General

Get help, share ideas, and discuss all things Lemur

Sign in or create an account to join the conversation.

Topics

port for auto detecting iPad/Midi Targets

Hi, I'm looking for which ports are used for midi and which protocol they use. And also which ports are used for detecting Lemur's on the network. Thanks, Anton

Started by Anton on

1 reply

Updated

Troubleshooting

Ableton to iPad MIDI issues

Hello, I believe there is a MIDI issue with 3.2 I have 2 ipads setup the exact same way, using the same daemon for input, and the SAME template loaded on both iPads, with exact SAME configuration for connection (ad hoc network connecting directly to the computer local daemon) For instance, I have one Lemur fader assigned to a Ableton volume channel. If I move the fader on the computer with the mouse, then : - the iPad with Lemur 3.1 moves - the iPad with Lemur 3.2 doesnt move Anyone else having …

Started by Tao-Nhan on

1 reply

Updated

Troubleshooting

Multiball question

Bonjour I can easily activate/desactivate the physics of a Multiball with a custom button. Is it possible to do this for each ball separately ?

Started by nitefish on

2 replies

Updated

Troubleshooting

Script executed on interface change?

Is there a way to execute a script when taping on an interface? I have a tabbed container on an interface and i want to go directly to 1 tab each time i go to that interface instead of staying on the last tab selected. Is there a way to do so?

Started by matino on

8 replies

Updated

Troubleshooting

Change interface with button (should be simple)

The manual states @Page 30: The individual interfaces may be selected by tapping the appropriate tab, programmatically via the selectinterface(index) built-in function or via OSC commands. I want to create a switch anywhere in my project that switches to interface 9, (name in my project: 9.QB) so I tried: Create a button anywhere in my project (9 interface pages), behaviour:pad create a script for this button, call it :action" on expression "x" then i tried various entries, none of them work: (a…

Started by jbgeluid on

3 replies

Updated

Troubleshooting

install fail & fail again .. bored.

got lemur ipad for 2 weeks still can't get anything out of it. so here is what i'm doing if anyone could see what i'm diong wrnog: i installed on my pc loopMIDI & lemur daemon i donwloaded this template for cubase. this 16channels template says : MIDI 0 = Generic Remote - cubase lemur Control MIDI 0 = Mackie Controller (LEFT) MIDI 1 = Mackie controller (RIGHT) i open lemur editor and sync the 16 channel template. i can see it on ipad. lemur is set this way : MIDI0 from loopMIDI port / to loopMID…

Started by sylvainmoreau on

5 replies

Updated

Troubleshooting

SL-M1 not showing parameters

Hi, I am using the latest Lemur on ipad3 with ios6. I am using Maschine 1.8.1 and the SL-M1 template. In general it works very well, I can assign my macro controls to the SL-M1 controls. The only thing which is not working is that SL-M1 does not show the parameters the control is assigned to. Isn't it supposed to do this if I assign a macro to a parameter? In any case, the template is very useful for us Maschine Mikro users who do not have the extra display and controllers of the full maschine. …

Started by nakedcellist on

2 replies

Updated

Troubleshooting

Issues with keystroke messages

Hi, I am having a problem where I have a full alphanumeric keyboard in lemur which works perfectly with my PC for any application except for the one in which it was intended for. I have added it to my template for use with Traktor software so that I can search my tracks. Basically the lemur keyboard works great for everything (I wrote this post with it) and works fine in notepad etc. but in the search field in traktor I might only get one letter out of 10. I have since created a new very simple …

Started by MitchAnderson on

0 replies

Updated

Troubleshooting

Lemur over Multiple computers using Midi / OSC

From reading the manual it would appear that from one project you can control not only various midi CC's/OSC but also control them on different computers. So with one Lemur, on one screen, using an adhoc connection, you could change the volume of something in your DAW using midi CC and the fader beside it could change the lighting of something in Arkaos using OSC. I would love to know how to set that up. PC user please include some images or confusion and frustration might set in. Cheers, MM69

Started by Melmac69 on

1 reply

Updated

Troubleshooting

daemon crash !!

H!, when I try to connect my lemur the daemon quit !!! I use a macbook pro os 10.6.8. I must use my old jazz daemon whith liine lemur.

