Project
VCV
Started by Phil999 on .
Sign in or create an account to join the conversation.
this is just a simple controller for VCV with 8 MIDI CC's.
[img]https://i.imgur.com/FYjq7G9.png[/img]
VCV.zip
[img]https://i.imgur.com/FYjq7G9.png[/img]
VCV.zip
since there are many logic and sequencer modules with switch input, I added 8 switches.
[img]https://i.imgur.com/RtrUtEc.png[/img]
The following picture shows how this template can be used for a submixer. The top 4 buttons act as mute buttons, knob 8 as master volume. I find this basic setup useful for testing new modules.
[img]https://i.imgur.com/l1BASP6.png[/img]
And if these 8 buttons and 8 knobs are not enough, there are two additional identical pages or interfaces. Each one, obviously, uses one MIDI channel, so you can continue using Lemur port 0 for all three interfaces.
VCV3.zip
[img]https://i.imgur.com/RtrUtEc.png[/img]
The following picture shows how this template can be used for a submixer. The top 4 buttons act as mute buttons, knob 8 as master volume. I find this basic setup useful for testing new modules.
[img]https://i.imgur.com/l1BASP6.png[/img]
And if these 8 buttons and 8 knobs are not enough, there are two additional identical pages or interfaces. Each one, obviously, uses one MIDI channel, so you can continue using Lemur port 0 for all three interfaces.
VCV3.zip