel or Value, there's a lot of options and can;t seem to get the right combination. Is it a command or a VST mixer ,can;t figure it out.

thanks,

G
Attachments
thurs gen dev.PNG
thurs gen dev.PNG (97.21 KiB) Viewed 2109 times
whatisvalis
Regular
Posts: 153
Joined: 31 Dec 2011 17:12

Re: xml for cubase 6

Post by whatisvalis »

What exactly are you trying to control? Just modulation and volume?

Setting-up a generic remote is only needed if you want to assign controls to specific functions within Cubase
gstew
Newbie
Posts: 18
Joined: 02 Sep 2012 20:39

Re: xml for cubase 6

Post by gstew »

hi,

I want to use it with EWQL Hollywood strings to control the expressioncc11,(which is dynamics) and mod wheel cc1 (which is vibrato depending on the patch), I wanted to have all this on the xy axis of the multil bass and then on a separate fader have the track volume cc7. I'd use all the other stuff on the cc121 template,it looks great but the main reason I got it was to work with strings etc...and the multi ball approach looks perfect for cc11+cc1.

thnx
G
Phil999
Regular
Posts: 919
Joined: 11 Jan 2012 01:53

Re: xml for cubase 6

Post by Phil999 »

do you have EWQL Hollywood strings loaded in your VSTinstruments window?
Formant+Eurorack, PPG wave 2.2, Korg MS-20, etc., EWI 4000s, QuNeo, etc., Mixbus32c, u-he, MadronaLabs, Samplemodeling, NI, etc., iPad2/4/Pro
gstew
Newbie
Posts: 18
Joined: 02 Sep 2012 20:39

Re: xml for cubase 6

Post by gstew »

ya,I have an instrument loaded. I see the orange indicator in the transport reacting when I move the multi ball but it has no effect on cc11 or cc1.
Phil999
Regular
Posts: 919
Joined: 11 Jan 2012 01:53

Re: xml for cubase 6

Post by Phil999 »

when it's loaded, you can make the assignment in the lower part of the Generic Remote. You can also find instructions in the Cubase manual.
Formant+Eurorack, PPG wave 2.2, Korg MS-20, etc., EWI 4000s, QuNeo, etc., Mixbus32c, u-he, MadronaLabs, Samplemodeling, NI, etc., iPad2/4/Pro
gstew
Newbie
Posts: 18
Joined: 02 Sep 2012 20:39

Re: xml for cubase 6

Post by gstew »

hi,
so what do I load it as under device ? and then what do I put under channel and value? I've gone over the Cubase manual a million times and can;t figure it out.

thanks,
G
whatisvalis
Regular
Posts: 153
Joined: 31 Dec 2011 17:12

Re: xml for cubase 6

Post by whatisvalis »

If you have the vst instrument loaded then it will appear as an option in the Devices column of the generic remote, 2nd window. You can select it and give the desired targets the CCs you want etc.
Phil999
Regular
Posts: 919
Joined: 11 Jan 2012 01:53

Re: xml for cubase 6

Post by Phil999 »

exactly.

But I feel for you, it can be confusing. But be assured, once you get a hang of it, it won't be difficult anymore. The Generetic Remote Device is terribly outdated, but in fact still a very powerful tool to control anything you want in your DAW. It can handle 'normal' MIDI and high resolution MIDI bi-directionally. This is, even in 2012, not very common.
Formant+Eurorack, PPG wave 2.2, Korg MS-20, etc., EWI 4000s, QuNeo, etc., Mixbus32c, u-he, MadronaLabs, Samplemodeling, NI, etc., iPad2/4/Pro
Post Reply