Started by studioda on

2 replies

Updated

Troubleshooting

Need help for multicolor pads with velocity return messages

hello friends I need your help, what expression should I write for that return messages velocity change the colors of the pads according to this table: 000-000: OFF 001-003: White 004-007: Cyan 008-015: Magenta 016-031: Red 032-063: Blue 064-126: Yellow 127-127: Green I hope your help to complete my project and share with the community

Started by xone4dj on

4 replies

Updated

Troubleshooting

MIDI assignments not showing up in MIDI Map window?

Hi all, I just bought Lemur for iPad yesterday and have embarked upon what is obviously going to be a significant learning curve. Right now I'm just kind of going through the manual and getting a feel for everything. I've started by trying to create a template for FM8. I've successfully mapped a number of parameters, but when I open the "MIDI Map" window (Alt+M), none of the mappings are showing up. What am I doing wrong? Thanks :)

Started by ishaan on

1 reply

Updated

Troubleshooting

maschine SL M1 connection problem

I have bought Lemur. I can learn midi with different projects, like basic fader. But If I open the SL M1 template, nothing happens in Maschine. I have seen some post of someone who said, "you need target midi input output to 2" I tried, but with no result. I hope someone can help me

Started by louterwouter on

1 reply

Updated

Troubleshooting

ABreakpont 2 as an module/interface (mu)

Has anyone successfully made an AB breakpoint (or esowave) module/interface for mu (or anything else)? I tried to export from the jzml and the sequencer wouldn't work. I contacted AB and he said it was because of extra scripts. He suggested i tried it with the x3 version (the sequencer was active (movement), yet still no sounds). This is over my head and figured somebody has tried to do this (and succeeded) any help would be awesome. Thanks, Gg

Started by Gg wheeler on

1 reply

Updated

Troubleshooting

iPad DHCP or Static

What is the best iPad configuration for an adhoc setup? Is one better than the other DHCP or Static? Off, Manual, Automatic) Perhaps an image/s would clarify any possible uncertainty. Cheers, PC user with iPad 1 and a DWA-140 D-Link

Started by Melmac69 on

3 replies

Updated

Troubleshooting

unable to change template midi channel

HI, i have been trying to change a template (microkorg) midi channel to match my synth, but so far lemur only responds to midi channel 1 i have changed all the defaults in the template from midi 1 over to midi 2, and have had no success. (i have changed the global on the synth to two to match when testing) and also defaulted lemure midi targets to midi two. seems im missing somthing Can someone please guide me how they might do this. i have searched the forums but have found nothing. Thanks

Started by Aware on

4 replies

Updated

Troubleshooting

Menu component bug

Hi, I stumbled into a bug with the Menu component. If I create one with 24 options and enable Scale Output, the option with index 14 can't be selected (named 'Option 15' in my attachment). The x value is sent out correctly, but it always snaps back to index 13. The same happens with incoming OSC data, the value of index 14 always shows index 13. Here's an exported Menu in attachement that does just that. menubug.jzlib Does this happen for anyone else? Thanks, Geert

Started by gbevin on

5 replies

Updated

Troubleshooting

Cannot get Lemur + iConnectMIDI + PC Win 7 x64 to work?!

Hello all, Sorry if this is banal but I haven't found it in my inquiries so far... Let me first specify that I WANT a WIRED MIDI connection to take advantage of iConnectMIDI's lightning speed. With that said on my Mac, I'm presuming that is due to coreMIDI, I don't even need the daemon running and setting the ports in Lemur for D1 USB and D2 USB as From and To respectively, open up Abelton Live and BOOM, works flawlessly and crazy fast. This is wired mind you, not interested in wireless as in th…

Started by bennydlyte on

4 replies

Updated

Troubleshooting

Lemur cubase 6.5 win 7

hi, I've been trying for a day or so to get this working but have had no luck yet. I'm using loopbe30,I have 2 midi ports set up, ipad is connecting to Lemur editor and Daemon. I just can;t figure out the routing(I think that;s the problem). I have I have on my iPad: MIDI targets MIDI 1 from: PC:01 Internal midi To: PC:01. Internal Midi I added a generic remote and imported the CC121 xml I downloaded from the Liine library. I set 01 Internal MIDI- midi input 01 Internal Midi -midi output and get…

Started by gstew on

9 replies

Updated

Troubleshooting

Backspace Key is Deleting Objects????

