mlrv 2
Re: mlrv 2
Hi
Are you using the Monemur v3 maxpatch? it is in the monemurV3 package in the library
It allows you to set the Lemur ip and monome prefix . . .
Once you are sending /mlr as the root address it should work following standard mlrV instructions . . .
Make sure you have the OSC port set correctly in mlrV and that it is not already in use.
Got it up and running this morning without too much difficulty.
Could be good to do up a Lemur specific version that can show the top row commands
Cheers
MM
Are you using the Monemur v3 maxpatch? it is in the monemurV3 package in the library
It allows you to set the Lemur ip and monome prefix . . .
Once you are sending /mlr as the root address it should work following standard mlrV instructions . . .
Make sure you have the OSC port set correctly in mlrV and that it is not already in use.
Got it up and running this morning without too much difficulty.
Could be good to do up a Lemur specific version that can show the top row commands
Cheers
MM
iMac 2.8G i7 12G 10.6.8/10.7.2, Legacy Dexter/Lemur, Liine Lemur/iPad2, KMI SoftStep, 12Step & QuNeo , B-Controls, Mackie C4 etc
MaxMSP, Live Suite, Native Instrument stuff, etc Modified Virtual Guitar System etc All Projects/Modules © CC-BY-NC-SA[*][/b]
MaxMSP, Live Suite, Native Instrument stuff, etc Modified Virtual Guitar System etc All Projects/Modules © CC-BY-NC-SA[*][/b]