General

Get help, share ideas, and discuss all things Lemur

Sign in or create an account to join the conversation.

Topics

Templates always output on channel 1, midi selector help..

Hi, I'm using the default keyboard template and a few from the community, but I can't get them to output on another channel. They always trigger channel 1 like they are in omni mode or something. What would be perfect is to build in a midi channel selector into the module to choose the output channel. I have a little coding from the past and I am starting to look at scripts but it is a bit overwhelming at first. I am making a front end for various iPad synth apps and want to control different sy…

Started by KlaatuNinja on

1 reply

Updated

Troubleshooting

MIDI Slowdown

Hey folks! Haven't been around much because I've been working a lot and doing some courses on the side. I've run into another issue which I'm trying to track down. Don't think it's Lemur but not sure. After running for about 15 minutes the MIDI response time from the iPad to the iMac gets REALLY slow sometimes 30 seconds after I hit the pad to the time it hits midi monitor on the iMac. Luckily it hsn't happened at a show yet but it bothers me that it happens at all. I usually have to restart the…

Started by joebataz on

0 replies

Updated

Troubleshooting

8x8 switches, need to pass range of values on one cc

Hi, I'm a newbie with the Lemur and am having trouble figuring out of this is possible via the ipad editor. I want to make an 8x8 matrix of switches, with each switch transmitting a midi cc value of x (remains the same) and a value between 0 and 63 for each switch. All I have so far figured out is that the matrix will transmit different cc for each switch, but not a different value with the same cc. Sorry if my use of the terminology is confusing. Best, Jon

Started by monks1975 on

5 replies

Updated

Troubleshooting

Make Container not show onLoad

I am finnishing off my template and am running into a problem with a couple of containers that i want to hide when the template is loaded. I have tried several solutions but it always comes up. I tried an Onload script globally and in the Container interface with show (Container2,0); but it still shows up. I also tried to set the button that will hide the container when pressed to 1 but that didn't work either. In the manual therei is some info on certain circumstances where the onlad doesn't wo…

Started by electrofux on

4 replies

Updated

Troubleshooting

MU Devices not show up, everything else works.

Hi, I'm running MU with Ableton Live. I have everything connected and I'm able to trigger clips and control the mixer etc... all of this goes both ways so I know I have a connection. The problem I'm having is that when I try and choose a device, say Analog, or the Autofilter, they show up to be selected but when I select it I get no graphics at all to control from the MU template. It just goes right back to "Open device browser" Any reason why they device templates wouldn't be showing up? I copi…

Started by airyck on

2 replies

Updated

Troubleshooting

Can't remove KapturePad & Griid from MidiPorts

Hi, doing some cleaning up to try and pin point some stability issues in Ableton. I have Uninstalled both Griid & KapturePad from my PC but I cannot get rid of either in the Midi ports section in Live. I have reset Live by Deleting the files "Preferences.cfg", "Template.als" and "Undo.cfg" in all my version of Live and anything else relating to both products, but they are still listed. Anyone have any idea ? Thank you.

Started by Sibanger on

1 reply

Updated

Troubleshooting

Possible to make Knobs with custom Midi work bidirectional?

Hello, i have a Knob with a custom Midi sending cc#1 on Channel5. It is connected to a Filter-Knob in Reason. I know that Custom Midi does not work bidirectionally from the manual. I was hoping to construct a workaround with a script On Midi that listens to cc#1 on Channel 5. I want to use the Custom Midi in order to refactor my template which has non Custom Midi Controls for too many Lemur items and i am hoping to spare a couple by having control over the cc# and channel of each item and reuse …

Started by electrofux on

3 replies

Updated

Troubleshooting

user library not displaying images

Just uploaded a template and also included a screenshot but it doesnt show up....I have seen this also with other users' images..... Just to let ya know (I thought the users werent uploading screenshots but it seems there's a problem)

Started by Softcore on

0 replies

Updated

Troubleshooting

Need help with Menu

Hi, i have a Problem with the Menu Object. I have a button, a Menu and a global variable that saves the index of the currently selected Menu item when the button is pushed. The menu sets the text of a couple of Knobs according to the selection (i am selecting a Fx device for Send 1 in Reason with that Menu). I have a second menu that does the same for Send 2 (sets the text of the device in Send 2 in Reason) so i need a way to reset the first menu. Thats what the button was meant for. I want it t…