If I duplicate or copy/paste an object and position the cursor to rename the new object, when I hit the backspace key, 5 out of ten times it deletes the entire object. Any one else seeing this behavior?

Started by ForestCat on

1 reply

Updated

Troubleshooting

Midi Problems

So for some reason, when I go to setup the connections in Lemur Daemon nothing shows up. I'm not sure what's going on, I've scoured the internet for help and was able to find nothing. I'm running the Lemur Editor and Lemur Daemon on windows 7 if that makes a difference. Any help would be appreciated :D

Started by gmd1995 on

3 replies

Updated

Troubleshooting

Daemon wifi issues

Hi everybody, did anybody had wifi problems with Daemon ? I choosed Daemon to connect my 8 ipads to my macbook with an airport express network. I thought that Daemon would be the best midi network for Lemur. I don't know if building the wifi network with airport express is really better than the macbook integrated airport . But after two or three days of work, i experienced some daemon ports crashes on some ipads. did anybody experienced such problems ? What could be the most stable midi by wifi…

Started by Audiorama on

17 replies

Updated

Troubleshooting

connection drop?

I've been practicing a live PA for a few hours today and twice I noticed that the connection from the lemur dropped. I'm using a wifi signal generated from my laptop to connect and NOT going through a router. What's strange is that when I go back to the main menu, I can see that MIDI A is red instead of black. If I select it it turns black again and the connection resumes (without stopping the DAW). Any idea why this might be happening and how I can prevent it? thanks!

Started by biologik on

14 replies

Updated

Troubleshooting

i can't assign macro in maschine with SL-M1

Hello, i can't assign macro in maschine with SL-M1. my iPad i connected to maschine in daemon out 0 and it work fine with some other lemur projects. thanks for help

Started by jemamuse on

2 replies

Updated

Troubleshooting

lost.. don't know were to go from here......

there is a problem that I can't understand what is the meaning of these words on the forevernowf1le.....: In order to be able to calculate the correct x/y coordinates, the template needs to know your screen resolution and how you have configured your Traktor layout. Use the UIConfig tab to tell the Lemur template about your configuration: Open the UIConfig tab of the Lemur template on your iPad. Use the buttons on the left side to tell the template which of the UI elements are enabled/disabled i…

Started by shmilystam on

0 replies

Updated

Troubleshooting

Some teething questions

I've succcessfully used Lemur to send info back to Max with no problems via OSC. I now want to be able to send stuff from Max to Lemur. I've done a couple of trivial tests to turn on or off an LED so I know I'm able to send OSC packets from Max to the Lemur on my iPad I've run into two issues 1) I can't figure out how to make the LED object bigger --- it's really tiny. I want to have 4 LEDs that I can flash in time to a beat. 2) I tried using the Custom Button as an alternative but the Lemur edi…

Started by dhjdhj on

4 replies

Updated

Troubleshooting

Variable not sent via OSC

Hi guys! Having a trouble here: Lemur is not sending variable defined inside the script through OSC to Ableton Live. I've defined "b" variable in "Quant_switch" Object: http://s9.postimage.org/asz6wtvv3/Screen_shot_2012_07_13_at_9_06_29_PM.png And I have a "Quant" script which defines the position of active switch (defines position of first non-null value) and assigns 1,2,4 or 0 to "b" variable http://s9.postimage.org/9pf2kvb7z/Screen_shot_2012_07_13_at_9_06_51_PM.png But after assigning "b" var…

Started by Romang on

8 replies

Updated

Troubleshooting

Midi to Lemur / Midi syncro stopped working

Hello, I have recently upgraded to 3.2 and I notice that the iPad Lemur is not receiving MIDI information anymore. I am normally connecting the Macbook pro 10.6 with a ad hoc connection, but I have also tried the same test with a physical MIDI interface (Kenton USB MIDI) A simple test : 1) Create a volume fader in the editor, activate "Lemur Connection" and "Lemur Syncro" 2) Move the fader value on the Lemur screen -> the fader move on the Lemur editor 3) Move the fader value on the Lemur editor…

Started by Tao-Nhan on

5 replies

Updated

Troubleshooting

Missing fader behaviour ?

