Menu component bug

Discuss problems and solutions.
Post Reply
gbevin
Newbie
Posts: 7
Joined: 06 May 2012 18:31
Location: Belgium
Contact:

Menu component bug

Post by gbevin »

Hi,

I stumbled into a bug with the Menu component. If I create one with 24 options and enable Scale Output, the option with index 14 can't be selected (named 'Option 15' in my attachment). The x value is sent out correctly, but it always snaps back to index 13. The same happens with incoming OSC data, the value of index 14 always shows index 13. Here's an exported Menu in attachement that does just that.
menubug.jzlib
(786 Bytes) Downloaded 113 times
Does this happen for anyone else?

Thanks,

Geert
iMac Core i7 2.93 GHz 8GB SSD 10.7.x, Liine Lemur iPad1/iPad 3, Eigenharp Alpha, Metric Halo, Plogue Bidule, PianoTeq, Omnisphere, u-he Diva, NI Komplete 8, Moog Slim Phatty
Macciza
Regular
Posts: 1315
Joined: 07 Dec 2011 04:57
Location: Sydney, Australia.

Re: Menu component bug

Post by Macciza »

Hi Geert
Yes I can confirm something is weird when Scale values is enabled. You can always do any scaling yourself if needed.
I will raise the matter with Liine support.
Cheers
MM
iMac 2.8G i7 12G 10.6.8/10.7.2, Legacy Dexter/Lemur, Liine Lemur/iPad2, KMI SoftStep, 12Step & QuNeo , B-Controls, Mackie C4 etc
MaxMSP, Live Suite, Native Instrument stuff, etc Modified Virtual Guitar System etc All Projects/Modules © CC-BY-NC-SA[*][/b]
gbevin
Newbie
Posts: 7
Joined: 06 May 2012 18:31
Location: Belgium
Contact:

Re: Menu component bug

Post by gbevin »

Thanks a lot MM, I'll have a look at doing the scaling myself, had been considering that.
iMac Core i7 2.93 GHz 8GB SSD 10.7.x, Liine Lemur iPad1/iPad 3, Eigenharp Alpha, Metric Halo, Plogue Bidule, PianoTeq, Omnisphere, u-he Diva, NI Komplete 8, Moog Slim Phatty
gbevin
Newbie
Posts: 7
Joined: 06 May 2012 18:31
Location: Belgium
Contact:

Re: Menu component bug

Post by gbevin »

I implement the scaling myself and this bug seems to actually be a Menu component bug itself. When I set the selection to float values, it misbehaves as explained above. When I however round the values to make them integers and set the selection those, the Menu component works fine. I suspect that that's what also happening when the built-in scaling is in use.
iMac Core i7 2.93 GHz 8GB SSD 10.7.x, Liine Lemur iPad1/iPad 3, Eigenharp Alpha, Metric Halo, Plogue Bidule, PianoTeq, Omnisphere, u-he Diva, NI Komplete 8, Moog Slim Phatty
M-Prod
Newbie
Posts: 9
Joined: 22 Apr 2012 19:55

Re: Menu component bug

Post by M-Prod »

Ran into the same menu bug. A fix would be appreciated
nick_liine
Liine Staff
Posts: 285
Joined: 01 Oct 2010 11:06

Re: Menu component bug

Post by nick_liine »

Bug confirmed, thanks.

N
Post Reply