Started by electrofux on

2 replies

Updated

Troubleshooting

sending multiple ccs on different pad colums

hi, is it possible to send different note pitches from different columns of a pad object? for example if i create a pad, make 5 columns, can i assign a different cc for example note pitch to each different column? if so how thanks

Started by woodall57 on

2 replies

Updated

Troubleshooting

wifi inside a Faraday Cage

my new router solution is working fine at my home-studio which is in an old house in the mountains made of stone, Plaster and wood. But when I take this router and my iPads to our new music room in Zürich (concrete walls, floor and ceiling), I get wifi signal interruptions to my iPads every 30-40 seconds. After the interruption the connection is re-established, but the useability of any wifi-connected app is largely diminished. I understand that this music room is an almost ideal Faraday Cage. A…

Started by Phil999 on

1 reply

Updated

Troubleshooting

Device not recognised

Hi, Launching clips fine in Ableton from ipad and moving faders, but XY pad drums and keys don't seem to recognise when I select a device, any ideas, I am new to this...

Started by mangiedog on

0 replies

Updated

Troubleshooting

Install MU template

Hello, could somebody help me to install MU template please? How do i have to add it on my Ipad? I copied the MU folder in cycling 74 folder but i don't see MU in Ableton's browser. I have Ableton Live 9, Max for live 6.1, MU 1.2, Lemur Editor, Ipad 4 midi connected with camera connection cable. Will MU 1.2 work with ableton 9? Thank you

Started by Gab23 on

6 replies

Updated

Troubleshooting

Device Editors Not Showing

First post :D Hi everyone. Im running Mu 1.2 on lemur for iPad. For the most part everything is fully functional except that the device editors don't seem to be showing up. The device browser shows the devices in the ableton project accurately but when i select one to pull up device control i get nothing. Running Max 6 and Ableton 8.3.4 Many thanks for any help

Started by allthecolours on

2 replies

Updated

Troubleshooting

Daemon not seeing iPad

I have a problem ever since updating to lemur Daemon 4.0.1 and Lemur 4.0 on iPad Now everytime I start Lemur Daemon it does not recognize my iPad or see it at all. I've tried restarting my computer, the daemon, and my ipad. Nothing works. Any ideas? Anyone having a similar issue? I've tried different networks and everything. No idea what's going on. Thanks

Started by hipdeejay on

4 replies

Updated

Troubleshooting

How to fix improper octave switching?

Building on studio setup.jzml, I am using a pad array and a switch to create a keyboard with an octave switcher (see attached file). padkeyboard_1.jzlib.zip The pad array gives me a nice three octave keyboard (3 rows of 1 octave, lowest pitch in lower left, highest pitch in upper right). However, the octave switch transposes in 3 octave steps, not in 1 octave steps. How can I transpose in 1 octave steps? It seems I fail to understand the basic interaction of the octave switching vector and the p…

Started by sersch on

8 replies

Updated

Troubleshooting

hard times with time

Hi, I've started coding a little sequencer for HarmEx and would like to get a better understanding how this time variable works. I have: t1 = floor(time*(bpm*quarters)/minutes) <--(=time*(120*4)/60) for example) t2 = floor(t1%sizeof(pitches)) <-- pitches are the midi note values of chord, like {36, 40, 43} for a c maj. Now what I don't understand is this: assigning "floor(t1%sizeof(pitches))" to t2 in the editor tree works as desired. I can read it's constantly changing values in an OnFrame-trig…

Started by Rolix on

9 replies

Updated

Troubleshooting

Lemur Editor on win 8 ?

Hello, I just installed the editor on a win 8 machine. The application icon shows up in the available programs. When I click on it it I got the blue logo in the lower bar as it was open but it doesn't show any window. The Ipad on which Lemur is installed is not connected to the pc.

Started by unguitar on

26 replies

Updated

Troubleshooting

Lag on iPad 1 with lemur update

I just updated lemur for iPad. My iPad is the first one. And lemur was running smooth on it until the update that includes in app editing. I was wondering if anyone knows of a way to revert to the last version. Or to decrease the amount of lag on the first iPad.