Hallo, i would like the fader behave relatively, like the ones in TouchOSC, i mean, if the fader is at 0, and i put my finger at half, the fader should not move, it should start moving when i start moving the finger, relatively, this is much more safer when using live as to change a fader position you don't have just to put the finger on the fader, but you have to move it also. Honestly like this faders are quite pointless to me. I see Knobs for example works as i like when are set to "linear", …

Started by rfmusic on

4 replies

Updated

Troubleshooting

M-Audio interface corrupts MIDI-server after using Lemur?

Dear people, I hope you can help me out on this one. I recently purchased the Liine Lemur-app for my iPad. For CoreMIDI connection I use a combo of the Neusonik iM/One interface with a M-Audio Midisport Uno. I have a MacBook Pro 15'' 2Ghz Intel Core i7 running Mac OS X Lion 10.7.4. It's been working smoothly with my software (Live, Logic, Max) and my studio interface (TC Electronic Studio Konnekt 48) up until today when I connected my computer to my live audio interface, an M-Audio 410. Now, I s…

Started by anders_bach on

0 replies

Updated

Troubleshooting

New to scripting : issue with assigning midi in ableton

Hi- I'm new. :mrgreen: I created faders in my template and want them to control the channel faders in ableton. When I use the "midi learn" command and touch the fader on the lemur it registers in ableton as cc1 which is turning the fader on and off. What am I doing wrong? Thank you

Started by digitalninja on

2 replies

Updated

Troubleshooting

Can anyone solve this?

Hi there, I created two multisliders and one button. The value from of the two multislders comes from pure data. I want lemur to do this: When i push the button(ON) the first multislider need to have the same value as the second multislider. When i push again the button(OFF) the multisliders don't need to be linked anymore. I think this is really easy for an expeirenced lemur programmer but for me it's really difficult. Can anyone help me with this. It's really important for me. Jasper

Started by jasp on

1 reply

Updated

Troubleshooting

Daemon not picking up iPad 2

I have an adhoc connection setup between my Mac and iPad, Daemon is running but when I load the iPad app it isn't picking it up. What next?

Started by MUSing on

0 replies

Updated

Troubleshooting

LemurEditor 3.2 bug

Two things, 1) Lemur often crashes while working with text on Windows 7 64 bit. 2) When trying to make a container tabbed with objects already in the container, the editor makes sometimes dozens of copied objects and tabs. If a save has not previously been done these have to be manually deleted one by one from the project panel. Using the undo feature does not undo.

Started by shimoda on

2 replies

Updated

Troubleshooting

bug ??? on pads

hi from max/msp when i sent a list message ( 0 0 0 0 0 0 )/ (1 1 1 1 1 1 ) of six element with argument "freeze" or "color" + osc address on a pad with 6 columns, the list is decay to 1 element on pads : the first element of the list is the 2nd pad, the 2nd element of the list is the third pad,.... is there a bug ? or not ? thanks f freeze.tiff

Started by oran-outan on

11 replies

Updated

Troubleshooting

M4L DEVICE CONTROLLER crashing live

The subject mentioned module keeps crashing with live. I have set it up using LiveOSC. I know it is able to detect the device that I currently have in focus as the module on my tempelate will update accordingly with device name etc. I can also see Live receiving information from the Lemur app as it will reflect the changes I make, but most of the time after about a second it will just crash. If I move a parameter in the selected device directly in Live first and then use the Lemur app it seems t…

Started by tobpA on

6 replies

Updated

Troubleshooting

Midi issues

I don't use the Lemur Daemon. It doesn't like some other things I use so I've been using the standard Session 1 midi settings. The world is good.... Load the new Lemur version (ignoring all the wonderful font issues) and start setting everything up. In Lemur in Setup on the iPad for MIDI 0 I use From: MyiPad : Session 1 To: HUH?????????? What happened to MyiMac:Session 1? NOT there anymore. OK, just for jollies I restart everything and let the Daemon start up this time. Under the Daemon I use Se…

Started by joebataz on

7 replies

Updated

Troubleshooting

Menu weirdness on save

Hey everybody - This question is loosely related to another topic I posted about knobs, and being unable to save their default value of 0 without writing On Load code to instantiate it: http://liine.net/forum/viewtopic.php?f=24&t=1482 I now have a problem with the Menu object, specifically when the "scale object" option is selected. If I select a Menu value and save it into the interface, it sometimes, upon re-open, reverts to the value just before it. I.e. in the small attachment below, if I sa…

Started by drewboles on

0 replies

Updated

Troubleshooting