Started by Cscairney on

0 replies

Updated

Troubleshooting

Is it possible to change the interface via a script?

I know i have read somoething about this somewhere but the search function is not a friend of mine. "interface" is a too common word for the forum search to work- btw "search" is acctepted :?: Anyways, i want to change the interface by the press of a button. Is that at all possible?

Started by electrofux on

1 reply

Updated

Troubleshooting

monophonic pads?

I need a monophonic keyboard with last note priority. I'd like to use a pad or a switch array for it. the challenge: the "radio" behavior, combined with "paint" behavior, of the switch object seem ideal for accomplishing this, but unfortunately, the switch object does not tell me for how long a finger is holding a switch – only the pad object does this. so I need to either recreate the "radio" behavior with the pad object (the pad seem to be in paint behavior anyway) – or find out the touch dura…

Started by sersch on

0 replies

Updated

Troubleshooting

iPad showing up in lemur daemon, connect button doesn't work

Hi, This is my first apple product, and I'm having a bit of trouble connecting to lemur daemon. I used loopMIDI to setup a connection to my computer, and my iPad shows up in lemur daemon, but when I press the connect button nothing happens. I tried double clicking as well, but no dice. Is there something I'm missing here? Windows 8 x64 iPad 4th generation

Started by zmat0571 on

1 reply

Updated

Troubleshooting

How do I send a increment value to a fader with a button?

I have multiple faders that controls paning. I would like to have a button that sends de value of 17 on a grided fader(33) to put the values back to the center. (reset Paning) Thanx!

Started by jenz on

4 replies

Updated

Troubleshooting

Sending a faders current value with a button

I have the following question I cannot solve myself, need some help; I have 4 faders on a remote midimixer I want to controll with one and the same fader in lemur , with different cc numbers, same midichannel, same lemur out. Only one fader should be "on"at a time, the other faders should be set to zero by a switch (radiobutton with 4 choices). All faders should be set to the same "current value" when "in use". I came up with 2 possible solutions, both not fully working: Reset all unselected con…

Started by jbgeluid on

6 replies

Updated

Troubleshooting

Live 9/windows 8 not showing lemur daemon

I seem to be able to connect the ipad to the program on my laptop. But when I open live, the daemon isn't showing anything. I have the in/out ports set to 0...past that I am not sure what I am missing. thoughts?

Started by matte on

8 replies

Updated

Troubleshooting

connection issues

Hello, I am running a template for controlling Cubase 6.5 on a windows XPsp3 computer, using the latest XP, Lemur deamon and ipad software. The tempate uses 8 in and out ports, (midi 0-7), on the pc I have Midiyoke running as well as "bome miditranslator" to take care of all the connections to Cubase. I have made so many ports because my template is complicated, I run 2 MCU controllers and 6 generic remotes in Cubase, alll connected to their own ports, some sending Sysex or NRPN, some just contr…

Started by jbgeluid on

7 replies

Updated

Troubleshooting

How to make Template with a choice of 50 markers in Cubase ?

Hello everyone. I'd like to use my Ipad and Lemur as a music player control. I have one track with 50 songs and cycle markers (one song = one marker). I need to setup Cubase and Lemur to have each song/marker under particular bottom with the names etc. Simply i'd like to have playlist in Lemur with play/stop and some other options which I know how to do. The problem is that Cubase allows me to choice markers from 1 to 9. Meybe someone have other Idea how to do it, for example : 50 different trac…

Started by mysticgs on

9 replies

Updated

Troubleshooting

TIP for using multiple network cards (Lan+Ad Hoc) on windows

I struggled with my new (great working) usb- wireless ad hoc dongle for lemur on my desktop studio computer, as I could not acces the internet anymore on my dektop computer while connected to the ad hoc network. (Had to turn of the internal card in my computer to get the dongle working). This was a bit of a bore, I need to constantly upload files to the internet in my studio. had to disconnect lemur, connect to the internet and vice versa all the time. After some research I found a great solutio…

Started by jbgeluid on

0 replies

Updated

Troubleshooting

Container Scripting

Hello I just bought Lemur for my iPad and Im currently working on my new template. And I've got some experience from touch OSC, but Im running into the next thing. Im totally new to scripting and I want to script a tabbed container with some custom buttons. I want the a container with 3 tabs which are transparent and 3 buttons to switch between the tabs. I know that I can just turn of the "Show TabBar" but the Tabbuttons a just too small and I can't resize them. Does anyone know how to scrip thi…

Started by Amplus on

3 replies

Updated

Troubleshooting

Any way to change container tabs through osc message?

Or have the tabs transmit an OSC message when they are selected on the lemur template? I'm making a M4L device with tabs and am trying to synchronize the tabs on screen in Ableton with the container tabs in the Lemur template.

Started by Rtech on

3 replies

Updated

Troubleshooting

Are page tabs always alphabetical?

I have two page tabs, so I guess two separate interfaces, in a single lemur template. I can't find any way to arrange them other than the default alphabetical order. The User manual mentions alphabetical, and not much after that. Is there any way to have them not be alphabetical?

Started by Rtech on

1 reply

Updated

Troubleshooting

triggering custom midi

I have a pad object ("Pads") with 12 collumns and 8 rows and i want each pad to trigger a custom midi Note ons and offs. So i have inserted a custom Midi note on and noteoff into the pads object. But i am struggeling to set the trigger field. Setting it to Pads.x doesn't get me any midi output (target is set). I have checked some other templates but couldnt figure out how they did it (scaleomat for example). Searching for custom midi in the forum doesnt work either ("custom midi" is a too common…

Started by electrofux on

3 replies

Updated

Troubleshooting

Hopefully a simple one...

I have a pad matrix of 96 pads which are supposed to send out Midi Notes. I want to display the last hit notenumber/Padnumber in a Monitor object. I fiddled around with the firstof function but fail at making this work.

Started by electrofux on

4 replies

Updated

Troubleshooting

Static Multicolors in Pad object?

Hi, I am new to Lemur. 44 years old, located in Germany, and bought the app to replace several mini USB fader and keyboard controllers for use with my Octatrack and a MIDI synthesizer, both of which are connected to an iConnect. I'd like to create a standard monophonic MIDI keyboard using the Pad object. In order to get a better overview of where I am on my virtual keyboard, I'd like to color individual pads to get somewhat akin to the familiar "ebony and ivory" key pattern. I thought using "mul…

Started by sersch on

3 replies

Updated

Troubleshooting

How to adress settab() in a container

Hej, I have following problem: I want to adress settab() (changed by a script inside a CustomButton) of a container inside of another container. If the CustomButton executing the script and the container are on the same level it can simply be adressed by settab(container, INT). But if the container is inside another container I don't know what to write for [containerpath] as in settab([containerpath], INT)... another problem related to the above issue is, that I also don't know how to get the me…

Started by trhqx on

1 reply

Updated

Troubleshooting

Adhoc network problem? Or traktor issue?

Hello out there! I have just spent the last couple of hours (like so many others) trying to get Lumer to work on an ad hoc network. I'm connecting to a PC laptop and my new ipad 4 running ios 6.1.2. I have managed to get both connected on an adhoc network, tested the connection using the Liine editor by hitting the 'play' button and selecting the ipad (with its static ip I had assigned) then clicking the 'synchro' button. All seems to be working fine! I was quite excited as I thought I had crack…

Started by Martytheparty on

3 replies

Updated

Troubleshooting

Using a button to temporarily reveal a container

I'd like to have a container holding several buttons appear and fill the screen when I push a custom button object, then vanish the first time I press any one of the buttons contained in it. Am I headed in the right direction experimenting with the show script? Thus far I haven't been able to make it work. Once I've gotten that script to work, then to hide the container again I guess I just need a script that watches all of the container's buttons for a change of state? Would that be an if/else …

Started by XRM5 on

10 replies

Updated

Troubleshooting

A single push = a single trigger.

Hey, bit of a n00b here. Only just made the switch from TouchOSC to Lemur. With that being said, in TouchOSC I used to be able to create a push button where no matter how many times I pushed the button, it would trigger a single sample every time I pushed it. When I create a custom button or pad in lemur, it seems to only trigger a sample every 2 times I push it. The first time I push it, the sample triggers (and the ON state is on the iPad) and the second time does nothing (yet the OFF state is…

Started by andifall on

1 reply

Updated

Troubleshooting

Feedback from Daw/Plugin to Lemur

Hi :D I would like Lemur Ipad to show/reflect the Plugin values of Diva (softsynth) If i have two instances of Diva running I would like Lemur on the Ipad to show Adsr, filter values etc relevant to the active plugin instance. Right now Lemur shows the control values I set in Lemur and I can control the plugin. However when I change to another instance of the plugin it does not update to the new values of the new instance. This way I constantly have to watch Lemur and then the computer monitor t…

Started by Morten on

0 replies

Updated

Troubleshooting

Any MIDI setups known to properly receive SYSEX into Lemur?

Hello, I'm trying to receive a SYSEX dump from my DSI Evolver into Lemur through my iRig interface. The size of the data received by Lemur is inconsistent - the data is truncated but not to a consistent length. Searching the forums I found that other people have experienced similar issues. Has anybody got this working consistently, and if so using what hardware? In my case the total data size is 220 Bytes so it fits within the 256 Byte limit for Lemur arrays. If I request a different type of dum…

Started by bint on

19 replies

Updated

Troubleshooting

Problem with Custom Button

hi, i´d like to create a simple daw-control but i have some problems with the custom button and ableton. i want to control the solo-button in ableton with a custombutton(switch) but i just works properly with a custombutton(pad). the solo button in ableton reqiueres the signal like a pad(x=1 and x=0). with the switch i have to tap it twice. i can use the custombutton(pad) but when solo is on, i would like to have an optical feedback on my custombutton(pad), so its still red(in my case). i hope y…

Started by agentsmith23 on

7 replies

Updated

Troubleshooting

How do i activate a KBMouse out target in the Daemon

I am having problems understanding the concept. I went to the Daemon and hit add and double clicked on Mouse and Keyboard and the i was asked to select a source port but there is none. Thought it would detect my mouse and keyboard or soemthing along this line. How is this done?

Started by electrofux on

1 reply

Updated

Troubleshooting

New problem with scripted pad action

Now that I can't set a pad to 1 Upon another pad reaching zero, How do I get recipient pad to act normal upon expression I.e. turn on and slowly release To zero? So far script is: On expression x mode reach zero post.x=1

Started by tput73 on

0 replies

Updated

Troubleshooting

script to control custom button with pad??

Deep into lemur with Traktor but I cannot for the life of me figure out how to make a custom button send a midi message right when pad release is to 0. Can anyone help?? thanks T

Started by tput73 on

5 replies

Updated

Troubleshooting

Plugiator by USE Audio

Hello Folks I got my hands on Plugiator but i am having a problem with seeing plug ins interface in sound manager. I am using OSX 10.7.5 Lion. USE Audio website provides download for individual plugins but they are in " PIL" file format and i am not sure how to open it . Any help will be appreciated. Jon

Started by januszk on

0 replies

Updated

Troubleshooting

Tempo sync/quantization problem ABreakpoint 2 in Ableton

I've had the ABreakpoint 2 set up in Ableton for a couple of weeks and enjoy the randomness, but I couldn't really use it with any beats because it generated notes with no timing. Earlier this evening I went to a friends house and all of a sudden it was in sync, and holy frijoles it was amazing. It was inspiring enough to where I left my friends house because I wanted to play around with it uninterrupted. I get it home and set back up, and it's not in sync anymore, and the note patterns sound li…

Started by Treppert on

2 replies

Updated

Troubleshooting

help monitoring midi from lemur in m4l

Is there someone that can explain to me why, when using the m4l patch midi monitor test.zip joined, the midi channel stay on 1, even if the controller is on channel 4 (but in the same time, the box for ctrl change works ok, even for a controller on channel 4). I don't get it…

Started by frz on

4 replies

Updated

Troubleshooting

Serious problems with Lemur+Mu running over Adhoc

Hey guys, I'm having a really frustrating problem that sounds similar to a lot of the others discussed here, but not quite the same, and I've been as yet unable to find a solution for it. As much as I don't like the idea, I'm starting to think I'm going to have to ditch Lemur and go back to an APC. I'll start at the beginning... I was originally running iOS 5, Live 8.2.6 and OSX 10.6.8, and all was well. I'd just create an adhoc network with DHCP and off I went. Countless gigs went down without …

Started by benlikesound on

2 replies

Updated

Troubleshooting